RapidComposer Keyswitch Articulations

Post Reply New Topic
RELATED
PRODUCTS

Post

RapidComposer Keyswitch Articulations

This tutorial is for the Full version that allows you to save keyswitch articulations to any notes in your phrases.

(For RapidComposerLE you can create "Key Switches" for you Virtual Instrument articulations, these are left in Absolute mode so they don't change note as you move them across the chord track, save them with the same name as the Phrase they belong with 'My Riff 004' 'My Riff sw 004' so My Riff 004 might have a slide or bend switch that goes with it. To do it easily I suggest the Full version)

In C:\Users\USER\Documents\RapidComposerV3\DB
You will have your vst's info Kontakt 5.dll.rcINST that is created when you add a vst to RapidComposer
we just create a new text file and rename it Kontakt 5.rcCTRL
we drag it into Notepad to edit
add your instrument in the green text area

Be aware of your keyswitch positions, some programs call middle C (note #60) C4, some other vendors call it C3,
so my keyswitches in Kontakt were on C0 qctave in RapidComposer they were being played on C-1 so in the text Kontakt 5.rcCTRL I had to move them to the C1 octave. As you play the phrase you will see the keyswitches being triggered by RapidComposer.
## Controller and articulation definitions

controllerset= "
Kontakt 5";
controller={name="Modulation"; num=1; default=0; },{name="Volume"; num=7; default=64; },{name="Expression"; num=11; default=100; },{name="Control 20"; num=20; default=64; },{name="Control 21"; num=21; default=0; },{name="Control 22"; num=22; default=0; },{name="Control 23"; num=23; default=10; },{name="Sustain"; num=64; default=0; off=0; on=127; },{name="Legato"; num=68; default=0; off=0; on=127; },{name="Reverb"; num=91; default=64; },{name="Chorus"; num=93; default=0; };


group="The_Resonator"; articulation="Grace Note"; keyswitch="F1";
group="The_Resonator"; articulation="Trill Up"; keyswitch="G1";
group="The_Resonator"; articulation="Trill Down"; keyswitch="A1";
group="The_Resonator"; articulation="Up Silide"; keyswitch="A#1";
group="The_Resonator"; articulation="Down Slide"; keyswitch="B1;
group="The_Resonator"; articulation="Bend 1"; keyswitch="F#1";
group="The_Resonator"; articulation="Bend 2"; keyswitch="G#1";
group="The_Resonator"; articulation="Mute"; keyswitch="D#1";
group="The_Resonator"; articulation="Harmony"; keyswitch="E1";

group="Delta Blues Ac Slide Gtr"; articulation="Sustain"; keyswitch="G1";
group="Delta Blues Ac Slide Gtr"; articulation="Mute"; keyswitch="G#1;
group="Delta Blues Ac Slide Gtr"; articulation="Slide Up Fast"; keyswitch="A1";
group="Delta Blues Ac Slide Gtr"; articulation="Slide Up Slow"; keyswitch="A#1";
group="Delta Blues Ac Slide Gtr"; articulation="Slide Down"; keyswitch="B1";
group="Delta Blues Ac Slide Gtr"; articulation="Harmonic"; keyswitch="F1";
So now we have made and saved our Kontakt 5.rcCTRL for the Kontakt 5.dll.rcINST

Pic 1
We set the the track Instrument to Kontakt
Set the Controller Set to Kontakt
Set the Articulation Set to our Kontakt Instrument Delta Blues Ac Slide Gtr
Image


Pic 2
Set to Note Editing
Image


Pic 3
Set Articulation for note/s in phrase
Image


Pic 4
Switch back to Phrase Editing
Image


Pic 5
Save Phrase to your Custom Phrases e.g: To Group=Guitar/Acoustic/Delta, now you can drag n drop your phrases anywhere and it will fit to key/chord/scale and play the articulations.
Image

Image
Image
Last edited by crossovercable on Fri Feb 17, 2017 6:49 am, edited 1 time in total.

Post

thank you for this post. I see it's from 2 years ago, i wonder if it still applies. I wonder if this could be a method to change strings libraries from stacatto to spicato and legato and such...
So i have to create a file like that? I see some number there that I don't know what they mean like "name="Control 20"; num=20; default=64;" ... but then later i see note names like keyswitch="D#1";
That's all the part that I would know, say using a library like EastWest or Spitfire I might know something like C2 key changes something and D2 key changes to say spicato. Would this know to turn the other one off when switching?

Post

Just passing through but I'll comment.
The lines you don't recognize are midi CCs - continuous controllers.
Name string if you want, the controller number, and its default value - 64 being center for something like pan. (Didn't look up 20)

Post

The "controller=..." section lists the usable MIDI CC's.

This page has some help for this file:
http://www.musicdevelopments.com/wiki/d ... iculations

Basically you need to know the keyswitches and articulations for your virtual instrument. This should be in the documentation of the instrument.
Would this know to turn the other one off when switching?
No, a keyswitch does not send a "note off" for another keyswitch, but this is usually not needed.

Thanks,
Attila

Post

The link above to the wiki doesn't work anymore: https://www.musicdevelopments.com/wiki/

Unfortunately, the manual isn't really an ideal tutorial... The example above got me thinking in the right direction though, so maybe a similar example in the manual would help.

Post

Yes, the old wiki does not work anymore.
If you look for "Articulations" in the user guide, you'll find the same information.
I'd gladly reply to your questions if you need help.

Thanks,
Attila

Post


Post

Yes, of course, thanks, BluGenes!

Post

new solution coming soon!

Post

I can't wait anymore :hyper:

Post

it's finished! but delayed..

Post Reply

Return to “Tips & Tricks”