So, with it's release, is SynthMaster 3 the new reigning Super Synth?

[havran]

Seriously, I generally charge a lot for that type of consulting and here it is, laid as a gift at your feet.

You're fired.

[zerocrossing]

Seriously, I generally charge a lot for that type of consulting and here it is, laid as a gift at your feet.

You're fired.

Whew! That’s a relief. My job has been pretty busy lately.

[splinetime]

I have a LARGE number of soft synths (as in it's a mental health issue ) Just about all the major and quite a few minor models. I like Synthmaster(s). SM3 is definitely in my creative kit. My only complaint (for me the main issue) is the lack of a cohesive function by function manual. Having said that, I dig the small developer thing, understand it. Most of what I want can be figured out. it's just a bit of a hassle running around to the different net spots to hunt down info.

[MihJump]

Hi! Please tell me, is there a random LFO in Synthmaster 3?

[Held]

Hi! Please tell me, is there a random LFO in Synthmaster 3?

It's called Noise LFO in SynthMaster

[Hyperbole]

I have owned Synthmaster since version 2 but decided to wait to dig in until version 3 was available. Now that I have version 3 for some time here are my thoughts.

Criticisms regarding the UI are perhaps a bit overblown. Compared to Avenger, which has a similar tabbed interface, Synthmaster is much more comfortable to use. I can’t even use Avenger on my 14” MacBook Pro. The Avenger UI is so cluttered and cramped and the controls are so tiny I can barely use it on my 27” 5K monitor.

The problem with both Avenger and Synthmaster is the sound just isn’t there. All the presets have a brittle, plastic sound to them. I realize sound quality is subjective, but I would WAY rather use Zebra, Omnisphere, Dune, or even Spire.

I don’t know if this is a function of the amount of processing power allocated to Synthmaster or simply the quality of the algorithms/models, but the sound needs more heft and warmth.

Just my opinion. You are of course free to disagree.

[whassup]

I don’t know if this is a function of the amount of processing power allocated to Synthmaster or simply the quality of the algorithms/models, but the sound needs more heft and warmth.

Just my opinion. You are of course free to disagree.

Yeah, this is so subjective. For the plasticky thing I sold Phase Plant.
I just ugraded to SM3 because of the sound. SM3 does things that I don't hear from my beloved U-He synths. Not better, just good and different. Plus tons of great presets.

BTW, are you aware of (when having SM3 opened) ->Settings/Audio Engine/Engine quality? For some reason it always defaults to draft here.

[mixyguy2]

So, with it's release, is SynthMaster 3 the new reigning Super Synth?

Since there's no such thing, no. (That said, I have v2.9 and like it well enough.)

[swilow11]

Curious if the bugs have been ironed out of SM3? I started using it when released last year but had a bunch of crashes so thought I'd hold off on diving in until they were remedied. Keen to get back into it though, hopefully it's a bit more stable...

[kv331]

Curious if the bugs have been ironed out of SM3? I started using it when released last year but had a bunch of crashes so thought I'd hold off on diving in until they were remedied. Keen to get back into it though, hopefully it's a bit more stable...

Bug fixes since v3.0.1 release (I counted 113 fixes, v3.2 is not released yet)

3.2.0 (Revision 16008)
1. FIX: SynthMaster 3 might crash when initializing a preset that had parameters midi learned previously
2. FIX: SynthMaster 3 crashes when more than 8 simultaneous regions play on a multisample
3. FIX: SynthMaster 3 doesn't recognize 'key' token in sfz files
4. FIX: SynthMaster 3 crashes when user selects a sample/multisample from the waveform browser window, and then double clicks on the osc waveform view
5. FIX: SynthMaster 3 skin fonts are not installed correctly on MacOS

v3.1.3 (Revision 15962)
6. FIX: SynthMaster 3 crashes when a layer modulation source is dragged and dropped on to a global effect parameter
7. FIX: SynthMaster 3 might crash when a new preset is loaded while the old preset had modulations that don't exist in the new one
8. FIX: Swapping effects might not work correctly
9. FIX: Replacing granular oscillator with vanalog oscillator crashes SynthMaster 3
10. FIX: Resetting a wavetable oscillator after editing wavetable properties might crash SynthMaster 3
11. FIX: Preset names longer that 63 characthers causes SynthMaster 3 to crash

v3.1.2 (Revision 15937)
12. FIX: General Midi Drum Kit is missing in demo version of SynthMaster 3
13. FIX: When the plug-in window is closed while a popup window is displaying, SynthMaster 3 crashes
14. FIX: Changing sampling rate might crash granular oscillator
15. FIX: SynthMaster 3 might crash while switching presets with drum sequences
16. FIX: SynthMaster 3 might crash when waveform browser dialog is open and user switches to another layer
17. FIX: Waveform browser dialog doesn't locate single samples correctly
18. FIX: When moving modules using the routing view, modules should stay inside the routing view
19. FIX: Notes don't terminate when adsr envelope vintage amount is increased
20.FIX: Sample oscillators don't work correctly when layer voicing mode is set to Analog
21.FIX: Factory waveforms & samples of SynthMaster 2 are shown under Expansions category

v3.1.1 (Revision 15892)
22. FIX: SynthMaster 3 might crash when scanning wave files with invalid headers
23. FIX: Drum sequences are not displayed as sorted
24. FIX: SynthMaster 3 doesn't load sfz files with round robin / random regions correctly
25. FIX: SynthMaster 3 might crash when reading older archive files (SynthMaster 2 expansions)
26.FIX: Favourite/hidden attributes for online presets are not saved
27.FIX: Online presets for SynthMaster One/SynthMaster 2 are not displayed on the preset browser
28.FIX: Oscillator view doesn't allow creating a new multi-sample before loading one first
29.FIX: When user saves a preset, favourites/hidden attributes of presets are reset

v3.1.0 (Revision 15867)
30. FIX: Deleting the last keyframe of a line source and then inserting a keyframe at the end crashes SynthMaster 3
31. FIX: Deleting a keyframe might crash SynthMaster 3
32. FIX: Rearranging modules in routing view might crash SynthMaster 3
33. FIX: Loading a preset into a layer might delete mod matrix entries for other layers
34. FIX: Step LFO doesn't move to the next step when trigger type is set to Global
35. FIX: SynthMaster 3 might crash when a popup window is open and a new preset is loaded

v3.0.9 (Revision 15838)
36. FIX: Initializing a preset might generate clicks
37. FIX: Wavetable oscillator view might crash SynthMaster 3
38. FIX: Sample keytrack is not loaded correctly on the sample editor dialog
39.FIX: Sfz region's loop mode should be set from the corresponding sample file if the loop mode is not defined in the sfz text
40.FIX: Quick sort algorithm on large number of items might cause crashes due to stack overflow errors
41.FIX: Move before module menu is not working
42.FIX: Move after module menu is not working
43.FIX: Granular oscillator might crash SynthMaster 3 when layer voice allocation is static or layer poly mode is mono
44.FIX: Vector oscillator x/y axis values are not loaded correctly from SynthMaster 2 presets
45.FIX: When a dialog is moved, views behind it stay invisible
46.FIX: Distortion effect is not initialized correctly causing clicks upon initialization
47.FIX: After a preset is loaded, midi listener controls such as pitch bend slider / mod wheel slider / piano view stop responding to midi messages
48.FIX: Preset author is not read correctly from SynthMaster One presets
49.FIX: Deleting keyframe for a spectral filter wavetable effect might crash SynthMaster 3
50.FIX: Loading a nks preset inside Komplete Kontrol / Maschine crashes SynthMaster 3
51.FIX: Loading a SynthMaster 3 preset with multiple layers into a layer doesn't work correctly and might crash SynthMaster 3
52.FIX: Clicking on random wavetable button on the wavetable oscillator display crashes SynthMaster 3
53.FIX: Closing a dialog when a text edit is in place crashes SynthMaster 3
54.FIX: SynthMaster 3 crashes when loading a preset bank with an older version

v3.0.8 (Revision 15775)
waveforms/samples/wavetables
55. FIX: ADSR envelopes are not rendered correctly
56. FIX: When refreshing license key file, a new license for SynthMaster 2 should be created if it is missing
57. FIX: Creating random waveform crashes SynthMaster 3
58. FIX: When user restores SynthMaster One factory presets, SynthMaster One presets can not be loaded until the next restart
59. FIX: When user restores SynthMaster 2 factory presets, SynthMaster 2 presets can not be loaded until the next restart
60.FIX: Fine tune display/parameter range should be between -50/+50 cents
61.FIX: Arpeggiator might cause hanging hotes in Chord mode
62.FIX: Arpeggiator doesn't play notes after the first one correctly in Chord mode
63.FIX: If user edits ADSR envelope attack/decay/release times by typing, the value resets to the minimum after editing
64.FIX: When number of steps is increased for a drum sequence, all new notes should be cleared
65.FIX: When loading a preset for a layer effect rack, the fx output in the routing view disconnects from its input(s)

v3.0.7 (Revision 15731)
66. FIX: SynthMaster 3 crashes when a modulation source button is dragged on another modulation source button

v3.0.6 (Revision 15686)
67. FIX: When a popup window is open, all controls behind it should be invisible

v3.0.5 (Revision 15659)
68. FIX: When user changes waveform of a vector/additive oscillator while a note is playing, the new waveform is not loaded
69. FIX: Increasing unison detune spread parameter of a layer shifts the center pitch of that layer when layer has more than one unison voices

v3.0.4 (Revision 15621)
70. FIX: When a wav/aif/flac file is imported twice, SynthMaster 3 crashes
71. FIX: Wav/aif/flac files with lengths shorter than 4096 samples should be imported as single cycle waveforms
72. FIX: SynthMaster 3 Standalone is not added to Windows start menu (Windows)
73. FIX: When sampling rate changes, granular osc might crash
74. FIX: Loading SynthMaster 2 presets into new layers doesn't work and ends up with a warning message
75. FIX: Left/Right arrows don't work correctly for Sample view control
76. FIX: SynthMaster One factory presets are listed twice if user installs SynthMaster One after SynthMaster 3
77. FIX: Delay effect's left/right delay length parameters are not modulateable
78. FIX: Switching from bipolar to unipolar waveshaper curve doesn't work correctly and might crash SynthMaster 3
79. FIX: Closing the wavetable editor window when the number of frames textbox has focus might crash SynthMaster 3
80. FIX: SFZ files might not load correctly when the sfz definition contains comments
81. FIX: SynthMaster 3 should read loop points from wav/aif/flac files when the sfz definition has regions with looping enabled but their loop points are missing
82. FIX: SynthMaster 3 doesn't read end of FLAC files correctly
83. FIX: SynthMaster 3 crashes when reading a WAV file with metadata text longer than 256 characters
84. FIX: SynthMaster 3 might crash when reading file extensions of files with no extensions
85. FIX: SynthMaster 3 might crash when SFZ definition contains embedded sample data
86. FIX: SynthMaster 3 VST3 doesn't display the name of the loaded preset correctly after reopening editor window
87. FIX: When a wavetable file is dropped on to the wavetable waveform view, the wavetable is not loaded
88. FIX: Made it easier to drag-n-drop module input/output ports and create connections between them inside the routing view

v3.0.3 (Revision 15544)
89. FIX: SynthMaster 3 crashes when FLAC files are dragged and dropped on to sample/waveform views
90. FIX: When a random preset is loaded, the selected preset in presets list is not updated
91. FIX: Waveform and Sample databases are rebuilt whenever revision number increases causing a delay during initialization
92. FIX: SynthMaster 3 throws Missing Waveform errors for some SynthMaster 2 presets when SynthMaster 2 is not installed on user machine
93. FIX: SynthMaster 3 might hang Cubase DAW when running for the first time
94. FIX: SynthMaster 3 doesn't display the name of the loaded preset correctly, instead displays "New Preset" (Issue #96191)
95. FIX: Global A4 tuning parameter is not in the correct range (should be between 420-460 Hz, but was in between 430-450 Hz)
96. FIX: Editing the distortion curve generates extremely loud clicks (Issue #96259)
97. FIX: When loading SynthMaster One presets, layer bypass/solo parameters are not reset (Issue #96233)
98. FIX: SynthMaster 3 crashes when switching from Granular to Wavetable oscillator
99. FIX: Left/Right arrows and mouse scroll wheel doesn't work correctly for Sample view control
100. FIX: Quick sort algorithm on waveforms and samples might cause crashes due to stack overflow errors
101. FIX: SynthMaster 3 might crash after downloading expansion banks from synthmaster.com web site
102. FIX: SynthMaster 3 might crash when selecting single cycle waveforms inside wavetable editor
103. FIX: SynthMaster 3 might crash when a preset that's created after editing a SynthMaster One / 2 preset is loaded
104. FIX: SynthMaster 3 might hang when reading WAV files
105. FIX: When browsing through presets, SynthMaster 3 gets stuck when two subsequent presets have the same name
106. FIX: SynthMaster 3 crashes when a preset is loaded from a different thread
107. FIX: Clicking on "Random Sample" menu for the sample dropdown crashes SynthMaster 3
108. FIX: SynthMaster 3 VST3 doesn't pass inputs 3 and above to its output
109. FIX: SynthMaster 2 user samples folder is not added to SynthMaster 3 samples search paths
110. FIX: SynthMaster 2 user waveforms folder is not added to SynthMaster 3 waveforms search paths
111. FIX: SynthMaster One user waveforms folder is not added to SynthMaster 3 waveforms search paths
112. FIX: SynthMaster 2 presets that use waveforms from wavetables don't load correctly
113 .FIX: Global pitch bend range parameter is not loaded correctly

[kv331]

BTW, are you aware of (when having SM3 opened) ->Settings/Audio Engine/Engine quality? For some reason it always defaults to draft here.

Are you setting global quality (realtime/offline) or preset quality? Works for me just tested:

Screenshot 2025-04-06 at 10.16.33.png

[whassup]

BTW, are you aware of (when having SM3 opened) ->Settings/Audio Engine/Engine quality? For some reason it always defaults to draft here.

Are you setting global quality (realtime/offline) or preset quality? Works for me just tested:


Screenshot 2025-04-06 at 10.16.33.png

Yes, Global and Offline keep my setting of Best. Thank you.
What is that preset setting? It falls back to Draft when I change it to best and reload the plugin.

[ThomasHelzle]

It's not just some honeymoon thing here.
SM3 continues to be my favourite synth for sound and usage.
Great presets, great sound, great features, great interface now there is a sample/wavetable browser, great support, great price, great copy-protection.

I never use Avenger since I do not gel with GUI, dev, sound, sold Falcon for thin and somehow boring sound, absurd loading times and strange limitations, have Pigements but find the sound dead, tried Serum, found it too clean, have or tried a ton of other synths...

SM3 sounds somehow real to me, call it analogue or good or whatever, my ears just like pretty much every sound it makes and I always get what I look for fast or find unexpected things that are even better.
I can't explain it but it would be my island-synth of choice.
Together with some physical modelling instruments...

Cheers,

Tom

[swilow11]

Curious if the bugs have been ironed out of SM3? I started using it when released last year but had a bunch of crashes so thought I'd hold off on diving in until they were remedied. Keen to get back into it though, hopefully it's a bit more stable...

Bug fixes since v3.0.1 release (I counted 113 fixes, v3.2 is not released yet)

3.2.0 (Revision 16008)
1. FIX: SynthMaster 3 might crash when initializing a preset that had parameters midi learned previously
2. FIX: SynthMaster 3 crashes when more than 8 simultaneous regions play on a multisample
3. FIX: SynthMaster 3 doesn't recognize 'key' token in sfz files
4. FIX: SynthMaster 3 crashes when user selects a sample/multisample from the waveform browser window, and then double clicks on the osc waveform view
5. FIX: SynthMaster 3 skin fonts are not installed correctly on MacOS

v3.1.3 (Revision 15962)
6. FIX: SynthMaster 3 crashes when a layer modulation source is dragged and dropped on to a global effect parameter
7. FIX: SynthMaster 3 might crash when a new preset is loaded while the old preset had modulations that don't exist in the new one
8. FIX: Swapping effects might not work correctly
9. FIX: Replacing granular oscillator with vanalog oscillator crashes SynthMaster 3
10. FIX: Resetting a wavetable oscillator after editing wavetable properties might crash SynthMaster 3
11. FIX: Preset names longer that 63 characthers causes SynthMaster 3 to crash

v3.1.2 (Revision 15937)
12. FIX: General Midi Drum Kit is missing in demo version of SynthMaster 3
13. FIX: When the plug-in window is closed while a popup window is displaying, SynthMaster 3 crashes
14. FIX: Changing sampling rate might crash granular oscillator
15. FIX: SynthMaster 3 might crash while switching presets with drum sequences
16. FIX: SynthMaster 3 might crash when waveform browser dialog is open and user switches to another layer
17. FIX: Waveform browser dialog doesn't locate single samples correctly
18. FIX: When moving modules using the routing view, modules should stay inside the routing view
19. FIX: Notes don't terminate when adsr envelope vintage amount is increased
20.FIX: Sample oscillators don't work correctly when layer voicing mode is set to Analog
21.FIX: Factory waveforms & samples of SynthMaster 2 are shown under Expansions category

v3.1.1 (Revision 15892)
22. FIX: SynthMaster 3 might crash when scanning wave files with invalid headers
23. FIX: Drum sequences are not displayed as sorted
24. FIX: SynthMaster 3 doesn't load sfz files with round robin / random regions correctly
25. FIX: SynthMaster 3 might crash when reading older archive files (SynthMaster 2 expansions)
26.FIX: Favourite/hidden attributes for online presets are not saved
27.FIX: Online presets for SynthMaster One/SynthMaster 2 are not displayed on the preset browser
28.FIX: Oscillator view doesn't allow creating a new multi-sample before loading one first
29.FIX: When user saves a preset, favourites/hidden attributes of presets are reset

v3.1.0 (Revision 15867)
30. FIX: Deleting the last keyframe of a line source and then inserting a keyframe at the end crashes SynthMaster 3
31. FIX: Deleting a keyframe might crash SynthMaster 3
32. FIX: Rearranging modules in routing view might crash SynthMaster 3
33. FIX: Loading a preset into a layer might delete mod matrix entries for other layers
34. FIX: Step LFO doesn't move to the next step when trigger type is set to Global
35. FIX: SynthMaster 3 might crash when a popup window is open and a new preset is loaded

v3.0.9 (Revision 15838)
36. FIX: Initializing a preset might generate clicks
37. FIX: Wavetable oscillator view might crash SynthMaster 3
38. FIX: Sample keytrack is not loaded correctly on the sample editor dialog
39.FIX: Sfz region's loop mode should be set from the corresponding sample file if the loop mode is not defined in the sfz text
40.FIX: Quick sort algorithm on large number of items might cause crashes due to stack overflow errors
41.FIX: Move before module menu is not working
42.FIX: Move after module menu is not working
43.FIX: Granular oscillator might crash SynthMaster 3 when layer voice allocation is static or layer poly mode is mono
44.FIX: Vector oscillator x/y axis values are not loaded correctly from SynthMaster 2 presets
45.FIX: When a dialog is moved, views behind it stay invisible
46.FIX: Distortion effect is not initialized correctly causing clicks upon initialization
47.FIX: After a preset is loaded, midi listener controls such as pitch bend slider / mod wheel slider / piano view stop responding to midi messages
48.FIX: Preset author is not read correctly from SynthMaster One presets
49.FIX: Deleting keyframe for a spectral filter wavetable effect might crash SynthMaster 3
50.FIX: Loading a nks preset inside Komplete Kontrol / Maschine crashes SynthMaster 3
51.FIX: Loading a SynthMaster 3 preset with multiple layers into a layer doesn't work correctly and might crash SynthMaster 3
52.FIX: Clicking on random wavetable button on the wavetable oscillator display crashes SynthMaster 3
53.FIX: Closing a dialog when a text edit is in place crashes SynthMaster 3
54.FIX: SynthMaster 3 crashes when loading a preset bank with an older version

v3.0.8 (Revision 15775)
waveforms/samples/wavetables
55. FIX: ADSR envelopes are not rendered correctly
56. FIX: When refreshing license key file, a new license for SynthMaster 2 should be created if it is missing
57. FIX: Creating random waveform crashes SynthMaster 3
58. FIX: When user restores SynthMaster One factory presets, SynthMaster One presets can not be loaded until the next restart
59. FIX: When user restores SynthMaster 2 factory presets, SynthMaster 2 presets can not be loaded until the next restart
60.FIX: Fine tune display/parameter range should be between -50/+50 cents
61.FIX: Arpeggiator might cause hanging hotes in Chord mode
62.FIX: Arpeggiator doesn't play notes after the first one correctly in Chord mode
63.FIX: If user edits ADSR envelope attack/decay/release times by typing, the value resets to the minimum after editing
64.FIX: When number of steps is increased for a drum sequence, all new notes should be cleared
65.FIX: When loading a preset for a layer effect rack, the fx output in the routing view disconnects from its input(s)

v3.0.7 (Revision 15731)
66. FIX: SynthMaster 3 crashes when a modulation source button is dragged on another modulation source button

v3.0.6 (Revision 15686)
67. FIX: When a popup window is open, all controls behind it should be invisible

v3.0.5 (Revision 15659)
68. FIX: When user changes waveform of a vector/additive oscillator while a note is playing, the new waveform is not loaded
69. FIX: Increasing unison detune spread parameter of a layer shifts the center pitch of that layer when layer has more than one unison voices

v3.0.4 (Revision 15621)
70. FIX: When a wav/aif/flac file is imported twice, SynthMaster 3 crashes
71. FIX: Wav/aif/flac files with lengths shorter than 4096 samples should be imported as single cycle waveforms
72. FIX: SynthMaster 3 Standalone is not added to Windows start menu (Windows)
73. FIX: When sampling rate changes, granular osc might crash
74. FIX: Loading SynthMaster 2 presets into new layers doesn't work and ends up with a warning message
75. FIX: Left/Right arrows don't work correctly for Sample view control
76. FIX: SynthMaster One factory presets are listed twice if user installs SynthMaster One after SynthMaster 3
77. FIX: Delay effect's left/right delay length parameters are not modulateable
78. FIX: Switching from bipolar to unipolar waveshaper curve doesn't work correctly and might crash SynthMaster 3
79. FIX: Closing the wavetable editor window when the number of frames textbox has focus might crash SynthMaster 3
80. FIX: SFZ files might not load correctly when the sfz definition contains comments
81. FIX: SynthMaster 3 should read loop points from wav/aif/flac files when the sfz definition has regions with looping enabled but their loop points are missing
82. FIX: SynthMaster 3 doesn't read end of FLAC files correctly
83. FIX: SynthMaster 3 crashes when reading a WAV file with metadata text longer than 256 characters
84. FIX: SynthMaster 3 might crash when reading file extensions of files with no extensions
85. FIX: SynthMaster 3 might crash when SFZ definition contains embedded sample data
86. FIX: SynthMaster 3 VST3 doesn't display the name of the loaded preset correctly after reopening editor window
87. FIX: When a wavetable file is dropped on to the wavetable waveform view, the wavetable is not loaded
88. FIX: Made it easier to drag-n-drop module input/output ports and create connections between them inside the routing view

v3.0.3 (Revision 15544)
89. FIX: SynthMaster 3 crashes when FLAC files are dragged and dropped on to sample/waveform views
90. FIX: When a random preset is loaded, the selected preset in presets list is not updated
91. FIX: Waveform and Sample databases are rebuilt whenever revision number increases causing a delay during initialization
92. FIX: SynthMaster 3 throws Missing Waveform errors for some SynthMaster 2 presets when SynthMaster 2 is not installed on user machine
93. FIX: SynthMaster 3 might hang Cubase DAW when running for the first time
94. FIX: SynthMaster 3 doesn't display the name of the loaded preset correctly, instead displays "New Preset" (Issue #96191)
95. FIX: Global A4 tuning parameter is not in the correct range (should be between 420-460 Hz, but was in between 430-450 Hz)
96. FIX: Editing the distortion curve generates extremely loud clicks (Issue #96259)
97. FIX: When loading SynthMaster One presets, layer bypass/solo parameters are not reset (Issue #96233)
98. FIX: SynthMaster 3 crashes when switching from Granular to Wavetable oscillator
99. FIX: Left/Right arrows and mouse scroll wheel doesn't work correctly for Sample view control
100. FIX: Quick sort algorithm on waveforms and samples might cause crashes due to stack overflow errors
101. FIX: SynthMaster 3 might crash after downloading expansion banks from synthmaster.com web site
102. FIX: SynthMaster 3 might crash when selecting single cycle waveforms inside wavetable editor
103. FIX: SynthMaster 3 might crash when a preset that's created after editing a SynthMaster One / 2 preset is loaded
104. FIX: SynthMaster 3 might hang when reading WAV files
105. FIX: When browsing through presets, SynthMaster 3 gets stuck when two subsequent presets have the same name
106. FIX: SynthMaster 3 crashes when a preset is loaded from a different thread
107. FIX: Clicking on "Random Sample" menu for the sample dropdown crashes SynthMaster 3
108. FIX: SynthMaster 3 VST3 doesn't pass inputs 3 and above to its output
109. FIX: SynthMaster 2 user samples folder is not added to SynthMaster 3 samples search paths
110. FIX: SynthMaster 2 user waveforms folder is not added to SynthMaster 3 waveforms search paths
111. FIX: SynthMaster One user waveforms folder is not added to SynthMaster 3 waveforms search paths
112. FIX: SynthMaster 2 presets that use waveforms from wavetables don't load correctly
113 .FIX: Global pitch bend range parameter is not loaded correctly

That's a lot of bug fixing which makes my hesitancy seem quite valid. The synth didn't seem ready for release to me. But it seems like you and your team have sorted most of the issues out now. I will have to check SM3 out again soon I think.

[audiojunkie]

There is no team. There is only kv331 and his brother. They've been working their butts off to make this a nice release.