KVR Audio

Uncle E · Post by **Uncle E** » Fri Dec 13, 2024 8:42 pm

xhunaudio wrote: ↑Fri Dec 13, 2024 11:43 am Hi Eric, for "new beta soon"you mean Nodal Red or the one after Nodal Red?

The one after.

xhunaudio · Post by **xhunaudio** » Sat Dec 14, 2024 2:33 am

I was taking a look to Xenia, but it seems it's not able to load the MW XT firmware from Waldorf legacy support archive (.mid format).

So, I downloaded the (.bin format) firmware from the "eprom synth" reference website(the first result in a Google search) and Xenia can't load that too.

Also : does anyone found anything strange with the "Microwave_XT" zip archive from there ?

Instead, Nodal Red is ok with the (.bin) firmware from the "eprom synth", but presets are not included in the firmware (or Nodal Red can't load that presets).

SLiC · Post by **SLiC** » Sat Dec 14, 2024 2:40 am

xhunaudio wrote: ↑Sat Dec 14, 2024 2:33 am I was taking a look to Xenia, but it seems it's not able to load the MW XT firmware from Waldorf legacy support archive (.mid format).

So, I downloaded the (.bin format) firmware from the "eprom synth" reference website(the first result in a Google search) and Xenia can't load that too.

Also : does anyone found anything strange with the "Microwave_XT" zip archive from there ?

Instead, Nodal Red is ok with the (.bin) firmware from the "eprom synth", but presets are not included in the firmware (or Nodal Red can't load that presets).

From memory you need 2 x .bin files for the XT, lower and upper.
Pre-sets are a separate download

xhunaudio · Post by **xhunaudio** » Sat Dec 14, 2024 2:44 am

Yes, XT firmware archive from "eprom synth" contains 2 .bin files (not recognized by Xenia as a valid firmware) and 2 strange .jpg image files of about 4 and 8 MB completely out of context...

sprnva · Post by **sprnva** » Sat Dec 14, 2024 2:58 am

It's been a while since I looked at NodalRed2x but at the time I couldn't find the factory presets on the Clavia site. I had to go digging through The Wayback Machine to find them. Here they are to save anyone else having to go digging for them.

SLiC · Post by **SLiC** » Sat Dec 14, 2024 3:31 am

xhunaudio wrote: ↑Sat Dec 14, 2024 2:44 am Yes, XT firmware archive from "eprom synth" contains 2 .bin files (not recognized by Xenia as a valid firmware) and 2 strange .jpg image files of about 4 and 8 MB completely out of context...

The ones that work for me are called lower_Am29F010.bin and upper_Am29F010.bin if that helps.

xhunaudio · Post by **xhunaudio** » Sat Dec 14, 2024 3:54 am

Thank you sprnva, presets are now loaded correctly in Nodal Red.

Thank you SLiC - about Xenia, the "Microwave II" roms work flawlessy and all presets are loaded correctly.

The previous Xenia "problem" was with the "Microwave_XT.zip" firmware roms from the "synth eprom" archive : there's definitely something strange with that archive and the 2 included, out of context pictures uploaded by "Anteelope" - NOT in line with the usual professionalism of that "synth eprom" website.

Before the proper "Microwave II" roms, I directly tried to download that non-working "Microwave XT" firmware because I know Xenia emulates the Waldorf "Microwave XT" device.

Freakadelle1 · Post by **Freakadelle1** » Sun Dec 22, 2024 3:20 pm

Hey ppl!

Does anyone has also the problem that Osirus /OsTIrus does not recognice any input from midi keyboards?

Scotty · Post by **Scotty** » Sun Dec 22, 2024 6:06 pm

Not here. I am using the latest builds as listed on the Discord. Running on Windows 10 latest updates installed triggering through Cubase 14.05. No issues here.

Freakadelle1 wrote: ↑Sun Dec 22, 2024 3:20 pm Hey ppl!

Does anyone has also the problem that Osirus /OsTIrus does not recognice any input from midi keyboards?

kmonkey · Post by **kmonkey** » Sun Dec 22, 2024 11:53 pm

Freakadelle1 wrote: ↑Sun Dec 22, 2024 3:20 pm Hey ppl!

Does anyone has also the problem that Osirus /OsTIrus does not recognice any input from midi keyboards?

Nope, al working fine. Check your keyboard MIDI channel output.

Freakadelle1 · Post by **Freakadelle1** » Mon Dec 23, 2024 8:42 am

kmonkey wrote: ↑Sun Dec 22, 2024 11:53 pm Nope, al working fine. Check your keyboard MIDI channel output.

Where do i have to check it? I've also noticed that Osirus / OsTIrus (unlike Xenia / Varva) does not have any midi input output options in their context menu (Xenia / Varva does). Every other synth works fine, even Xenia and Varva, but not the Osirus / OsTIrus.

I am using they as AU Plugins in Logic Audio btw..

aMUSEd · Post by **aMUSEd** » Mon Dec 23, 2024 11:46 am

I can't seem to find the eproms for the Nord lead 2x, only the Nord Lead 2 (is that the same?)

aMUSEd · Post by **aMUSEd** » Tue Dec 24, 2024 10:59 am

How long after donating does it take to get a link to the files?

SLiC · Post by **SLiC** » Tue Dec 24, 2024 11:09 am

aMUSEd wrote: ↑Mon Dec 23, 2024 11:46 am I can't seem to find the eproms for the Nord lead 2x, only the Nord Lead 2 (is that the same?)

See my answer a few post up- I posted the file names of the ones that work.

Uncle E · Post by **Uncle E** » Tue Dec 24, 2024 11:25 am

aMUSEd wrote: ↑Tue Dec 24, 2024 10:59 am How long after donating does it take to get a link to the files?

Did you announce that you donated on the Discord? If not, go here:

https://discord.com/channels/8290993479 ... 7246693427

Since Nodal was recently released, there are currently no alpha versions available to donators. The FAQ shows the progress of the next releases:

https://dsp56300.wordpress.com/faqs/

DSP563xx Emulator (Access Virus, Nord Lead, Waldorf MW...)