BetabugsAudio - FLOFIdeluxe [released]
-
- KVRian
- 717 posts since 30 Apr, 2004 from Jerusalem, Israel
-
- KVRAF
- 2495 posts since 18 May, 2004 from ATL-USA
And I thought I was lazy...
It can be found in the first post of this thread. Click on the link in light-green colored text.
I'm truly enjoying this plug, hats off to the dev. I expect to be using this a lot in the future.
It can be found in the first post of this thread. Click on the link in light-green colored text.
I'm truly enjoying this plug, hats off to the dev. I expect to be using this a lot in the future.
Anti-aliasing is for "synthmonk%ys".
-
- Banned
- 22457 posts since 5 Sep, 2001
[DELETED]
-
- KVRAF
- 1981 posts since 26 Oct, 2003 from Toronto
Yes!
Really works well in Orion and WaveLab for me! A very subtle lo-fi, but quite the enhancer for drums so far for me. 
A bit CPU heavy though, shoots Orion up about 10+%
But other than that it's a great sounding and working plug for me. Definately keep this in my aresenal.
Thanks!
A bit CPU heavy though, shoots Orion up about 10+%
But other than that it's a great sounding and working plug for me. Definately keep this in my aresenal.
Thanks!
-
- KVRAF
- 8389 posts since 11 Apr, 2003 from back on the hillside again - but now with a garden!
Sorry folks! Been up to Sheffield this w/e, but back now.
For those who liked it - super! Glad to be of service.
For those it didn't... hmmm..
@tl - you're the first case of it not working in Tracktion.. looks like it might be a system spec issue.. tho' I'm not using any SSE/3D-Now instructions.. I'll have another poke around.. I assume by +6.5db, you mean 6.5%processor usage.. +6.5db is awfully loud silence!
@ttoz.. what are you feeding into it to get the buzzing? can you post an mp3? does the sound change if you change preset, or fiddle with the knobs?
I will look into optimising the code, but want to get the host bugs sorted first..
DSP
For those who liked it - super! Glad to be of service.
For those it didn't... hmmm..
@tl - you're the first case of it not working in Tracktion.. looks like it might be a system spec issue.. tho' I'm not using any SSE/3D-Now instructions.. I'll have another poke around.. I assume by +6.5db, you mean 6.5%processor usage.. +6.5db is awfully loud silence!
@ttoz.. what are you feeding into it to get the buzzing? can you post an mp3? does the sound change if you change preset, or fiddle with the knobs?
I will look into optimising the code, but want to get the host bugs sorted first..
DSP
-
- Banned
- 22457 posts since 5 Sep, 2001
[DELETED]
- KVRian
- 736 posts since 8 May, 2002 from ... , germany
Ok, I did some additional testing in Tracktion, and I have to correct myself:
basically FloFi works without problems. But in my first tests I inserted FloFi in a signal chain
where it was followed by DigitalFishphones' Dominion, this combination caused & still causes
the strange PLOP I described before.
After this PLOP sound the level meter stays at +6.5db,
but there's no sound put out anymore.
tl.
basically FloFi works without problems. But in my first tests I inserted FloFi in a signal chain
where it was followed by DigitalFishphones' Dominion, this combination caused & still causes
the strange PLOP I described before.
No, I really mean +6.5db:I assume by +6.5db, you mean 6.5%processor usage.. +6.5db is awfully loud silence!
After this PLOP sound the level meter stays at +6.5db,
but there's no sound put out anymore.
tl.
-
- KVRAF
- 8389 posts since 11 Apr, 2003 from back on the hillside again - but now with a garden!
thx for getting bach to me guys...
@tl: this is super news! wrt to holding +6.5db, I gues that's a Tracktion internal issue, rather than a VST one...
@ttoz: if you can do a short 10-20 second burst, render to mp3, zip & send to kvr at dsparsons dot co dot uk (you know the form!), I would be most grateful. I still can't replicate it. Does that static change when altering the knobs, or is it fixed. Again, do the presets alter anything?
again, really appreciate the feedback..
Duncan
@tl: this is super news! wrt to holding +6.5db, I gues that's a Tracktion internal issue, rather than a VST one...
@ttoz: if you can do a short 10-20 second burst, render to mp3, zip & send to kvr at dsparsons dot co dot uk (you know the form!), I would be most grateful. I still can't replicate it. Does that static change when altering the knobs, or is it fixed. Again, do the presets alter anything?
again, really appreciate the feedback..
Duncan
-
- KVRAF
- 8389 posts since 11 Apr, 2003 from back on the hillside again - but now with a garden!
oh yes, and wrt to hosting, you could look into www.uklinux.net and www.web1000.com, both of whom provide free webspace, pretty much no strings attached. The uklinux is basically an ISP, so if you dial into them it's 'free', or pay £30/yr to avoid the need to dial.
I use both, and have had one problem with each, both times server failure, but they were up again within 24hrs...
HTH
DSP
I use both, and have had one problem with each, both times server failure, but they were up again within 24hrs...
HTH
DSP
-
- KVRist
- 43 posts since 7 Sep, 2004 from Aarhus > Denmark
cool plugin.. but i works only on Audio channels.. Not instrument channels..
when i put it on a instrument channel, i get that PLUG sound and a very high suuuummmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm!

when i put it on a instrument channel, i get that PLUG sound and a very high suuuummmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm!
-
- KVRian
- 742 posts since 22 Jun, 2004
Really?? Okay ill get on to that tonightjust so you know, the installer leaves a betabug folder in the start menu after uninstallation
Paul
__________________________
Paul Chana
Senior Software Engineer
FXpansion Audio UK Ltd
Paul Chana
Senior Software Engineer
FXpansion Audio UK Ltd
-
- Banned
- 22457 posts since 5 Sep, 2001
[DELETED]
-
- KVRAF
- 12977 posts since 29 Sep, 2003 from Ottawa, Canada
What's an instrument channel, and which instrument is causing the suuuuummmmmmmmmmmmmmmmmmmmmm?PSYPOX wrote:cool plugin.. but i works only on Audio channels.. Not instrument channels..
when i put it on a instrument channel, i get that PLUG sound and a very high suuuummmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm!![]()
![]()
![]()
![]()
In Tracktion, I put it on a track that has an instrument and no worries. Does it do it with all instruments tested, or just a specific one? Which host are you using, and what resolution of audio?
Sorry for all the questions-- not badgering, just investigating.
Greg
-
- KVRAF
- 1981 posts since 26 Oct, 2003 from Toronto
For what it's worth, I put FloFi on a master insert in OP 5.8, and it's handling feeds from VSTi channels AND audio channels simulataneously.
No problems here for me either way.
No problems here for me either way.




