Thanks! I guess they must be in there someplace, but most of those look more modern, like photo real rendered stuff. What I was thinking of was those wild, fast running ,often fractal looking things that almost had to be programmed by Deadheads. They were mostly distributed via email in the Windows 95 era.Shabdahbriah wrote: ↑Sun Aug 01, 2021 11:45 pmhttps://www.screensaversplanet.com/scre ... &order=ascguitarzan wrote: ↑Sun Aug 01, 2021 11:13 am While it’s on my mind again — and I am serious about this — I would love to find all those killer psychedelic screen savers from, say, the mid ‘90s thru the early 2000s and use them as visualizations somehow. I really miss some of those things! Some of them were super weird and truly mesmerizing… yeah, psychedelic… the colors man, the colors…
Poll : Would KVR benefit from a video forum?
- KVRAF
- 1651 posts since 3 Sep, 2005 from Outer Bongolia
- KVRAF
- 1651 posts since 3 Sep, 2005 from Outer Bongolia
It would be nice to have a good virtual analog video synth just to see if analog is something that would interest me without going down the video hardware rabbit hole. Lumen currently features Syphon input & output, so I would imagine the Windows version will feature Spout in & out. Please post if/when you hear more!
- Beware the Quoth
- Topic Starter
- 33177 posts since 4 Sep, 2001 from R'lyeh Oceanic Amusement Park and Funfair
More testing, this time of a Tamron Fotovix slide-to-video camera.
Testing the Tamron Fotovix works:
https://www.youtube.com/watch?v=aJdiwx21Sss
Testing the colour balance joystick on the Fotovix:
https://www.youtube.com/watch?v=Uyj7UX9tAM4
The most not-worst of 3 or 4 laughably poor DIY kaleidoscope thingies through the Fotovix:
https://www.youtube.com/watch?v=zGtF9SZNPxY
(Endgame here is testing the viability of very-small-scale ink-and-oil / kaleidoscopic 'light show' type effects. )
Testing the Tamron Fotovix works:
https://www.youtube.com/watch?v=aJdiwx21Sss
Testing the colour balance joystick on the Fotovix:
https://www.youtube.com/watch?v=Uyj7UX9tAM4
The most not-worst of 3 or 4 laughably poor DIY kaleidoscope thingies through the Fotovix:
https://www.youtube.com/watch?v=zGtF9SZNPxY
(Endgame here is testing the viability of very-small-scale ink-and-oil / kaleidoscopic 'light show' type effects. )
my other modular synth is a bugbrand
-
- addled muppet weed
- 105878 posts since 26 Jan, 2003 from through the looking glass
- KVRAF
- 1651 posts since 3 Sep, 2005 from Outer Bongolia
Interesting idea! I was actually considering going the other direction with extra large clock face glass for squish plates and smaller (but full size) glass for blow plates and swirl plates.whyterabbyt wrote: ↑Mon Aug 02, 2021 4:00 pm (Endgame here is testing the viability of very-small-scale ink-and-oil / kaleidoscopic 'light show' type effects. )
I don’t think I want to use overhead projectors though, probably just led light table under the plates with cameras on magic arms above to capture. I will be using high speed cameras on the physical effects (liquids and lumia, fog, mist, etc) for slo-mo options. Then I’d like to capture the entire “show” as raw video with my budget cine camera, using an anamorphic lens for cool vintage wide screen sci-fi movie look.
Still all just ideas, but I have the cameras and am slowly gathering other hardware and now with the help of this thread I have a good idea of what software I’ll want.
- KVRAF
- 5757 posts since 29 Sep, 2010 from Maui
Neat, where the heck did you find that thing. I never even heard of it before.whyterabbyt wrote: ↑Mon Aug 02, 2021 4:00 pm More testing, this time of a Tamron Fotovix slide-to-video camera.
Testing the Tamron Fotovix works:
Testing the colour balance joystick on the Fotovix:
The most not-worst of 3 or 4 laughably poor DIY kaleidoscope thingies through the Fotovix:
(Endgame here is testing the viability of very-small-scale ink-and-oil / kaleidoscopic 'light show' type effects. )
*I broke down and bought an elp webcam and a cheap capture card so as to be able to
get video into the Hypno. I'll probably get a fluxus duo at some point for the glitch
effects. So yeah that will put me at over $1k for the video synthesis thing (so far)
- Beware the Quoth
- Topic Starter
- 33177 posts since 4 Sep, 2001 from R'lyeh Oceanic Amusement Park and Funfair
Look Mum No Computer did a video about using one a couple of years ago, and it seemed kind of interesting. They're basically a predecessor of slide scanners.
Checked at the time, and they could be fairly cheap on ebay, ie they ranged between about £60-£150 so I bid on one, got it for about £40. When I received it, part of whatever it was held the lens unit in place seemed to have been damaged in transit, but it was easy enough to hot-glue in place.
And in fact Ive just won an auction today for a second one that seems to be basically be unopened and unused, for £25
The notion of using liquid type stuff on the slides stuff came from various youtube videos Ive seen over the years using ink/oil/water/milk whatever, like this but on a much smaller scale:
https://www.youtube.com/watch?v=F13B-k3ZsJs
plus trying to work out ways to make it move, ie piezo speakers to vibrate it, or motors, and hence things like the diy kaleidoscope idea.
my other modular synth is a bugbrand
- KVRAF
- 5757 posts since 29 Sep, 2010 from Maui
Neat! I try not to watch that guy as it only makes me want to spend money, even if it's lesswhyterabbyt wrote: ↑Mon Aug 02, 2021 10:47 pmLook Mum No Computer did a video about using one a couple of years ago, and it seemed kind of interesting. They're basically a predecessor of slide scanners.
Checked at the time, and they could be fairly cheap on ebay, ie they ranged between about £60-£150 so I bid on one, got it for about £40. When I received it, part of whatever it was held the lens unit in place seemed to have been damaged in transit, but it was easy enough to hot-glue in place.
And in fact Ive just won an auction today for a second one that seems to be basically be unopened and unused, for £25
The notion of using liquid type stuff on the slides stuff came from various youtube videos Ive seen over the years using ink/oil/water/milk whatever, like this but on a much smaller scale:
plus trying to work out ways to make it move, ie piezo speakers to vibrate it, or motors, and hence things like the diy kaleidoscope idea.
money. Of course, I did just finish my first DIY module ever! The Hypno expander, the kit
consisted of the face plate and that's it. I had to source the extension, HDMI ribbon cable
and the screws. Then I had to assemble it and bolt it all together
I went with locking nuts, so it wouldn't come apart. Anyway, baby steps
You do not have the required permissions to view the files attached to this post.
- KVRAF
- 1651 posts since 3 Sep, 2005 from Outer Bongolia
That video has some great ways to make the liquids pop in 3D — I’m pretty sure every bit of it could be used with old school hippy liquid light techniques too.whyterabbyt wrote: ↑Mon Aug 02, 2021 10:47 pm The notion of using liquid type stuff on the slides stuff came from various youtube videos Ive seen over the years using ink/oil/water/milk whatever, like this but on a much smaller scale:
https://www.youtube.com/watch?v=F13B-k3ZsJs
plus trying to work out ways to make it move, ie piezo speakers to vibrate it, or motors, and hence things like the diy kaleidoscope idea.
A very simple old school light show idea for movement that would probably work for you is the idea of a blow plate — just use a straw to gently blow air across the surface of the liquid, or have a fan blow air across the surface for automated but random movement. You can also just give the whole thing a spin. Your idea of using surface transducers is something I’ve thought about too — that would be automated and synched to the soundtrack. Please keep us updated on your liquid light experiences!
Steve Pavlovsky’s YouTube channel, Liquid Light Lab, has all kinds of tips and techniques used in the classic psychedelic light shows, you could probably find some ideas that could be applied to your miniature liquid setup.
https://youtube.com/user/LiquidLightLab
- KVRAF
- 5757 posts since 29 Sep, 2010 from Maui
Looking at the Hypno again, indeed there is a Raspberry on the back of it...
Seems like most of the digital video synths are that way, e.g. eyesy and the
Structure as well (though I think maybe the structure has more than 1 chip).
*Heh, the Hypno actually does a lot more stuff than I thought as I hadn't watched the
video. Internal modulation and whatnot.
Seems like most of the digital video synths are that way, e.g. eyesy and the
Structure as well (though I think maybe the structure has more than 1 chip).
*Heh, the Hypno actually does a lot more stuff than I thought as I hadn't watched the
video. Internal modulation and whatnot.
- Beware the Quoth
- Topic Starter
- 33177 posts since 4 Sep, 2001 from R'lyeh Oceanic Amusement Park and Funfair
Im intending to make something similar up for one of my Nebulae (also a RasPi), but it'll have to be a homemade faceplate.pekbro wrote: ↑Mon Aug 02, 2021 11:29 pmOf course, I did just finish my first DIY module ever! The Hypno expander, the kit
consisted of the face plate and that's it. I had to source the extension, HDMI ribbon cable
and the screws. Then I had to assemble it and bolt it all together
I went with locking nuts, so it wouldn't come apart. Anyway, baby steps
IMG_0325.jpg
my other modular synth is a bugbrand
- Beware the Quoth
- Topic Starter
- 33177 posts since 4 Sep, 2001 from R'lyeh Oceanic Amusement Park and Funfair
Yup, that was something else I was going to try out. Ive got some PC case/card fans in a box somewhere, one or two of them are fairly small 'blower' type could maybe be 'directed' with tubing. Also got some very tiny pager/mobile phone motors.guitarzan wrote: ↑Mon Aug 02, 2021 11:37 pm A very simple old school light show idea for movement that would probably work for you is the idea of a blow plate — just use a straw to gently blow air across the surface of the liquid, or have a fan blow air across the surface for automated but random movement.
Idea, ideas, ideas....
my other modular synth is a bugbrand
-
- addled muppet weed
- 105878 posts since 26 Jan, 2003 from through the looking glass
it's a microscope?whyterabbyt wrote: ↑Tue Aug 03, 2021 9:12 amYup, that was something else I was going to try out. Ive got some PC case/card fans in a box somewhere, one or two of them are fairly small 'blower' type could maybe be 'directed' with tubing. Also got some very tiny pager/mobile phone motors.guitarzan wrote: ↑Mon Aug 02, 2021 11:37 pm A very simple old school light show idea for movement that would probably work for you is the idea of a blow plate — just use a straw to gently blow air across the surface of the liquid, or have a fan blow air across the surface for automated but random movement.
Idea, ideas, ideas....
what about simply placing it on a speaker?
- Beware the Quoth
- Topic Starter
- 33177 posts since 4 Sep, 2001 from R'lyeh Oceanic Amusement Park and Funfair
No, its not got that level of magnification. It says 3x on the lens, whereas the toy microscope Ive got goes to 400x !!
Yup, that too, though it would have to be very shallow in terms of its height, there's only about 3-4" between the lens and the slide. Unfortunately the direct speaker output on my Koma Field Kit is borked, or I would have tried that.what about simply placing it on a speaker?
my other modular synth is a bugbrand
-
- addled muppet weed
- 105878 posts since 26 Jan, 2003 from through the looking glass
ah i see.
i might try some cymatics type stuff with oils on water.
the main issue is mounting my "camera" as it's either my phone or the endoscope, but im sure i can knock something up...
i might try some cymatics type stuff with oils on water.
the main issue is mounting my "camera" as it's either my phone or the endoscope, but im sure i can knock something up...