I thought it fitting to place this here, since there are some waterphone discussions in the effects section:
One of the more unusual instruments is the Waterphone, known for its creepy and chilling sound as a violin bow strokes the metal rods. If you’re unfamiliar with the Waterphone (which resonates due to a water tank in contact with vibrating metal rods), do search for it on YouTube. This is one of those ‘odd’ instruments that remained in the back of my mind for a few years, and when I came across Azzam Bell’s CROWN, I knew this was the right opportunity. The CROWN was inspired by the traditional Waterphone, but it has no water tank. Rather, it has three built-in microphones and an output, so that you can go straight to a mixer, a computer interface, etc., but more importantly, into effects!
This is where the CROWN shines, as you can produce countless sound effects and tones based on how you manipulate the rods (bow, percussion, friction), as well as contact with the metal base plate; however, think of how many guitar or other studio effects there are, and how those can be applied. The included demo is rather straight forward, in that I plugged into my Fractal Audio FM3 and used a few premade patches, including ‘Mr. Gilmour’ and ‘Ambient Guitar.’ I soon discovered that the CROWN can produce some pretty intense and dynamic sounds when matched with driven amps and cabs, never mind filters, step flangers, octave pedals, space reverbs, etc. Although this instrument may seem appropriate for incidental sounds and effects, it is very musical and can be integrated accordingly, which I attempted to do with the demo… putting it in context of a composition and with a very modern industrialized sound.
The quality of the CROWN is excellent, with a beech body/base, a brass plate and bronze rods, all of which are very resonant. Hand-made in Italy, you can find out more about Azzam Bell’s offerings through YouTube, their shop on Etsy, as well as Facebook. And if you think a Waterphone type instrument is unique, check out their Stone Harp and Cinematic Noise Generator (aka Micro Pipes). ETSY SHOP: https://www.etsy.com/shop/AzzamBells?re ... =853694712
CROWN (non-water Waterphone) demo
Anything about hardware musical instruments.
Moderator: KVR Moderators (Main)
CROWN (non-water Waterphone) demo
2022-06-14T11:42:40+00:00
I thought it fitting to place this here, since there are some waterphone discussions in the effects section:
One of the more unusual instruments is the Waterphone, known for its creepy and chilling sound as a violin bow strokes the metal rods. If you’re unfamiliar with the Waterphone (which resonates due to a water tank in contact with vibrating metal rods), do search for it on YouTube. This is one of those ‘odd’ instruments that remained in the back of my mind for a few years, and when I came across Azzam Bell’s CROWN, I knew this was the right opportunity. The CROWN was inspired by the traditional Waterphone, but it has no water tank. Rather, it has three built-in microphones and an output, so that you can go straight to a mixer, a computer interface, etc., but more importantly, into effects!
This is where the CROWN shines, as you can produce countless sound effects and tones based on how you manipulate the rods (bow, percussion, friction), as well as contact with the metal base plate; however, think of how many guitar or other studio effects there are, and how those can be applied. The included demo is rather straight forward, in that I plugged into my Fractal Audio FM3 and used a few premade patches, including ‘Mr. Gilmour’ and ‘Ambient Guitar.’ I soon discovered that the CROWN can produce some pretty intense and dynamic sounds when matched with driven amps and cabs, never mind filters, step flangers, octave pedals, space reverbs, etc. Although this instrument may seem appropriate for incidental sounds and effects, it is very musical and can be integrated accordingly, which I attempted to do with the demo… putting it in context of a composition and with a very modern industrialized sound.
The quality of the CROWN is excellent, with a beech body/base, a brass plate and bronze rods, all of which are very resonant. Hand-made in Italy, you can find out more about Azzam Bell’s offerings through YouTube, their shop on Etsy, as well as Facebook. And if you think a Waterphone type instrument is unique, check out their Stone Harp and Cinematic Noise Generator (aka Micro Pipes). ETSY SHOP: https://www.etsy.com/shop/AzzamBells?re ... =853694712
CoolGuitarGear
https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=478912
-
CoolGuitarGear CoolGuitarGear https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=478912
- KVRist
- 228 posts since 15 Nov, 2020
Post by CoolGuitarGear »
Post Reply
1 post
• Page 1 of 1
Return to “Hardware (Instruments and Effects)”
Jump to
- The Main Forums
- ↳ KVR Developer Challenge 2026
- ↳ KVR Studio Manager
- ↳ Getting Started (AKA What is the best...?)
- ↳ Instruments
- ↳ Effects
- ↳ Hosts & Applications (Sequencers, DAWs, Audio Editors, etc.)
- ↳ Guitars
- ↳ Mobile Apps and Hardware
- ↳ Soundware
- ↳ Samplers, Sampling & Sample Libraries
- ↳ Hardware (Instruments and Effects)
- ↳ Modular Synthesis
- ↳ Sound Design
- ↳ Production Techniques
- ↳ Music Theory
- ↳ Computer Setup and System Configuration
- ↳ DSP and Plugin Development
- ↳ DIY: Build it and they will come
- ↳ Music Cafe
- ↳ Machine Learning and AI for Music Creation
- ↳ Sell & Buy (+Special Offers, Deals & Promos)
- ↳ KVR Experts
- ↳ Everything Else (Music related)
- ↳ Off Topic
- ↳ Off Topic Classics
- Official Company Forums
- ↳ 2getheraudio
- ↳ accSone
- ↳ Acon Digital
- ↳ AcousticsampleS
- ↳ AcousModules
- ↳ Agitated State
- ↳ AIR Music Technology
- ↳ AMG
- ↳ Ample Sound
- ↳ Antares Audio Technologies
- ↳ Apisonic Labs
- ↳ APU Software
- ↳ apulSoft
- ↳ AriesCode
- ↳ Arts Acoustic
- ↳ Arturia
- ↳ Audjoo
- ↳ AudioSpillage
- ↳ Audiority
- ↳ Best Service
- ↳ Big Tick
- ↳ Bitwig
- ↳ Controller Scripting
- ↳ Blue Cat Audio
- ↳ Cherry Audio
- ↳ CWITEC
- ↳ Embertone
- ↳ energyXT
- ↳ Eventide
- ↳ Expert Sleepers
- ↳ forward audio
- ↳ Future Audio Workshop
- ↳ FXpansion
- ↳ g200kg
- ↳ Harrison Mixbus
- ↳ HG Fortune
- ↳ Homegrown Sounds
- ↳ HoRNet Plugins
- ↳ Ilya Efimov Production
- ↳ Image Line
- ↳ Impact Soundworks
- ↳ Indiginus
- ↳ Insert Piz Here
- ↳ Ju-X
- ↳ Kirk Hunter Studios
- ↳ Kirnu
- ↳ Kong Audio
- ↳ Krotos
- ↳ Kuassa
- ↳ KV331 Audio
- ↳ LennarDigital
- ↳ Les Productions Zvon
- ↳ Liqube Audio
- ↳ Loomer
- ↳ LVC-Audio
- ↳ Maizesoft
- ↳ Manytone Music
- ↳ Media Overkill (MOK)
- ↳ MeldaProduction
- ↳ Mellowmuse
- ↳ MIDIMood
- ↳ moForte
- ↳ Mozaic Beats
- ↳ mucoder
- ↳ MusicDevelopments
- ↳ Tips & Tricks
- ↳ MusicLab
- ↳ MuTools
- ↳ New Sonic Arts
- ↳ NUSofting
- ↳ Oli Larkin Plugins
- ↳ Orange Tree Samples
- ↳ patchpool
- ↳ Photosounder
- ↳ PlugInGuru
- ↳ Polyverse Music
- ↳ Precisionsound
- ↳ Premier Sound Factory
- ↳ Psychic Modulation
- ↳ Realitone
- ↳ Resonance-Sound
- ↳ Reveal Sound
- ↳ Roger Linn Design
- ↳ rs-met
- ↳ S3A: Spatial Audio
- ↳ SaschArt
- ↳ Smart Electronix
- ↳ sonible
- ↳ SonicBirth
- ↳ Sonic Reality / eSoundz.com
- ↳ Soundiron
- ↳ SPC Plugins
- ↳ Sugar Bytes
- ↳ TAL Software
- ↳ Tokyo Dawn Labs
- ↳ Tracktion
- ↳ Tweakbench
- ↳ u-he
- ↳ u-he Linux support
- ↳ United Plugins
- ↳ VAZ Synths
- ↳ Virharmonic
- ↳ xoxos
- ↳ XSRDO - SynthCraft
- ↳ ZynAddSubFX
- Site Stuff
- ↳ Site Stuff
- Archived Forums
- ↳ AlgoMusic
- ↳ easytoolz
- ↳ Elevayta
- ↳ Hollow Sun
- ↳ LinPlug
- ↳ Muse Research and Development
- ↳ Shuriken
- ↳ SoHa Sound Design
- ↳ Soniccouture
- ↳ Topten Software
- ↳ Valhalla DSP
- ↳ CK Modules & VST
- ↳ Sennheiser AMBEO
- ↳ Muon Software
- ↳ Westgatesounds.net
- ↳ Squaredheads
- ↳ Sonigen
- ↳ CFA-Sound
- ↳ Back In Time Records
- ↳ Livelab.dk
- ↳ Skytopia
- ↳ audioD3CK
- ↳ Inspire Audio
- ↳ Krakli
- ↳ Drumdrops
- ↳ Futucraft
- ↳ OverTone DSP
- ↳ RaXnTraX
- ↳ solar3d-software
- ↳ Signaldust
- ↳ Soundemote
- ↳ ReleaseLab (Powered by Artist Expansion)
- ↳ Wolfgang Palm
- ↳ UJAM
- KVR Forum index
- All times are UTC
- Delete cookies
