Cherry Audio Voltage modular

VST, AU, AAX, CLAP, etc. Plugin Virtual Instruments Discussion
Post Reply New Topic
RELATED
PRODUCTS Voltage Modular Core + Electro Drums$99.00Buy Voltage Modular Ignite$50.00Buy Voltage Modular Nucleus

Post

WasteLand wrote: Tue Oct 13, 2020 7:10 pm so the issue was only with non-standard vst directory? it didn't affect all users?
It absolutely did not affect all users. We've identified 3 people in total that were affected. The key was to override the default Windows VST2 installation folder, which included a subfolder of \DCO-106, and instead place the plug-in into a custom folder, without the \DCO-106, so that it shared a location with other files. Instead of just clearing out the old DCO-106.dll file, it went nuts and cleared out everything that was in the folder with DCO-106.dll.

The issue is absolutely resolved.

- Dan @ Cherry Audio
Top

Post

cherryDan wrote: Tue Oct 13, 2020 8:14 pm
WasteLand wrote: Tue Oct 13, 2020 7:10 pm so the issue was only with non-standard vst directory? it didn't affect all users?
It absolutely did not affect all users. We've identified 3 people in total that were affected. The key was to override the default Windows VST2 installation folder, which included a subfolder of \DCO-106, and instead place the plug-in into a custom folder, without the \DCO-106, so that it shared a location with other files. Instead of just clearing out the old DCO-106.dll file, it went nuts and cleared out everything that was in the folder with DCO-106.dll.

The issue is absolutely resolved.

- Dan @ Cherry Audio
ok, because i didn't tried it myself, i was curious, i wanted to know what went wrong. luckily, except for the users that were affected, it was rare case scenario.

i tend to place plugins, where they want themselves to be.. or all, except when the installer is bit a strange and chooses a plugin folder that isn't used, but exist (like pendulate), under common files/vst2. it seems an old way to do things... or when an installers forces you to choose..

o well.

glad it is resolved, and thanks for the information!
Top

Post

My VST install strategy is to install everything to V:\VSTPlugins so I would absolutely have had my plugin folder wiped on updating! Even more glad I read the forum first.
“Are you safe?”
"For now… a bit like a fish on the floor"
https://tidal.com/artist/33798849
Top

Post

I guess I was the 4th to be affected :hihi:
No big deal here, I was able to restore everything from my backups.

Just updated again and all good now :tu:
Top

Post

Cherry audio annihilating the competition :hihi:
Eyeball exchanging
Soul calibrating ..frequencies
Top

Post

Beat # 178 - 11/20 offers Voltage Modular Nucleus + Beat Magazine Bundle for free: https://www.falkemedia-shop.de/sound/be ... 20-english

The Beat Magazine Bundle contains 14 Andrew Macaulay modules:

1602618646270.png
You do not have the required permissions to view the files attached to this post.
Top

Post

gentleclockdivider wrote: Wed Oct 14, 2020 6:17 am Cherry audio annihilating the competition :hihi:
:D :party:

(while i am working in voltage modular now....)
Top

Post

future-bit wrote: Wed Oct 14, 2020 6:25 am Beat # 178 - 11/20 offers Voltage Modular Nucleus + Beat Magazine Bundle for free: https://www.falkemedia-shop.de/sound/be ... 20-english

The Beat Magazine Bundle contains 14 Andrew Macaulay modules:
o now i remember... i saw for a few ours, the beat bundle in store, weeks ago, and i thought is that the new thing? but it was strange, only say andrew macaulay modules and cherry audio modules, that i recognized.. when trying it, you came in a loop. trying to see what it was, in the store..
o well... but nice offer! macaulay modules i like!

it was in the store, or is, hidden..
Top

Post

cherryDan wrote: Mon Oct 12, 2020 8:26 pm Hi friends,

Today we've released an update to DCO-106, version 1.0.17, which fixes some issues with resizing the DCO-106 plug-in in certain DAWs, as well as some minor issues with the preset browser that turned up. In addition, DCO-106 is now compatible with macOS 10.9 and above (previously it required 10.11 and above).

We've also fixed an extremely rare crash that could occur when using the arpeggiator's "hold" mode.

We'd like to thank everyone for their support! DCO-106 has been a smash success and we're so glad everyone's enjoying it. Check this space in two weeks for a glimpse of what's coming next from Cherry Audio... 8)

- Dan @ Cherry Audio
So not sure why you guys aren't posting in separate threads for this stuff or did I miss something? I see a lot of conversation around DCO-106 which isn't a module. Had no idea about it until yesterday because it seems to be hidden in this thread. If I'm blind and there is something else forgive me but i look almost daily at the stuff here and mark everything read after I'm done ;) Please don't post news about non-Modular updates here. Use a new thread...they're cheap!
Top

Post

So I must be number 5 then. I wondered why all my vst's were gone yesterday. Now the penny drops as I start DCO 106 and thats when I noticed nothing else would load. Nothing left not even in the trash can. Really irritating and a really big waste of time. So off to install everything again.
Top

Post

future-bit wrote: Wed Oct 14, 2020 6:25 am Beat # 178 - 11/20 offers Voltage Modular Nucleus + Beat Magazine Bundle for free: https://www.falkemedia-shop.de/sound/be ... 20-english

The Beat Magazine Bundle contains 14 Andrew Macaulay modules:


1602618646270.png
Just bought the magazine on iPad but there are no instructions for what to do with the serials they sent me (for VM and DDMF The Strip). I already have VM so just wanted the Macaulay modules.
Top

Post

rezoneight wrote: Wed Oct 14, 2020 4:30 pm So not sure why you guys aren't posting in separate threads for this stuff or did I miss something? I see a lot of conversation around DCO-106 which isn't a module. Had no idea about it until yesterday because it seems to be hidden in this thread. If I'm blind and there is something else forgive me but i look almost daily at the stuff here and mark everything read after I'm done ;) Please don't post news about non-Modular updates here. Use a new thread...they're cheap!
viewtopic.php?f=296&t=553344
Top

Post

plopseaw wrote: Wed Oct 14, 2020 7:06 pm So I must be number 5 then. I wondered why all my vst's were gone yesterday. Now the penny drops as I start DCO 106 and thats when I noticed nothing else would load. Nothing left not even in the trash can. Really irritating and a really big waste of time. So off to install everything again.
Maybe this is a good time to start making backups. I got all my plugins back in less than 10 minutes.
Top

Post

aMUSEd wrote: Wed Oct 14, 2020 7:30 pm
future-bit wrote: Wed Oct 14, 2020 6:25 am Beat # 178 - 11/20 offers Voltage Modular Nucleus + Beat Magazine Bundle for free: https://www.falkemedia-shop.de/sound/be ... 20-english

The Beat Magazine Bundle contains 14 Andrew Macaulay modules:


1602618646270.png
Just bought the magazine on iPad but there are no instructions for what to do with the serials they sent me (for VM and DDMF The Strip). I already have VM so just wanted the Macaulay modules.
OK figured it out - first you have to download a password protected ZIP from the downloads page, which you access using a word from a page in the magazine, then you have to access a separate serials centre using another word from the magazine. They then send you an email which contains some 'serials' but no further instructions but I realised the VM 'serial' might actually be what opens the password protected ZIP (since it isn't accepted on the Cherry Audio registrations page) and it does - that then takes you to another page an Cherry Audio to access the modules - phew!
Top

Post

Now I've done it - once registered you also get some decent reductions in the store on the fuller Andrew Macaulay bundles.
Top
Post Reply

Return to “Instruments”