Behringer EDGE

Anything about hardware musical instruments.
Post Reply New Topic
RELATED
PRODUCTS

Post

chk071 wrote: Mon Dec 20, 2021 8:02 pm
Yadrichik_Chaya wrote: Mon Dec 20, 2021 7:58 pm
chk071 wrote: Sun Dec 19, 2021 6:14 pm
Yadrichik_Chaya wrote: Mon Dec 13, 2021 9:10 pm I will just ignore all Behringer and the Music Tribe affiliated companies… Can't get enjoyment of a piece of gear knowing how bad all working there actually felt/feel…
Actually, you don't know that. At all.

Maybe you would feel better if Behringer closed their factory, and sent back the people to farm labour, where they get a shit, compared, and have to work even harder.
What is it that I don't know at all?

Since Glassdoor is a legit professional website the workers leaving bad review after bad review surely know what it is like working for Behringer…
I trust that the actual employees know best about the situation.
Yes, because sites on the internet where you can leave your feedback after you've just been sacked are such a good indicator for working conditions everywhere.

Again, you know nothing about how god/bad workers feel there.
But the horrible conditions mentioned in the reviews are the same regardless if written 10 years ago or 2 years ago. So even if these ex-employees all got sacked and decided to write trash reviews, like you like to think, all the reviews have a common thread/theme to them of how it actually is there, mentioning the very same things… That says a lot!
Reading the actual reviews would be a good start. :tu:
Fusion

Post

Using your head would be a good start. Unless you think everyone is forced to work at such companies. Why do they work there, if conditions are so horrible? As I mentioned, they could always go back to farm work. For much less money, and much more horrible working conditions.

Post

Oh, just noticed the price did come out end of October as $219
https://www.synthanatomy.com/2021/10/be ... other.html

Yeah, that’s a tad less than a DFAM

Are you safe?
"For now… a bit like a fish on the floor"
https://tidal.com/artist/33798849

Post

chk071 wrote: Mon Dec 20, 2021 8:17 pm Using your head would be a good start. Unless you think everyone is forced to work at such companies. Why do they work there, if conditions are so horrible? As I mentioned, they could always go back to farm work. For much less money, and much more horrible working conditions.


Yeah why would anyone who is a musician and/or passionate about music want to work for a music company that creates music gear? :clap:
I have to start using my head… :help:
At first it might seem like a dream come true but once you get this dream job it begins to look like a nightmare, especially after reading the reviews about working at Behringer…

Do you have anything more to add to the discussion or can we just let this thread be about the upcoming Moog DFAM clone Edge? If you have nothing more to say, take care! :hug:
I myself have nothing more to say. I've made my point.
Fusion

Post

Yadrichik_Chaya wrote: Mon Dec 20, 2021 7:46 pm

Cool Audio chips? I only have stuff from Boss/Roland/EHX/Korg/
I doubt there are Cool Audio chips in any of these gadgets, but who knows maybe there is? :?:
Clearly shows you do not have a clue.
Cool Audio chips have been used in other big name manufcturer products for years, and basing buying decisions based on disgruntled ex employees is laughable to the extreme.
Ableton Live 12/Push 3/Roland Juno X & TR-1000/Sequential Pro3se/Waldorf Iridium Core/Empress Reverb/Boss PX-1

Post

Yadrichik_Chaya wrote: Mon Dec 20, 2021 8:37 pm Do you have anything more to add to the discussion or can we just let this thread be about the upcoming Moog DFAM clone Edge? If you have nothing more to say, take care! :hug:
I myself have nothing more to say. I've made my point.
Yeah, a great point in a thread about a Behringer product. "Yo, dudes, I don't buy anything anymore from these inhumane slave drivers!!". Awesome. :P That's the kind of stuff I want to read everywhere really, because, it adds so much to the topic to read the personal views of self-important individuals.

Post

Goony wrote: Mon Dec 20, 2021 9:03 pm
Yadrichik_Chaya wrote: Mon Dec 20, 2021 7:46 pm

Cool Audio chips? I only have stuff from Boss/Roland/EHX/Korg/
I doubt there are Cool Audio chips in any of these gadgets, but who knows maybe there is? :?:
Clearly shows you do not have a clue.
Cool Audio chips have been used in other big name manufcturer products for years, and basing buying decisions based on disgruntled ex employees is laughable to the extreme.
Any links to lists of all products using cool audio chips? So I finally have a clue.
Give me the big names. The bigger the better…
I doubt coolaudio technology which Behringer aquired in year 2000 is in stuff from Roland/Boss since Roland have even sued Behringer…
In 2005, Roland Corporation sued to enforce Roland's trade dress, trademark, and other intellectual property rights with regard to Behringer's recently released guitar pedals. The companies came to a confidential settlement in 2006 after Behringer changed their designs.
So no coolaudio technology in Roland/Boss stuff prior to 2005 and certainly not after.

Well it not only the employees reviews, there is other stuff like the quote above about being sued. Others have of course also sued Behringer + a great deal more controversy…

A pirate has found a way to clone ”his” treasures. :borg:
Fusion

Post

Yadrichik_Chaya wrote: Mon Dec 20, 2021 9:36 pm

Any links to lists of all products using cool audio chips? So I finally have a clue.

[
Do your own research, which you shouldve done before thinking your clever. Keep digging your own hole fella.
Ableton Live 12/Push 3/Roland Juno X & TR-1000/Sequential Pro3se/Waldorf Iridium Core/Empress Reverb/Boss PX-1

Post

Yadrichik_Chaya wrote: Mon Dec 20, 2021 9:36 pm


In 2005, Roland Corporation sued to enforce Roland's trade dress, trademark, and other intellectual property rights with regard to Behringer's recently released guitar pedals. The companies came to a confidential settlement in 2006 after Behringer changed their designs.
So you would rather support companies that openly rip off the end customer then!!

https://www.theguardian.com/business/20 ... 20industry.
Ableton Live 12/Push 3/Roland Juno X & TR-1000/Sequential Pro3se/Waldorf Iridium Core/Empress Reverb/Boss PX-1

Post

chk071 wrote: Mon Dec 20, 2021 9:07 pm
Yadrichik_Chaya wrote: Mon Dec 20, 2021 8:37 pm Do you have anything more to add to the discussion or can we just let this thread be about the upcoming Moog DFAM clone Edge? If you have nothing more to say, take care! :hug:
I myself have nothing more to say. I've made my point.
Yeah, a great point in a thread about a Behringer product. "Yo, dudes, I don't buy anything anymore from these inhumane slave drivers!!". Awesome. :P That's the kind of stuff I want to read everywhere really, because, it adds so much to the topic to read the personal views of self-important individuals.
Sorry that it was due to my personal views that all those employees wrote those bad reviews. I should not really influence people to do something like that - inflicting my self-important personal views that also somehow leads to many companies suing Behringer… My self-importance is grand, but I can keep it at check…sometimes. Unlike Uli Behringer's
registration of the trademark KIRN… :tu:
Fusion

Post

The personal decision you made, based on feedback you read on an internet site, was to never buy a Behinger product anymore. Which is fair enough. But, shouldn't be of importance for this thread, and a topic which is being discussed over several pages.

It's as important to me as if a bag of rice drops in China. I'm here to read about Behinger's products. Not to read about political opinions of single users.
Last edited by chk071 on Mon Dec 20, 2021 9:55 pm, edited 3 times in total.

Post

WatchTheGuitar wrote: Mon Dec 20, 2021 8:17 pm Oh, just noticed the price did come out end of October as $219
https://www.synthanatomy.com/2021/10/be ... other.html

Yeah, that’s a tad less than a DFAM
Great price, now we just await the release date.
Ableton Live 12/Push 3/Roland Juno X & TR-1000/Sequential Pro3se/Waldorf Iridium Core/Empress Reverb/Boss PX-1

Post

Goony wrote: Mon Dec 20, 2021 9:47 pm
Yadrichik_Chaya wrote: Mon Dec 20, 2021 9:36 pm


In 2005, Roland Corporation sued to enforce Roland's trade dress, trademark, and other intellectual property rights with regard to Behringer's recently released guitar pedals. The companies came to a confidential settlement in 2006 after Behringer changed their designs.
So you would rather support companies that openly rip off the end customer then!!

https://www.theguardian.com/business/20 ... 20industry.
Are you stating this dilemma to me as a proud korg NTS-1 owner or as an angry korg NTS-1 owner? :oops:
Fusion

Post

chk071 wrote: Mon Dec 20, 2021 9:51 pm The personal decision you made, based on feedback you read on an internet site, was to never buy a Behinger product anymore. Which is fair enough. But, shouldn't be of importance for this thread, and a topic which is being discussed over several pages.

It's as important to me as if a bag of rice drops in China. I'm here to read about Behinger's products. Not to read about political opinions of single users.
Well my first post in this thread was: ”Cool, I wanna buy this drum machine”, but then I obviously changed my mind.
I respect the fact that this thread is about Edge and I will now leave the thread! :)
Fusion

Post

Yadrichik_Chaya wrote: Mon Dec 20, 2021 9:57 pm
Are you stating this dilemma to me as a proud korg NTS-1 owner or as an angry korg NTS-1 owner?
Just stating the fact that no company is innocent, and they all have their skeletons in their own closets, proving my point that you are clueless very blinkered, yet you try to preach others your blinkered view is laughable.

Now back on topic.
Cant wait to get this little colourful beast :)
Ableton Live 12/Push 3/Roland Juno X & TR-1000/Sequential Pro3se/Waldorf Iridium Core/Empress Reverb/Boss PX-1

Post Reply

Return to “Hardware (Instruments and Effects)”