Probably the only thing that makes sense is a MK2 Prologue & Minilogue incoming TBH...then everything will port to the new SDK...egbert101 wrote: Fri Jan 19, 2024 11:52 am And I think if we continue speculating, perhaps there is a mkii version of Minilogue XD in the works? Imagine 8 note polyphony and the new multiengine.
Korg NTS-1 : New Versions : New Mk2 and NTS3 Kaoss Pad
-
- KVRAF
- 12083 posts since 2 Dec, 2004 from North Wales
X32 Desk, i9 PC, S88MK3, S1, BWS, Live + PUSH 3, Osmose, RedShift 6 Pro3, Tempera, Syntakt, Digitone II, OP1-F, OPXY, Eurorack, TD27 Drums, Guitars, Basses, Amps and of course lots of pedals!
-
- KVRAF
- 8072 posts since 9 Jan, 2003 from Saint Louis MO
I was always curious about the Kaoss Pad in its various incarnations, but never pulled the trigger on one. Maybe this will be the one, particularly if Sinevibes drops some stuff for it...
-
- Beware the Quoth
- Topic Starter
- 35430 posts since 4 Sep, 2001 from R'lyeh Oceanic Amusement Park and Funfair
Not an NTS-1, you maybe posted in the wrong thread?egbert101 wrote: Fri Jan 19, 2024 3:35 pm New Opsix mkii version. Although basically the same with double polyphony.
An idiot on Set Theory:
"In some cases there is an object called red that contains everything that is red. In much the same way a pot is a plate."
"In some cases there is an object called red that contains everything that is red. In much the same way a pot is a plate."
-
Constructed Identity Constructed Identity https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=288890 - KVRian
- 1301 posts since 29 Sep, 2012 from Minnesota
The NTS-3 deserves it's own thread!
If Sinevibes converts their effects to run on it, we will have a monster controller....
GAS hitting hard
If Sinevibes converts their effects to run on it, we will have a monster controller....
GAS hitting hard
-
- Beware the Quoth
- Topic Starter
- 35430 posts since 4 Sep, 2001 from R'lyeh Oceanic Amusement Park and Funfair
Technically, its always been possible to replace the hardware controls of the NTS-1 with something else, though. There's documentation on it at the Korg github, alongside the SDK. Basically, the NTS-3 seems to be Korg doing that officially...
An idiot on Set Theory:
"In some cases there is an object called red that contains everything that is red. In much the same way a pot is a plate."
"In some cases there is an object called red that contains everything that is red. In much the same way a pot is a plate."
-
- Beware the Quoth
- Topic Starter
- 35430 posts since 4 Sep, 2001 from R'lyeh Oceanic Amusement Park and Funfair
I have a KP-3 and two Mini-KP. This is a lot closer to the Mini-KPs, I think, in that there doesnt seem to be any sampler side to it, just the effects.foosnark wrote: Fri Jan 19, 2024 12:51 pm I was always curious about the Kaoss Pad in its various incarnations, but never pulled the trigger on one. Maybe this will be the one, particularly if Sinevibes drops some stuff for it...
An idiot on Set Theory:
"In some cases there is an object called red that contains everything that is red. In much the same way a pot is a plate."
"In some cases there is an object called red that contains everything that is red. In much the same way a pot is a plate."
-
Constructed Identity Constructed Identity https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=288890
- KVRian
- 1301 posts since 29 Sep, 2012 from Minnesota
Yes, I wanted a Kaos pad years ago but never got one. I can understand why it is not backwards comparable to the 'logue' versions, but a few lines of code should be all that is required to get X-Y positional control on parameters in the effects.whyterabbyt wrote: Fri Jan 19, 2024 5:43 pmI have a KP-3 and two Mini-KP. This is a lot closer to the Mini-KPs, I think, in that there doesnt seem to be any sampler side to it, just the effects.foosnark wrote: Fri Jan 19, 2024 12:51 pm I was always curious about the Kaoss Pad in its various incarnations, but never pulled the trigger on one. Maybe this will be the one, particularly if Sinevibes drops some stuff for it...
Sounds awesome in theory - knowing Korg, they'll probably charge $400 for this kit.
-
- KVRAF
- 2402 posts since 3 Mar, 2010
How are you using this with your Eurorack - output from the synth to NTS-1, and then audio out from the NTS-1 (either from the audio out or headphone jack) to your headphones/DAW/recorder? I ask because I have a guitar pedal output module on my Eurorack system. I tried to use the NTS-1 as a send effect, running audio out from the Eurorack pedal module to the NTS-1 and then back to the pedal module, but the output from the NTS-1 is not powerful enough even to register back in the Eurorack.
-
- KVRian
- 948 posts since 25 Sep, 2014
I wonder if the pad supports MIDI over USB. I've been looking for something that can control joysticks in VST synths such as the Wavestate, D-50 and Prophet VS, which does not self-recenter like regular joysticks.
-
Constructed Identity Constructed Identity https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=288890
- KVRian
- 1301 posts since 29 Sep, 2012 from Minnesota
No, Not just effects- Sinevibes has a couple of oscillators that would be perfect for this: the bent waves one and the wavetable synth
-
- Beware the Quoth
- Topic Starter
- 35430 posts since 4 Sep, 2001 from R'lyeh Oceanic Amusement Park and Funfair
$169 according to the Synthanatomy article I linked to.Constructed Identity wrote: Fri Jan 19, 2024 5:54 pm Yes, I wanted a Kaos pad years ago but never got one. I can understand why it is not backwards comparable to the 'logue' versions, but a few lines of code should be all that is required to get X-Y positional control on parameters in the effects.
Sounds awesome in theory - knowing Korg, they'll probably charge $400 for this kit.
Also thinking that porting might be relatively straightforward. Some changes to the API for the drumlogue, but the main difference is probably just that they're not binary-compatible ARM variants processors. The full set of development tools for the four existng platforms / both classes of platforms have been integrated into a single Docker container, though, so that looks relatively promising.
An idiot on Set Theory:
"In some cases there is an object called red that contains everything that is red. In much the same way a pot is a plate."
"In some cases there is an object called red that contains everything that is red. In much the same way a pot is a plate."
-
- Beware the Quoth
- Topic Starter
- 35430 posts since 4 Sep, 2001 from R'lyeh Oceanic Amusement Park and Funfair
Yeah, sorry, badly stated that; just meant it didnt have the sampler of (some of) the full-size KPs. The minis have some synth presets too.Constructed Identity wrote: Fri Jan 19, 2024 5:59 pm No, Not just effects- Sinevibes has a couple of oscillators that would be perfect for this: the bent waves one and the wavetable synth
An idiot on Set Theory:
"In some cases there is an object called red that contains everything that is red. In much the same way a pot is a plate."
"In some cases there is an object called red that contains everything that is red. In much the same way a pot is a plate."
-
Constructed Identity Constructed Identity https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=288890
- KVRian
- 1301 posts since 29 Sep, 2012 from Minnesota
I doubt it will be $169, but if it is and if Sinevibes starts releasing his oscillators and effects for it it will be an insta-buy. The way my Prologue only has one (two) knobs for parameters on these is a crime.
-
- KVRAF
- 12083 posts since 2 Dec, 2004 from North Wales
Do you have a boost on the way back in? I am using https://busycircuits.com/alm006/bharris22 wrote: Fri Jan 19, 2024 5:56 pmHow are you using this with your Eurorack - output from the synth to NTS-1, and then audio out from the NTS-1 (either from the audio out or headphone jack) to your headphones/DAW/recorder? I ask because I have a guitar pedal output module on my Eurorack system. I tried to use the NTS-1 as a send effect, running audio out from the Eurorack pedal module to the NTS-1 and then back to the pedal module, but the output from the NTS-1 is not powerful enough even to register back in the Eurorack.
Attenuation of outgoing modular audio signal sent to external effects.
Amplification of returned audio signal to high modular signals (approx. 3db to 34db of gain)
X32 Desk, i9 PC, S88MK3, S1, BWS, Live + PUSH 3, Osmose, RedShift 6 Pro3, Tempera, Syntakt, Digitone II, OP1-F, OPXY, Eurorack, TD27 Drums, Guitars, Basses, Amps and of course lots of pedals!