N492ME V6.3 : Final Destination - Analog Obsession

[AnalogObsession]

Dual Mono, Stereo, Mid/Side N****nn style 4 Band Mastering Equalizer with High Pass Filter.

Features

- High Pass Filter : 20-80-140 Hz

- Low Shelf : 50Hz to 400Hz with +/-15dB

- Low Mid Band : 600Hz to 1000Hz with +/-15dB

- High Mid Band : 1000Hz to 7500Hz with +/-15dB

- High Shelf : 3kHz to 10kHz with +/-15dB

- MODE : Left/Right or Mid/Side Processing

- LINK : Linking Left/Right or Mid/Side

- M-BYPASS : Master Bypass to inactive whole system

- L-BYPASS : Left Channel Bypass

- R-BYPASS : Right Channel Bypass

- MASTER : Master Output

- Seperate Left/Right or Mid/Side Output Controls

Available Formats

VST/VST3/AU | Mac 10.9 - 11.X

VST/VST3 | Windows 7 - 8 - 10 - 11

VERSION 6.3 - 20.7.2022

- Fixed parameter link

- Fixed some minor bugs

- Added Touchscreen support

Patreon

[sokoleski]

Love this one.... very clear sounding and 'easy' eq to navigate

[AnalogObsession]

Love this one.... very clear sounding and 'easy' eq to navigate

Glad to hear! Enjoy!

[AnalogObsession]

Hi all!

Version 6.1 ready to download!

VERSION 6.1 - 16.7.2021

- Improved GUI on Retina
- Fixed right channel mute

[Hermetech Mastering]

Any chance of less resolution on the dB scale? I've been mastering professionally for over a decade now, and can't remember the last time I needed to use more than plus or minus 4dB, so 15dB seems ridiculously excessive. 0.25dB steps from plus or minus 6dB would be great.

[The Noodlist]

Link.
https://www.patreon.com/posts/all-download-34851999

[PCSRKS]

Hello Tunca! It would be very nice if you could update the PEQ, the Filteq, the Brutus and the Tube Limiter next, because I bought them a few years ago, and no update (VST3) since then, and I like them. Thanks!
Oh, and an update of the EAQ v2 and the OAQ would be nice too, before I forget.

[bmanic]

Any chance of less resolution on the dB scale? I've been mastering professionally for over a decade now, and can't remember the last time I needed to use more than plus or minus 4dB, so 15dB seems ridiculously excessive. 0.25dB steps from plus or minus 6dB would be great.

A switch to change the scale would indeed be very nice! However, at the moment, you can use mouse wheel scroll to go up/down in very fine increments (0.1dB usually per mouse wheel "tick").

[Hermetech Mastering]

at the moment, you can use mouse wheel scroll to go up/down in very fine increments (0.1dB usually per mouse wheel "tick").

Cheers, that's very good to know, I should give it a try.

[AnalogObsession]

Hi all!

Just released version 6.2!

Extended Low Mid Frequency range.

Thanks!

[sguyader]

Any chance of less resolution on the dB scale? I've been mastering professionally for over a decade now, and can't remember the last time I needed to use more than plus or minus 4dB, so 15dB seems ridiculously excessive. 0.25dB steps from plus or minus 6dB would be great.

This EQ is inspired by the hardware Neumann W492, which has also a +/-15 dB scale.

[Hermetech Mastering]

Any chance of less resolution on the dB scale? I've been mastering professionally for over a decade now, and can't remember the last time I needed to use more than plus or minus 4dB, so 15dB seems ridiculously excessive. 0.25dB steps from plus or minus 6dB would be great.

This EQ is inspired by the hardware Neumann W492, which has also a +/-15 dB scale.

The point being? It's not hardware, nor does it sound like the hardware, and still doesn't negate the fact that I can't ever remember using more than +/- 4dB in a mastering situation. bmanic already pointed out that you can adjust 0.1dB steps with the mousewheel, so it's a moot point now, the "problem" was already solved a few posts back... I might give it a try this week.

[Teksonik]

- LINK : Linking Left/Right or Mid/Side

Link doesn't seem to be working ? VST 2 Win 10.

[sguyader]

The point being? It's not hardware, nor does it sound like the hardware, and still doesn't negate the fact that I can't ever remember using more than +/- 4dB in a mastering situation. bmanic already pointed out that you can adjust 0.1dB steps with the mousewheel, so it's a moot point now, the "problem" was already solved a few posts back... I might give it a try this week.

The point being that despite how this plugin is announced, the Neumann W492 is not a mastering EQ, this explains the original +/- 15dB scale.
Yes I know it's not 1:1 clone, I was just trying to explain the reason behind the +/- 15 dB scale.

[AnalogObsession]

Hi all!

New version is ready to download! Please, check first post.

VERSION 6.3 - 20.7.2022

- Fixed parameter link
- Fixed some minor bugs
- Added Touchscreen support