KVR Audio

carrieres · Post by **carrieres** » Thu Jul 28, 2022 12:32 pm

Hi Xavier,
I own XILS 3 LE but I don't find a link to upgrade to XILS 3 ?
Or the price to buy XILS 3 is already updated with the synths I own ?
My coupon are not yet applied ?
I am looking to buy XILS 4 and I try to get it at the cheapest price ...

sbj · Post by **sbj** » Thu Jul 28, 2022 2:27 pm

Hi XILS Lab

I noticed the following after installing the 1.6.1 update.

1). The max and current are swapped in the sequencer.

2). In the matrix under Extended the assignable slots are also Mirrored/Backwards

3). In the FX section there is a line missing between delay and chorus.

Kind Regards

S.B Jensen

XILS-lab · Post by **XILS-lab** » Sat Jul 30, 2022 7:44 am

carrieres wrote: Thu Jul 28, 2022 12:32 pm Hi Xavier,
I own XILS 3 LE but I don't find a link to upgrade to XILS 3 ?
Or the price to buy XILS 3 is already updated with the synths I own ?
My coupon are not yet applied ?
I am looking to buy XILS 4 and I try to get it at the cheapest price ...

Hi,

Thanks for your interest in the XILS 4.
Actually for XILS 3 LE onwers there is a coupons within your Xils account (My Coupons area) which gives you 20€ discount on the current offer (Only two days left!!). This coupons has to be submitted at the end of the checkout. If you've got any issue, just contact us: https://www.xils-lab.com/support/contact-us

Best regards

XILS-lab · Post by **XILS-lab** » Sat Jul 30, 2022 7:45 am

sbj wrote: Thu Jul 28, 2022 2:27 pm Hi XILS Lab

I noticed the following after installing the 1.6.1 update.

1). The max and current are swapped in the sequencer.
2). In the matrix under Extended the assignable slots are also Mirrored/Backwards
3). In the FX section there is a line missing between delay and chorus.

Kind Regards

S.B Jensen

Hi and thanks a lot for this report.
I'll check and fix that within a few days, uploading a new 1.6.1 beta within a week.

Best regards

geronimo · Post by **geronimo** » Sat Jul 30, 2022 10:06 am

I could be wrong but after various tests, I have the impression that in case of backup of its patches, the parameters of the four effects are saved except their On / Off switches.
Can you watch this?

And I couldn't find an erase patch function in the Saves table.

XILS-lab · Post by **XILS-lab** » Sun Jul 31, 2022 7:39 am

geronimo wrote: Sat Jul 30, 2022 10:06 am I could be wrong but after various tests, I have the impression that in case of backup of its patches, the parameters of the four effects are saved except their On / Off switches.
Can you watch this?

And I couldn't find an erase patch function in the Saves table.

You're right, I missed something with these siwtches. I'll fix that asap and it will be available in the next 1.6.1 beta.

I don't understand your last problem. Do you mean the Matrix preset menu ?

best regards

geronimo · Post by **geronimo** » Sun Jul 31, 2022 8:26 am

I forgot to specify that I am with recent version-beta 1.6.1. _
I will explain to you later my problem of presets because I am not with my computer.

geronimo · Post by **geronimo** » Sun Jul 31, 2022 9:27 am

XILS-lab wrote: Sun Jul 31, 2022 7:39 am I don't understand your last problem. Do you mean the Matrix preset menu ?

wanted to specify that I didn't know how to delete a patch from a Library from this window ?

And here, I don't find the Nicolas Jaussaud patches _

geronimo · Post by **geronimo** » Sun Jul 31, 2022 9:29 am

geronimo wrote: Sun Jul 31, 2022 9:27 am
XILS-lab wrote: Sun Jul 31, 2022 7:39 am I don't understand your last problem. Do you mean the Matrix preset menu ?
wanted to specify that I didn't know how to delete a patch from a Library from this window ?

And I don't see Nicolas Jaussaud's patches, mentioned in the text of the update in version 1.6. ! _

Examigan · Post by **Examigan** » Sun Jul 31, 2022 11:46 am

I haven't used it since the new browser was added, but I don't think you can delete the individual factory patches, just the user's patches. Also I just noticed when I go to Help menu the manual won't open. It is available on the main website though.

XILS-lab · Post by **XILS-lab** » Tue Aug 02, 2022 1:28 pm

Hi,

Examigam's right, you can't delete a factory preset. For a preset you created (or a preset from an imported bank), either in the preset manager right click on the preset and select delete, either launch the preset and within the toolbar preset menu, select delete:presetname.

The toolbar first menu (the one you selected, can only delete a whole criteria as bank, author, type, etc ... when authorized).

This way of managing preset is the same on all our synths. Anyway we are always opened for enhancement or adding new features if needed.

Hope that helps.

Best regards

geronimo · Post by **geronimo** » Tue Aug 02, 2022 4:24 pm

Yes, I found it but I thought you had to right click from the big Save window _
So it's much simpler, actually.

XILS-lab · Post by **XILS-lab** » Fri Aug 19, 2022 1:48 pm

Hi,

We just updated the 1.6.1 version of the XILS 4, fixing a couple of bugs.
https://www.xils-lab.com/products/xils- ... lInstaller

@sbj only the first issue you reported is fixed as I wasn't able to reproduce here.
Feel free to contact us directly, that might be easier for discussing this.
Thanks in advance

Best regards

lxegs · Post by **lxegs** » Fri Aug 19, 2022 2:51 pm

latest beta is buggy , cannot install without errors ..... no problem when installing 1.6.0 or older versions ....

W10 21H2

lalo · Post by **lalo** » Fri Aug 19, 2022 3:13 pm

lxegs wrote: Fri Aug 19, 2022 2:51 pm latest beta is buggy , cannot install without errors ..... no problem when installing 1.6.0 or older versions ....

W10 21H2

Confirmed Win11

XILS 4 version 1.6.0 available