KVR Audio

jens · Post by **jens** » Wed Jun 11, 2025 11:57 am

Great!

2ca · Post by **2ca** » Thu Jun 12, 2025 11:22 am

What are your guys opinion on ST/MS (stereo to mid-side) knobs on [STEREO] page.
Currently the +100 value corresponds to fully stereo mode (no channel swap),
0 values corresponds to fully M/S mode,
and -100 value is fully stereo with L/R channels swapped
other values are anything in between

This arrangement might be non-intuitive and confusing.
Another way to do it is to have knob go from 0 to 100 where 0 = fully stereo, 100 - fully M/S
and I add a [+/-] button, where - is swapping mode

Denis,
DEVPROAUDIO,
https://devproaudio.com

Lesha · Post by **Lesha** » Thu Jun 12, 2025 11:34 am

2ca wrote: Thu Jun 12, 2025 11:22 am What are your guys opinion on ST/MS (stereo to mid-side) knobs on [STEREO] page.
Currently the +100 value corresponds to fully stereo mode (no channel swap),
0 values corresponds to fully M/S mode,
and -100 value is fully stereo with L/R channels swapped
other values are anything in between

This arrangement might be non-intuitive and confusing.
Another way to do it is to have knob go from 0 to 100 where 0 = fully stereo, 100 - fully M/S
and I add a [+/-] button, where - is swapping mode

Denis,
DEVPROAUDIO,
https://devproaudio.com

My vote goes for the 2nd option.

jbraner · Post by **jbraner** » Thu Jun 12, 2025 11:46 am

Another way to do it is to have knob go from 0 to 100 where 0 = fully stereo, 100 - fully M/S and I add a [+/-] button, where - is swapping mode

I think this is better too...

2ca · Post by **2ca** » Wed Jun 18, 2025 3:14 pm

new REVERSIDE build.

VERSION 0.9.4.b330 CHANGES
-------------------------------------------------------------------------
- Early Reflection engine re-adjusted and bug-fixed
- Improved Stereo Field controls now offer two modes Blend and Rotate
- Added: input stereo image control (for ER and LR)
that can collpse to mono or isolate Side signal
- Preset Browser: bank/folder/preset rename option added
- ER->LR Send now offers 6 different 6 different pick-up locations from ER processing chain
- Wet/Dry section and ER/LR section on the mix page now have dedicated
[Lock] buttons which lock all related params
- Added: [RESET] button on [SPACE] page that resets all geom position controls to their
default values
- Many other adjustments/fixes in the dsp/algorithm
- ER Pre-delay now works properly in all modes
- Decay Filter on/off button bug fixed
- Frequency displays: X grid misalignment bug fixed
- Various other minor improvements and fixes
- installer now auto-removes Factory preset folders in order
to avoid mixup with previous versions. user created folders/files are retained

If you are interested in betatesting or simply want to try the reverb
feel free to email me at: info@devproaudio.com

I remind that Reverside is free for all 2CAudio and SpinAudio users.

I want to thank all the betatesters who help me to improve the product.

Denis,
DEVPROAUDIO
https://devproaudio.com

jbraner · Post by **jbraner** » Wed Jun 18, 2025 6:29 pm

Hi Denis,
The "save as" functionality is still acting weird in Windows. I saved Room 01 as "JB Room 01" on the second try, but when I try to save Room 02 as "JB Room 02" it fills in the name field as "JB Room 01" - when I click on it - and won't let me change it (also it's not red so I can tell it won't let me edit the name.

The new color schemes are nice - but everything is way too bright and "in your face". Is there a way to tone down the brightness for everything? Just a "contrast" control? Or "brightness" control?

Echoes in the Attic · Post by **Echoes in the Attic** » Wed Jun 18, 2025 9:48 pm

Where is the window scale setting? I adjusted the text file but just curious.

2ca · Post by **2ca** » Thu Jun 19, 2025 10:52 am

1) Color scheme presets are there for a loading test only, the skin itselft is not yet adjusted to them, I'll do that in next build

2) Window Scaling. If you use VST3/CLAP then you can rescale the window by simply dragging the right-bottom corder of the Window. Another way is to click on leftmost (menu) button in the bottom bar and select [UI], then click on [UI Scale] menu button and select a scale

Denis,
DEVPROAUDIO
https://devproaudio.com

2ca · Post by **2ca** » Mon Jun 30, 2025 3:49 pm

REVERSIDE build 0.9.4.b345

0.9.4.b345 (30/JUN/2025) CHANGES
-------------------------------------------------------------------------
- Keyboard input now works in CLAP/Windows
- Preset Browser: improved
- Windows version works now on pre-AVX2 (Sandy/Ivy Bridge CPUs) systems
- Improved filter editors
- All filter parameters and buttons now update correctly
- Improved UI/DSP synchronization
- various internal bug-fixes and improvements

If you are interested in betatesting or simply want to try the reverb
feel free to email me at: info@devproaudio.com

Reverside is free for 2CAudio and SpinAudio users.

Denis,
DEVPROAUDIO
https://devproaudio.com

Funkybot's Evil Twin · Mon Jun 30, 2025 4:29 pm

Is there a screenprint of Riverside anywhere? I've been on a bit of a reverb kick lately but don't have time to beta right now so I've been casually on the sidelines.

2ca · Post by **2ca** » Mon Jun 30, 2025 4:45 pm

screenshots can be found here:

https://devproaudio.com/manual.html

though these are not the most recent

Funkybot's Evil Twin · Mon Jun 30, 2025 4:51 pm

Much appreciated, thanks!

2ca · Post by **2ca** » Tue Jul 01, 2025 9:34 am

I updated the online manual with the latest version screenshots

2ca · Post by **2ca** » Thu Jul 03, 2025 3:49 pm

a new updated manual in pdf can be downloaded by the link:

https://devproaudio.com/pub/reverside_manual.pdf

jbraner · Post by **jbraner** » Thu Jul 03, 2025 4:25 pm

This is what I get

I usually have to turn off all my add blockers, malware blockers etc to get to your site - but it's still not happy.

Does anyone else have problems with the devproaudio website?

Replacing 2Caudio Reverbs