UPDATED: Zynaptiq Morph3

[zynaptiq]

It's
a) on the morph downloads page, just scroll down past the v3 downloads https://www.zynaptiq.com/morph/morph-downloads/
b) In all emails and webpages of the upgrade registration process, there are v2.6 links, too.

-d

[ChamomileShark]

thanks!

[c_voltage]

The only difference between v2.5 and 2.6 is the copy protection. As to differences between classic v2 and classic v3 – will have a look at your video, thank you. Seems the difference in that particular case is mainly the amount of treble. I'd think this may be a case of boosting the wobbly synth sound a little.
In general, it IS a re-write, so there may be differences with some material. Notably, the windowing is cleaner now. But not anything substantial for making new sounds. For a 1:1 recall of your sessions, there's v2.6.

Ok thanks cool.

BTW found possible reason of this difference - in v2, we can hear output result even without activity of chained (sided) signal (but sidechain button should be enabled. EDIT: and XY (x-fade) joystick position should be in right\center).
It will sounds like filling main signal by white noise spectra (during silence at side of sided signal resp).
Whereas in v3 - no, there is no such "auto noise" behavior, just silence.

So, maybe high spectra presence in v2 (in certain timbre), it's like result of mix with white noise component. And value of such mixing may vary, depends from incoming sided spectra.

[Ou_Tis]

Does Morph3 Pro have any advantages over Morph 2 when gradually morphing one singing voice into another? For a smooth but obvious morphing effect, without a lot of bizarre artifacts? As in using automation to go from one voice to another and back.

[Sampleconstruct]

Using a Tremor drum machine beat to modulate/slice a field recording (tuna auction in Toyo I recorded some years ago) inside the Morph 3 modeler (via Style Transfer), then morphing the two signals with each other.

[c_voltage]

Hm with surrending was added two license locations instead single as before (Remix bundle here), not a big deal but nice.

[Dirtgrain]

Hm with surrending was added two license locations instead single as before (Remix bundle here), not a big deal but nice.

I had a hard time getting to work--if I did. I bought bundle upgrade. Used license in ilok, which showed success registering, and I activated the bundle. Then I could not open any of the VST 3 versions (this went to only Morph 2). I did get to open the VST 2 version of Morph 3. Is that normal?

[Dirtgrain]

I am unable to totally get rid of the dry signal. Pulling into the bottom left "A" corner of the morph panel, I can still hear the unaltered signal of B coming through--not very loud, but there.

Is this to do with the version I use (DualMonin, DualStereoin, Stereoin)?

[c_voltage]

I had a hard time getting to work--if I did. I bought bundle upgrade. Used license in ilok, which showed success registering, and I activated the bundle. Then I could not open any of the VST 3 versions (this went to only Morph 2). I did get to open the VST 2 version of Morph 3. Is that normal?

Mm no something definitely not how it should go.
Fun thing, i'm in contrary - did install only VST3 version of Morph (for both, v2 and v3) by some reason being sure that VST2 was discontinued, but now i'm figured that just mixed up it with news about 32bit version (the recent topic about leaving vst2 probably had its effect lol). But i'm fan of VST2, usually select it, thanks for headup.
Returning to question - did you sure that surendering was complete (special button for that) ? What meant "could not open" ? What in iLok manager ?

[c_voltage]

I am unable to totally get rid of the dry signal. Pulling into the bottom left "A" corner of the morph panel, I can still hear the unaltered signal of B coming through--not very loud, but there.

Is this to do with the version I use (DualMonin, DualStereoin, Stereoin)?

So, i did chek vst2 versions too, all works.
But observed some nuances:

- v3: in vst2 really have 3 dlls, as you mention. Whereas in vst3 just 2 variants ("Morph 3 Pro", and "Morph 3 Pro DualMonoIn", i used first variant, for all needs, in usual stereo track).
And, although vst2' variants (of v3) was works ok it seems too, but, during install (v3) i paid attention that checkbox for vst2 format disabled by default. Which got me thinking. This is some plugin' intuition lol. Additionally, it seems i managed to get used to v3 variant without additional inscription in name.

- v2 (2.6): In vst2 just single "MORPH VST", in vst3 two variants "MORPH" and "MORPH SC" (i used second).
But also i found that in v2.6 vst2 version there is lack of "align" button in UI, which is present in vst3 "morph sc".

Summarising both paragraphs, i decided to rollback to VST3 again for both Morphs, that i also advise to do for those who try to check this plugs first time, for an optimal experience.

So, for v2.6 it will be vst3 "MORPH SC", for v3 it will be vst3 "Morph 3 Pro".
(all for normal stereo track resp)

Edit: and during install VST3, do not change path please (despite such ability exists).

[ChamomileShark]

ilok has "performance issues" with activation right now in our region. Can't login to ilok and Cubase 13 is stalling at scanning VST3s at the moment.

[c_voltage]

v3.2.0 update online
Changelog https://www.zynaptiq.com/morph/morph-downloads/

[ChamomileShark]

thanks for the prompt.

[EfreetiSultan]

Cool plugin. But unable to use it on my old laptop. Empty project 48k 32bitfp cubase. Buffer size 2048 (maximum). Still unusable. Shame.
(Intel i5 2.4ghz)
Audio doesn't even play cause it drops out immediately

[DJErmac]

EDIT : solved. For some reason I had not received the new update but the previous one.

On my machine I have a serious, serious bug. I’m still trying to fix it myself, or hoping to find someone who experienced the same and already found the solution, before I give up and ask support.

For some reason I have a time-out to use Morph 3 in my Cubase on my Windows 10 64bit. After a certain time, something like 7 minutes, the graphic elements of the plugin go crazy. Everything becomes unclickable, and most parts of the graphics disappear one after one. You’re basically left with a background pic.

And what is the most annoying is that Cubase becomes totally broken after that. Any menu is either black or white or empty, and nearly no text exists anywhere.

Your only option is to close Cubase, and there’s no way to save your project in any way. If you try Ctrl+S, you’ll be asked if you want to replace the existing file, and you can’t in any way click (or hit "enter") in the empty box that’s here instead.

I’ve tried everything : VST2 and 3, Cubase (from 8 to 13) and Reaper, I’ve waited for many updates for my graphic card, I’ve fixed any Windows errors and disks errors, I’ve removed some Windows updates and installed the newer ones, I’ve uninstalled and reinstalled everything Zynaptiq-related, NO CHANGE in any way, always a few minutes before the final breakdown. Of course, this happens only with Morph 3 and no other plugin in the world.

A couple of notes : Cubase keeps on "working" after this glitch, sound keeps on playing. Even if broken, Morph 3 keeps on processing the sound, you just can’t modify anything anywhere in Cubase : you’re free to move your mouse wherever you want, there’s nothing to find in any menu.
For some reason this didn’t happen "at the beginning". Morph3 was working flawlessly until in wasn’t anymore. And I have no clue what triggered this.
As it’s happening everytime after a while, it almost looks like a zombie-mode timebomb : this is freakin’ creepy when you have no idea why it’s happening to you...

Nobody ever experienced this here ? Any idea, tip ? Thanks in advance.