One Synth Challenge #137: HY-Poly by HY-Plugins (Voting Started!)

VST, AU, AAX, etc. plug-in Virtual Instruments discussion
nenneb
KVRist
146 posts since 8 Dec, 2015

Post Thu Jul 30, 2020 11:32 am

Hi everybody,
here is my submission to OSC-137. Seven HY-Poly-Free's and one classic-reverb in MuTool 8.6.15
https://soundcloud.com/user-935392739/inmemoriamr
Hope you like it!
Feedback is welcome, but more I need your high-votes ;-)

ElVincente
KVRist
69 posts since 22 Jun, 2019

Post Thu Jul 30, 2020 12:47 pm

Hi,

Here's my submission for hy-poly OSC chalenge
https://soundcloud.com/user-637213504/navid-chyld

I used Reaper 6 with
23 Hy-Poly (free)
Cocoa delay (modulation off)
Dragonfly plate & hall
Event Horizon clipper (free one include in reaper js)
Loudmax
Reaeq
Reacomp
MS_side_hp js by witti

Comments are very welcome (bad and good !)
Cheers

Aro
KVRist
67 posts since 16 Mar, 2018 from Canada

Post Fri Jul 31, 2020 2:38 am

Hey Everyone,

This month's entry. A one track composition.

https://soundcloud.com/lionsclub-1/the-hy-seas

I initially wanted to add more than the four voices that Hy-Poly allowed, but I was pleasantly surprised with the way that Hy-Poly chose voices and went with it. I think its top two and bottom two. Anyways, it created some melodies that I couldn't imagine myself, which I thought was neat.

Studio One 4
1 Hy-Poly
1 Pro EQ
1 Compressor

On FX bus:
Reverb
Compressor

*Edit:
Added on the Master bus...
1 Pro eq
1 multiband dynamics
1 limiter pre
1 limiter post

Thanks for listening!

User avatar
rockingricky
KVRist
88 posts since 18 Jan, 2010 from Germany

Post Fri Jul 31, 2020 11:33 am

Hello boys and girls,

this is my entry for this month ....
Made some attempts in the beginning of july, but then I was lacking in ideas ... :(
So it lasted until today to make this track (very quick) ready.

DAW: Cubase elements 9.5
18 instances of HY Poly
Cubase FX:
RoomWorks (reverb)
Dj-eq
Stereo Enhancer

free FX plugins:
OrilRiver
OTT_x64
TDR Kotelnikov
TAL-Filter 2
Dragonfly Plate Reverb
Melda Equalizer
Youlean Loudness Meter 2 free

https://soundcloud.com/rockingricky/all-that-hype

Hope you enjoy the track :wink:
Good luck to all and stay save ...

Juergen
KVRer
24 posts since 21 Jun, 2006

Post Fri Jul 31, 2020 1:35 pm

Here is my submission

https://soundcloud.com/user-221952934-5 ... vr-osc-137

DAW: Studio One 5.0

Synth: 18x HY-Poly Free

Studio One Effects:
Analog Delay : 3
Beat Delay: 1
Limiter: 1
Pro EQ: 2
Compressor: 1
Console Shaper: 1
Autofilter: 1
Channel Strip: 9

User avatar
Tj Shredder
KVRAF
4517 posts since 6 Jan, 2017 from Outer Space

Post Fri Jul 31, 2020 2:03 pm

I am not sure if this is a good idea, but Hy-Poly inspired me to something very minimal...
https://soundcloud.com/ondes-memorielle ... r-hy-drone
Played in one go, a single sound, I had to use 6 instances to be able to play it in MPE mode. Only Hy-Poly fx used.
I used a special tuning based on prime number overtones. I achieved that with a Max patch that would modify the Midi pitch bend accordingly...
DAW was Bitwig...

I must say this is a really good sounding free synth...

User avatar
bh9090
KVRist
320 posts since 7 Dec, 2006 from Richmond, VA, USA

Post Fri Jul 31, 2020 4:36 pm

https://soundcloud.com/hennessey/bh9090-trip-n

30 instances in Live 10 with Delays, Saturator, EQ8 and Compressors. Only non-DAW effect:

Valhalla Super Massive!

(it's awesome.)

Neptune
KVRist
75 posts since 11 Dec, 2007 from Bavaria

Post Fri Jul 31, 2020 4:58 pm

https://soundcloud.com/user-570157220/m ... ird-osc137

My Submission for this month. Hope its ok.

22x HY-Poly Free (1.0)
DAW: Cubase Elements 10.5
FX: DAW Reverb, Delay, Compressor, Limiter, Maximizer
Ext.FX: none

User avatar
ELEX
KVRist
63 posts since 29 Nov, 2019

Post Fri Jul 31, 2020 6:07 pm

My submission for this month's festivities, starting off in whole tone country, then venturing abroad for a bit.

https://soundcloud.com/elex101/miles-away

Made with REAPER and featuring HY-POLY FREE 1.0.0 (38 instances) as:
2 trumpets, 4 clarinax', 1 flute, 2 strings, 1 horn (2), 1 organ, 2 steeldrums ( well.. sort of ), 2 bright synth leads, 5 assorted short synths, 1 bell, 1 flutish stab, 1 not too special FX, 1 bass, 1 kick (2), 2 claps, 1 brush drum, 1 stick, 1 low tom (2), 3 toms, 2 cymbals

together with:

Oril River (17), ReaEQ (18), Limiter No6 (2), Hy-delay 4 free (4), Voxengo Stereo Touch ( 1), bx_solo (1), BlueARP (5), ReaControlMIDI (14), JS MIDI chorderizer, JS Chebychev filter (10)
Last edited by ELEX on Fri Jul 31, 2020 8:53 pm, edited 2 times in total.

User avatar
MalToné
KVRist
55 posts since 5 Dec, 2017

Post Fri Jul 31, 2020 7:37 pm

## SUBMISSION ##

Thank you @Eauson for sharing your presets, it really helped me understand this synth better. Thank you all for the inspiration!

https://soundcloud.com/chavapoulos/polyroma

DAW: Ableton Live 10 Suite

Hy-Poly Free x 23

Stock Ableton Effects:
Arpeggiator x 2
EQ8 x 13
Kick Compressor x 1
Delay x 2
Reverb x 1
Convolution Reverb x 6
Convolution Reverb Pro x 3
Auto Pan x 4
Mid Range Phattener x 3
Classical Compression x 1
Limiter x 1
Last edited by MalToné on Sat Aug 01, 2020 12:44 am, edited 1 time in total.
"I can't listen to the Ninth anymore at all."

User avatar
z.prime
KVRAF
1854 posts since 29 Sep, 2011

Post Fri Jul 31, 2020 9:20 pm

Hiya, so after some back and forth Tadashi was able to give a version that eliminated the phantom CPU issues I was having (thank you very much for that, sir!). So I thought it would be only fair to actually finish a track. I present to you, with much grandeur and fanfare, the amazing, most bestist thing ever to grace the interwebs, or something... !

z.prime - wHY?

https://soundcloud.com/z_prime/zprime-why

HY-Poly Free 1.0.75: ~ 60 instances

Bitwig 3.2.6 + plugins:
EQ+
Tool (finally has -inf!)
Delay-2
Saturator
Compressor
Dynamics
Blur (for delay)
Peak Limiter

Other plugins:
Xfer OTT
Valhalla Supermassive
Dragonfly Reverb Hall & Room
Orilriver
TDR Nova
vladg Limter no6
VennAudio FreeClip

+1 for the @ontrackp commercial plugin vote! :love:

What a nice synth HY-Poly ended up. Modulation is quite easy to do. I would suggest @Tadashi if you're reading this: get rid of the popup window and just open the editor in the lower section, it would be much better. I had to keep moving the popup windows out of the way, quite irritating. Otherwise, the plugin is design in quite a pleasant way, thank you for the free version!

Enjoy!
Last edited by z.prime on Fri Jul 31, 2020 11:58 pm, edited 1 time in total.

h.s.j.e.
KVRist
44 posts since 9 Jun, 2018

Post Fri Jul 31, 2020 10:02 pm

Okay. Here we go. *Yawn*
https://soundcloud.com/h_s_j_e/osc-137- ... ar-stagger

Reaper 6.13

HY-Poly x 26 (two muted - I just forgot to delete them)
Effects:
Dragonfly Hall x 2
Dragonfly Plate x 2
SPAN (on the master)
Youlean Loudness Meter (on the master)
Limiter No. 6 x 2
ReaEQ x 26
ReaComp x 2
MEqualizer (master)
ReaXComp 1
Transpire x 9

User avatar
H-man
KVRian
656 posts since 26 Dec, 2007 from Australia

Post Fri Jul 31, 2020 11:26 pm

Okay, my submission for the OneSynthChallenge #137

Cool Synth, very stable on my setup :tu:

https://soundcloud.com/hehirman/osc137-h-man-patterns

Track made with Ableton Live 10.1 and Hy-Poly free

Using: 39 separate instances of Hy-Poly free as well stock plugins from Live including:

On most tracks:
Utility
EQ Eight
Compressor

As well as:
Glue Compressor
Limiter
Reverb
Delay

User avatar
RuediRena
KVRian
509 posts since 23 Mar, 2011 from Schwerte, Germany

Post Fri Jul 31, 2020 11:50 pm

Don't like the synth. Sorry. I tried.

Making speech though was kind of cool.

So for your amusement here is the fragment I did before I lost inspiration and interest.

https://soundcloud.com/ruedirena/ruedir ... 3-fragment

Stay healthy you all!
Ruedi
Image

Hudeenee
KVRer
8 posts since 23 Dec, 2006 from Budapest, Hungary

Post Sat Aug 01, 2020 12:53 pm

Done with voting, good luck, fine people of OSC!

Return to “Instruments”