[FREE] ConvertWithMoss - convert from/to WAV,Bitwig,SFZ,SF2,DecentSampler,MPC/Force,Wave-/Modwave/KMP,NKI,EXS) v17.1
-
- KVRist
- 446 posts since 26 Nov, 2007
By the way, I'm really impressed that you're staying on the cutting edge with the MPC updates, that's kind of amazing! I just updated to 3.4 myself, I'll test it as soon as I can. I have an idea for a couple PADSynth patches I need to make for the MPC, I've been doing it with trackers for a while I can't wait to see how it works out for MPC.
In the future there will be robots!
-
- KVRist
- 336 posts since 9 Apr, 2003 from Tragorden
Did anyone successfully convert to EXS yet?
-
- KVRist
- 135 posts since 15 Jul, 2004 from Ireland
Hi
any chance you mght add support for the Alesis Fusion to this program in the future.
any chance you mght add support for the Alesis Fusion to this program in the future.
-
- KVRAF
- Topic Starter
- 4868 posts since 13 May, 2004
Highly unlikely.billcar2004 wrote: Tue Nov 05, 2024 7:54 pm Hi
any chance you mght add support for the Alesis Fusion to this program in the future.
-
- KVRer
- 1 posts since 6 Nov, 2024
Hi! I'm currently tryna install this program in Windows 11. The .msi file downloads no problem, but when I try running it the installer does not pop up. Have I done something wrong? Is there no Win11 support?
-
- KVRAF
- Topic Starter
- 4868 posts since 13 May, 2004
Should work fine (I am on Windows 11 as well). Maybe try to run it as administrator?!KoshiSugawara wrote: Wed Nov 06, 2024 4:49 pm Hi! I'm currently tryna install this program in Windows 11. The .msi file downloads no problem, but when I try running it the installer does not pop up. Have I done something wrong? Is there no Win11 support?
-
- KVRer
- 1 posts since 18 Sep, 2024
Hi,
Mac M1 OS 13 (Ventura)
I followed all the manual and it seems to launch without errors.
Now when trying to convert or analyze i see the following:
Detecting and converting multi-samples...
Analyzing: /Users/h..... (correct folder)
Finished.
That it, no process happened.
what do i miss?
Thank you
Mac M1 OS 13 (Ventura)
I followed all the manual and it seems to launch without errors.
Now when trying to convert or analyze i see the following:
Detecting and converting multi-samples...
Analyzing: /Users/h..... (correct folder)
Finished.
That it, no process happened.
what do i miss?
Thank you
-
- KVRAF
- Topic Starter
- 4868 posts since 13 May, 2004
I have currently no plans for that.jahpooh wrote: Thu Nov 07, 2024 5:06 pm Any chance you could implement Kurzweil K2000/2500 file conversion please ?
-
- KVRAF
- Topic Starter
- 4868 posts since 13 May, 2004
What do you want to convert? Did you select the correct source format?Muledriver wrote: Sat Nov 16, 2024 7:40 pm Hi,
Mac M1 OS 13 (Ventura)
I followed all the manual and it seems to launch without errors.
Now when trying to convert or analyze i see the following:
Detecting and converting multi-samples...
Analyzing: /Users/h..... (correct folder)
Finished.
That it, no process happened.
what do i miss?
Thank you
-
- KVRer
- 2 posts since 17 Nov, 2024
Hi Jurgen,
Regarding the X-fade value for the Sample Robot to MPC keygroup, this is what i was talking about on youtube:
You can see the parameter marked in the image with red, it has a value.
In MPC the value is 0.
What do you think? Or maybe the value gets lost on the way in the Bitwig file format. Because exporting in bitwig format is the middle step.
Thanks!
Regarding the X-fade value for the Sample Robot to MPC keygroup, this is what i was talking about on youtube:
You can see the parameter marked in the image with red, it has a value.
In MPC the value is 0.
What do you think? Or maybe the value gets lost on the way in the Bitwig file format. Because exporting in bitwig format is the middle step.
Thanks!
You do not have the required permissions to view the files attached to this post.
-
- KVRAF
- Topic Starter
- 4868 posts since 13 May, 2004
Thanks for the report! Turns out the conversion of the value between Bitwig and MPC was not implemented. Will be fixed in the next update!papuci23 wrote: Sun Nov 17, 2024 6:44 am Hi Jurgen,
Regarding the X-fade value for the Sample Robot to MPC keygroup, this is what i was talking about on youtube:
Screenshot 2024-11-17 082830.png
You can see the parameter marked in the image with red, it has a value.
Screenshot 2024-11-17 083741.png
In MPC the value is 0.
What do you think? Or maybe the value gets lost on the way in the Bitwig file format. Because exporting in bitwig format is the middle step.
Thanks!
-
- KVRAF
- 2620 posts since 16 Jan, 2013
I've been dabbling a little with old AKAI S-series sample CDs (there's plenty to be found online in places like archive.org for example). Mainly with a couple of free and open-source tools I recently found: akaiutil and abrowse.
akaiutil can export the entire disc to a tar archive containing the program files and related sample data in either the original format or wav. abrowse will also convert the program files to xml. Though when previewing the extracted samples I noticed an audible click at the end of all the wavs from abrowse. Not sure of the cause.
It got me wondering if you would be interested in adding support for this format (the original programs and samples extracted from the disc)? I assume most or all of what you would need to know about the format will be documented by these two tools. There's also the older akaitools which is still in development.
akaiutil can export the entire disc to a tar archive containing the program files and related sample data in either the original format or wav. abrowse will also convert the program files to xml. Though when previewing the extracted samples I noticed an audible click at the end of all the wavs from abrowse. Not sure of the cause.
It got me wondering if you would be interested in adding support for this format (the original programs and samples extracted from the disc)? I assume most or all of what you would need to know about the format will be documented by these two tools. There's also the older akaitools which is still in development.