^^ They are pretty easy and cool, tho I don’t use it a lot for some reason. I like the matrix
mode.
Assigning notes can be a little tedious…
never got into the cv out much either.
2025: A Year in Gear (What You've Bought or Want to Buy in 2025)
-
WatchTheGuitar WatchTheGuitar https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=440193 - KVRAF
- 13256 posts since 30 Apr, 2019
I just figured it’s not that much more expensive than a Bloom v2, much more powerful - lots of different sequencer modes - and takes up zero hp. All wins in my book.
The manual says it offers step sequencing and can be recorded from a controller keyboard so will probably use that mode a lot.
The manual says it offers step sequencing and can be recorded from a controller keyboard so will probably use that mode a lot.
-
WatchTheGuitar WatchTheGuitar https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=440193
- KVRAF
- 13256 posts since 30 Apr, 2019
Unfortunately turns out I’m not getting it now (despite paying for it) as the seller is on holiday for 2 weeks. Oh well, will keep an eye out for a similarly priced one.
-
WatchTheGuitar WatchTheGuitar https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=440193
- KVRAF
- 13256 posts since 30 Apr, 2019
My shitty vision would probably necessitate the white pad ones tbh.
-
- KVRian
- 991 posts since 24 May, 2024
I apologize if I already posted this. But earlier this year I got some $119 USD headphones for about $20 USD:
Audio-Technica ATH-M30 from eBay.
They have good imaging and aren't too harsh in the mids and highs. The bass is modest, but okay. They have become helpful for my mixing, although they aren't quite for mastering or whatnot--you need some kind of actual open air speakers. But I am really happy with these. If you find any for cheap, they aren't bad, and they sound much better to my ears than the M20s.
Audio-Technica ATH-M30 from eBay.
They have good imaging and aren't too harsh in the mids and highs. The bass is modest, but okay. They have become helpful for my mixing, although they aren't quite for mastering or whatnot--you need some kind of actual open air speakers. But I am really happy with these. If you find any for cheap, they aren't bad, and they sound much better to my ears than the M20s.
-
WatchTheGuitar WatchTheGuitar https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=440193
- KVRAF
- 13256 posts since 30 Apr, 2019
The refunded sequencer cash was burning a hole in my pocket. Now bought Beads to go in my eurorack FX rack.
Looking at it now it’s a very delay, verb and granular heavy FX unit.
You do not have the required permissions to view the files attached to this post.
-
Constructed Identity Constructed Identity https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=288890 - KVRian
- 1305 posts since 29 Sep, 2012 from Minnesota
I probably won’t be getting anything else this year because I haven’t played with what I put together in my euro rack much yet. I just got back to the US and I want to go on another trip. But the land of modules is deep and I haven’t fathomed its depths.
-
- KVRAF
- 13124 posts since 7 May, 2006 from Southern California
I went to Perfect Circuit today to see if I could get my hands on a MN Jumbler but they were out of stock (no problem, I ordered one from Analog Haven). Instead, something with banana jacks followed me home. I'll post some pictures when I get home.
-
- KVRAF
- 13124 posts since 7 May, 2006 from Southern California
This is a programmer/sequencer panel from Prism Circuits called Hymenium. It's like the Serge paperface programmer with stage address inputs and buttons. You can step through the stages with the up/down inputs or by using the sequencer to trigger individual stages. It also has a sequential switch. It looks simple but it can do pretty complex stuff and it's very playable.
-
- KVRAF
- 13124 posts since 7 May, 2006 from Southern California
A short clip i recorded before bed last night. I freaking love stage addressable sequencers!
One thing I don't demonstrate here, is that if two stages are activated at the same time, they are summed together. This makes it really fun to play the stage select buttons while a sequence is running.
One thing I don't demonstrate here, is that if two stages are activated at the same time, they are summed together. This makes it really fun to play the stage select buttons while a sequence is running.
-
- KVRian
- 991 posts since 24 May, 2024
That sounds fun!
-
- KVRAF
- 11306 posts since 18 Aug, 2007 from NYC
This sounds more organic than what it is. Is that the shift register kicking in for rhythmic shift?justin3am wrote: Wed May 21, 2025 5:05 pm A short clip i recorded before bed last night. I freaking love stage addressable sequencers!
One thing I don't demonstrate here, is that if two stages are activated at the same time, they are summed together. This makes it really fun to play the stage select buttons while a sequence is running.
-
- KVRAF
- 13124 posts since 7 May, 2006 from Southern California
No shift register action in this one but that's sure to be a great source of triggers.
Just two clocks, in sync but out of phase with each other. One advances the trigger sequencer and the other advances the forward/up input on the programmer.
Each step of the trigger sequencer can be connected to any stage of the programmer, so I can step through the stages out of order and even repeat the same stage by connecting two or more trigger outs to the same stage.
Since the other clock is out of phase with the main clock, it effectively doubles the tempo and causes the programmer to move one stage to the right between each step of the trigger sequencer. Since the second clock is a little less than 180° away from the the main clock, there is a little bit of swing.
I have two rows from the programmer connected to the sequential switch, that gives me a 16 step sequence. That sequence is controlling the FM amount between oscillators 1 and 2, and the envelop length. The remaining row controls the oscillator pitch.
With more asynchronous trigger sources, I can get into some really interesting patterns. I can't wait to get it set up with the larger system in my studio!
Just two clocks, in sync but out of phase with each other. One advances the trigger sequencer and the other advances the forward/up input on the programmer.
Each step of the trigger sequencer can be connected to any stage of the programmer, so I can step through the stages out of order and even repeat the same stage by connecting two or more trigger outs to the same stage.
Since the other clock is out of phase with the main clock, it effectively doubles the tempo and causes the programmer to move one stage to the right between each step of the trigger sequencer. Since the second clock is a little less than 180° away from the the main clock, there is a little bit of swing.
I have two rows from the programmer connected to the sequential switch, that gives me a 16 step sequence. That sequence is controlling the FM amount between oscillators 1 and 2, and the envelop length. The remaining row controls the oscillator pitch.
With more asynchronous trigger sources, I can get into some really interesting patterns. I can't wait to get it set up with the larger system in my studio!