New 'Reliq' Poly MPE Sequencer/Matrix/Modulation/DAW Controller/32 CV outs breakout box!

Anything about hardware musical instruments.
Post Reply New Topic
RELATED
PRODUCTS

Post

Indigo Campaign just about to go live, looks very interesting (I have paid VIP deposit- worked well for Osmose!)

https://get.reliq-instruments.com/

16 Polyphonic Sequencers
Control any instrument with 16 Polyphonic Sequencers, Euclidian and Stochastic Modes

High-resolution Recording
Record with high resolution, MPE and real-time parameter recording and 8 voice polyphony per track.

Generative & Diverse
Generate melodic and rhythmical patterns, apply midi effects and modulate with LFO and Envelope per track

A Modulation Factory
Draw Your Modulation: Automations, LFOs And Envelopes At Your Fingertips! Advanced CC Modulation,MPE Modulation, LFOs, and Envelopes per Track, Custom Modulation Waveforms

A Fully-Integrated DAW Controller
Control your DAW together with any Hardware through dedicated Reliq Scripts and the Reliq plug-in. Trigger Loops, Clips and record from Reliq, or control your mixer and Software instruments. Anything you need to stay tightly synchronised between any software and hardware.

A Full Range Of I/O For Always Staying Patched
3 x MIDI outs,
1 x MIDI IN
1 x USB-C MIDI
1 x USB HOST port
16 x gates ( 5~10V)
32 x CV outs (+/-5V ~ +/-10V)
1 x Reset out
1 x Clock out

A Modular Breakout Box
Reliq’s 32 CV outs, 16 Gates and 16x16 Matrix I/O comes in it’s own case. Powered directly from Reliq via USB-C or via eurorack power supply with a standard connector, reliq’s breakout can stay at any corner of your studio or in your eurorack case for staying always patched.

https://www.youtube.com/playlist?list=P ... YBqvqr2or-
X32 and 24C mixers, S88MK3, Live + PUSH 3, Osmose, RedShift 6, Pro3, S4, Tempera, Syntakt, Digitone, OP1-F, OPXY, TR-1000, Eurorack, TD27 Drums, Guitars, Basses, Amps and of course lots of pedals!

Post

If the term "MIDI 2.0" had appeared in that paragraph I think I'd have had a heart attack
I wish it went into more detail about the MPE, sure looks cool though
Pre-launch price of $1200 certainly seems cheap for the modular CV folks

Post

Here is the list of what is finalised for launch if it helps...

🔌 Matrix
16 Analog Inputs
16 Analog Outputs
Line Level, Eurorack Level and CV compatible
Clickless switching between connections
128 routings (patch presets) per project
Matrix-Mixer Sequencer Engine
High-Resolution amplitude control per individual input
High-Resolution amplitude control per individual output
Inputs/Outputs Grouping per amount of channels
Inputs/Outputs Grouping per connection type (CV/Audio/Control etc)
Custom naming for Inputs, Outputs and Groups.
Generative patching functions


🎛️ Sequencer

16 Sequencer Tracks
MIDI/CV/USB outputs per track
512 Steps Max Clip (pattern) length
128 Clips (patterns) per track
Clip follow-up functions
8 Voices of Polyphony Per Track
8 CC controls Per Track
Extensive Piano Roll mode
High-resolution Recording at 768 PPQN
MPE support
Step Sequencer Mode
Euclidian Mode
Stochastic Mode
Various directions per track
Isomorphic Keyboard modes with scale and percussive support
Real-time offset parameters per track
Parameter Locking
Probability per step
Micro-timing per step
Trigger condition per step
CC Per Step
Mute/Solo functions
Copy/Paste functions
Undo/Redo functions 

MIDI FX engine
Fixed Velocity
Crescendo/Decrescendo
Groove Accent
Randomise Velocity
Accelerando/Decelerando
Duration Re-mapping
Reverse Pattern
Time Shuffle
Length Quantisation
Randomise Duration/Position
Pitch Transposition
Reverse Pitch
Pitch Quantisation
Chord Generator/Chord Trigger
Randomise Pitch
Note Delay
MIDI Ratcheting


〜 Modulation

LFO and Envelope per track
CV modulation from 0.0001Hz to 60Hz
Internal Parameter Modulation
CC Modulation
MPE Modulation
Custom LFO shapes
128 Modulation slots (presets) per track
Modulation slots follow-up functions

💻 DAW Control Surface

Bitwig Support
Ableton Live support
Logic Pro Support
Support for more DAWs will become available in the future
Reliq dedicated Plug-in
High-precision synchronisation
Bi-directional control between any supported DAW and Reliq

🎚️ User Page

Custom MIDI/CC/CV mapping per encoder
Custom MIDI/CC/CV mapping per button
Custom Gate mappings
Open Sound Control Support for wireless control
Save and share your mappings with anyone

🎧 Song and Performance Modes

Trigger DAW clips, Sequencer Clips and Matrix routings from a single button
Create custom macros for optimal performance workflows
Custom Encoder offset parameter macros
Linear song mode based on clips, routings, modulation slots and DAW actions.

X32 and 24C mixers, S88MK3, Live + PUSH 3, Osmose, RedShift 6, Pro3, S4, Tempera, Syntakt, Digitone, OP1-F, OPXY, TR-1000, Eurorack, TD27 Drums, Guitars, Basses, Amps and of course lots of pedals!

Post

Included Breakout connector

Image
X32 and 24C mixers, S88MK3, Live + PUSH 3, Osmose, RedShift 6, Pro3, S4, Tempera, Syntakt, Digitone, OP1-F, OPXY, TR-1000, Eurorack, TD27 Drums, Guitars, Basses, Amps and of course lots of pedals!

Post

The campaign is live...

Oh, and the developer confirmed that the Reliq sequencer will record the MPE out of the Linnstrument. Very cool!

Post

<track thread/>
An idiot on Set Theory:
"In some cases there is an object called red that contains everything that is red. In much the same way a pot is a plate."

Post

it looks very cool, but seems too ambitious to be true somehow

Post Reply

Return to “Hardware (Instruments and Effects)”