KVR Audio

e-crooner · Post by **e-crooner** » Tue May 25, 2021 7:53 pm

RobustAmerican wrote: Tue May 25, 2021 7:50 pm
e-crooner wrote: Tue May 25, 2021 7:34 pm I think it makes sense to disable it. If it were not like that, you could not use the pitch wheel as a second mod wheel because usually you do not want to modulate pitch and something else at the same time. And in those rare cases where you do, you can still do it via the mod matrix, which has more than enough slots for such a simple synth.
Thanks for the quick reply e-crooner! Seems like it would be easy enough to just set the pitch bend range to zero when you wanted to mod other parameters and not the pitch bend. Why else would there be a "0" amount for pitch bend range? It just adds another unexpected step and uses another mod slot but it isn't a show stopper by any means.

But wouldn't that pb range of 0 then also apply to the modulation range of whatever you want to modulate?

RobustAmerican · Post by **RobustAmerican** » Tue May 25, 2021 8:05 pm

e-crooner wrote: Tue May 25, 2021 7:53 pm
RobustAmerican wrote: Tue May 25, 2021 7:50 pm
e-crooner wrote: Tue May 25, 2021 7:34 pm I think it makes sense to disable it. If it were not like that, you could not use the pitch wheel as a second mod wheel because usually you do not want to modulate pitch and something else at the same time. And in those rare cases where you do, you can still do it via the mod matrix, which has more than enough slots for such a simple synth.
Thanks for the quick reply e-crooner! Seems like it would be easy enough to just set the pitch bend range to zero when you wanted to mod other parameters and not the pitch bend. Why else would there be a "0" amount for pitch bend range? It just adds another unexpected step and uses another mod slot but it isn't a show stopper by any means.
But wouldn't that pb range of 0 then also apply to the modulation range of whatever you want to modulate?

No, I have several presets where the pitch bend range is set to zero and the pitch wheel still works as expected for other assignments in the mod matrix.

e-crooner · Post by **e-crooner** » Tue May 25, 2021 8:14 pm

OK, good to know.

AnX · Post by **AnX** » Tue May 25, 2021 8:17 pm

the PB has a zero for uni pitch bends

AlesisVi61 · Post by **AlesisVi61** » Sun Jun 13, 2021 3:43 am

Richard_Synapse wrote: Sat Jun 20, 2020 3:19 pm Synapse Obsession is now available!

Obsession brings the power of a great polyphonic vintage synthesizer to your fingertips. It combines the astute modeling of voltage-controlled oscillators (VCOs), voltage-controlled filter (VCF) and voltage-controlled amplifier (VCA) with a comprehensive individual voice control that has never been done before.

I'm a huge fan of Synapse Audio & I recently purchased Obsession as an RE in Reason...but I don't believe Synapse Audio has cornered the market on the Oberheim simulation(as I've never heard a better softsynth than SonicProject's OP X Pro.)

https://www.sonicprojects.ch/opxpro2/description.html

The big draw for me with Obsession,is that it's also a rack instrument in Reason and I am a Reason purist and wish to stick with Reason-related synths only.

Rends · Post by **Rends** » Thu Jul 01, 2021 7:39 pm

Anyone else having problems wit Obsession nks files?
If i try to load a preset from the Maschine mk3 hardware it says „Obsession cannot be loaded.“ But i can choose Obsession AU from the plugin list in the software and it works.

Rends · Post by **Rends** » Fri Jul 02, 2021 12:48 pm

To answer myself. NKS works with vst only not AU. After installing the vst version everything works like expected.

RobustAmerican · Post by **RobustAmerican** » Wed Jul 28, 2021 6:36 pm

Howdy Pardners!

Volume I for O B S E S S I O N is now available!

Discount Code for KVR Members: KVR DISCOUNT

Use the code above when checking out to reduce our intro offer even more!
Thank You for Synthesizing!

zvenx · Post by **zvenx** » Wed Jul 28, 2021 7:27 pm

RobustAmerican wrote: Wed Jul 28, 2021 6:36 pm Howdy Pardners!

Volume I for O B S E S S I O N is now available!

Discount Code for KVR Members: KVR DISCOUNT

Use the code above when checking out to reduce our intro offer even more!
Thank You for Synthesizing!

Well that KVR Discount made it for sure a no brainer.
Thanks
rsp

RobustAmerican · Post by **RobustAmerican** » Wed Jul 28, 2021 7:39 pm

My pleasure zvenx! Thanks!

sqigls · Post by **sqigls** » Wed Jul 28, 2021 8:02 pm

bought, love the plucky stabby sounds

thank you

RobustAmerican · Post by **RobustAmerican** » Wed Jul 28, 2021 8:13 pm

Thanks sqigls! Try adding some fast aftertouch, after the initial attack with the pluckie plucks.

AnX · Post by **AnX** » Mon Sep 06, 2021 5:03 pm

Update:

Changelog v1.11 Mac-only (6-Sep-2021)

Native VST3 version added for Apple M1 machines.

The installer has been simplified, detecting whether a Mac computer is Intel or M1-based, then automatically installs the correct package.

Some Magic Mouse devices apparently send spurious mouse wheel messages. To combat this, drop-down menus like the preset menu no longer react to mouse wheel messages, in order to avoid accidental changes.

waltercruz · Post by **waltercruz** » Sat Dec 25, 2021 7:08 pm

$79 only until December 26th, 2021

It seems a bit cheaper on thoman (varies according country, VAT, etc)

https://www.thomann.de/gb/synapse_audio_obsession.htm

W23 · Post by **W23** » Mon Dec 27, 2021 3:05 am

waltercruz wrote: Sat Dec 25, 2021 7:08 pm $79 only until December 26th, 2021

It seems a bit cheaper on thoman (varies according country, VAT, etc)

https://www.thomann.de/gb/synapse_audio_obsession.htm

I’m glad I ran across this. I picked it up direct from Synapse for the same price, and I think the offer was just about to expire

Synapse Audio OBSESSION is now available!