PitchShaper for ShaperBox OUT NOW – Pitchshifting Reimagined

VST, AU, AAX, CLAP, etc. Plugin Virtual Effects Discussion
RELATED
PRODUCTS
PitchShaper ShaperBox

Post

We are pleased to announce PitchShaper, the drawable pitchshifter that unlocks a world of modern melodies and future FX.

PitchShaper is pitchshifting reimagined for the modern producer. At last, you can put pitch in motion with Cableguys’ legendary drawable LFOs and four specially developed algorithms: Complex, Vocals, Drums and Vintage.

Draw silky smooth vocal shifts – or inhuman formant rhythms. Repitch beats without killing the punch. Stamp stepped sequences onto synths with total accuracy. Bend instruments freely. Paint epic risers. And more.

All with punchy, transient-tight shifting that’s free from glitched attacks, sloppy timing and stereo problems.

PitchShaper is out now for €39 / $39. Or get it in the full ShaperBox 3 Bundle – now containing 11 powerful Shapers – on Black Friday Sale now for only €89 / $89. Upgrade pricing is available for owners of other Shapers via their Cableguys account.


Watch our "Introduction to PitchShaper" with Joe Rossitter:



Features

Easy Drawable Curves
Animate Pitch offset and Formant shift over time with Cableguys’ easy LFO drawing tools. Draw curves, steps and ramps to stamp melodies, slides and formant patterns onto anything. It’s easy, fast and fun.

4 Pro Algorithms
PitchShaper features four specialized shifting modes. ‘Complex’ handles any type of sound, from single instruments to full mixes. ‘Vocals’ is optimized for human voice and other monophonic sources. ‘Drums’ preserves transient tone and punch. And ‘Vintage’ is your choice for lo-fi grit and retro experimentation. All algorithms are built for modulation, reacting to even the fastest changes.

Deep Formant Control
Vocals and Drums modes feature a Formant control with its own drawable LFO, envelope follower, and a special Density parameter for expanded sonic options. Radically transform the character, age or size of any voice. And discover a potent new tool for shaping percussion.

Synth-like Glide
Want your pitch changes to flow smoothly from note to note? Just increase the LFO Smooth control – now your stepped patterns are transformed into synth-like swoops and glides.

Multiband Magic
Split the pitching across up to three frequency bands, for precise targeting or wild creativity. Repitch only the bass in a full musical loop. Tune drum punch independently of treble snap. Shift up the tops to blend in hi-fi texture. Combine all three bands for full-spectrum harmony layers and advanced sound design.

Envelope Followers
Make pitch and formant react in real time with the Envelope Follower that tracks your sound’s dynamics. Modify the punch of drum hits. Make self-varying hi-hats. Add organic tape-like warbling and instability to sustained sounds. Twist vocal formants with every word!

Runs in ShaperBox 3
PitchShaper runs in Cableguys’ ShaperBox 3 effects plugin. Use it on its own, or combine it with Reverb, Time, Drive, Noise, Filter, Liquid, Crush, Volume, Pan and Width Shapers for spectacular multilayered effects. Buy PitchShaper on its own – or save 76% and get all 11 Shapers with the ShaperBox 3 Bundle, on sale now for Black Friday.

Pricing
Find out more, buy PitchShaper and try the free demo.

Post

Nice. Sounds like some very nice algorithms in there.
Don't F**K with Mr. Zero.

Post

Sounds extremely useful! Definitely considering one of the bundles.

Post

Very cool!

Post

Great job, this looks very interesting. Looks like an instabuy actually. Will check the bundles.

Post

So if I own Shaperbox 3 already there is an "upgrade to Shaperbox 3" option showing in my account for $19. I'm assuming if I "upgrade" Shaperbox 3 to Shaperbox 3 (again) that will then give me Pitchshifter in SB3? It's confusing because there's an option to purchase Pitchshaper for $39 and then the "upgrade" option for SB3 to SB3 for $19. It isn't explained whether the upgrade will give you Pitchshaper or not, but I guess I'll try it and find out.

Post

seangm wrote: Tue Oct 14, 2025 3:13 pm So if I own Shaperbox 3 already there is an "upgrade to Shaperbox 3" option showing in my account for $19. I'm assuming if I "upgrade" Shaperbox 3 to Shaperbox 3 (again) that will then give me Pitchshifter in SB3? It's confusing because there's an option to purchase Pitchshaper for $39 and then the "upgrade" option for SB3 to SB3 for $19. It isn't explained whether the upgrade will give you Pitchshaper or not, but I guess I'll try it and find out.
That's very good feedback.. we should clarify this in a better way in the account.

If you do the upgrade to ShaperBox 3 options, then all your missing Shapers get added (even if it's just PitchShaper). And yes, the current price for that is €19 / $19.

Post

Jakob / Cableguys wrote: Tue Oct 14, 2025 3:19 pm That's very good feedback.. we should clarify this in a better way in the account.

If you do the upgrade to ShaperBox 3 options, then all your missing Shapers get added (even if it's just PitchShaper). And yes, the current price for that is €19 / $19.
i was confused in the same way ;) thanks for clarifying! that really should have a better wording/explanation.

and congrats on the release of course!
/////

Post

Jakob / Cableguys wrote: Tue Oct 14, 2025 3:19 pm
seangm wrote: Tue Oct 14, 2025 3:13 pm So if I own Shaperbox 3 already there is an "upgrade to Shaperbox 3" option showing in my account for $19. I'm assuming if I "upgrade" Shaperbox 3 to Shaperbox 3 (again) that will then give me Pitchshifter in SB3? It's confusing because there's an option to purchase Pitchshaper for $39 and then the "upgrade" option for SB3 to SB3 for $19. It isn't explained whether the upgrade will give you Pitchshaper or not, but I guess I'll try it and find out.
That's very good feedback.. we should clarify this in a better way in the account.

If you do the upgrade to ShaperBox 3 options, then all your missing Shapers get added (even if it's just PitchShaper). And yes, the current price for that is €19 / $19.
Thanks. I just purchased the upgrade and installed v3.6. But the Pitchshaper module is showing as "Demo" after installation. Is there something else I need to do to authorize the Pitchshaper module after purchasing/installing SB v3.6 to get it out of demo mode?

Post

Made even better because there was a coupon in my account that I either didn't know about or forgot, so check that before you update. I got my cost down to $9.
rsp
sound sculptist

Post

seangm wrote: Tue Oct 14, 2025 3:28 pm ...

Thanks. I just purchased the upgrade and installed v3.6. But the Pitchshaper module is showing as "Demo" after installation. Is there something else I need to do to authorize the Pitchshaper module after purchasing/installing SB v3.6 to get it out of demo mode?
Yes, redownload your license file and shaperbox will give you the option to import license and do so. (my import license option was at an obvious place, the top bar, but I completely missed it and tried to find it elsewhere for about 1 or so minute :)
rsp
sound sculptist

Post

seangm wrote: Tue Oct 14, 2025 3:28 pm
Jakob / Cableguys wrote: Tue Oct 14, 2025 3:19 pm
seangm wrote: Tue Oct 14, 2025 3:13 pm So if I own Shaperbox 3 already there is an "upgrade to Shaperbox 3" option showing in my account for $19. I'm assuming if I "upgrade" Shaperbox 3 to Shaperbox 3 (again) that will then give me Pitchshifter in SB3? It's confusing because there's an option to purchase Pitchshaper for $39 and then the "upgrade" option for SB3 to SB3 for $19. It isn't explained whether the upgrade will give you Pitchshaper or not, but I guess I'll try it and find out.
That's very good feedback.. we should clarify this in a better way in the account.

If you do the upgrade to ShaperBox 3 options, then all your missing Shapers get added (even if it's just PitchShaper). And yes, the current price for that is €19 / $19.
Thanks. I just purchased the upgrade and installed v3.6. But the Pitchshaper module is showing as "Demo" after installation. Is there something else I need to do to authorize the Pitchshaper module after purchasing/installing SB v3.6 to get it out of demo mode?
Yes download the licence file from your account and add it.

Post

del

Post

Rickskii wrote: Tue Oct 14, 2025 3:39 pm
seangm wrote: Tue Oct 14, 2025 3:28 pm
Jakob / Cableguys wrote: Tue Oct 14, 2025 3:19 pm
seangm wrote: Tue Oct 14, 2025 3:13 pm So if I own Shaperbox 3 already there is an "upgrade to Shaperbox 3" option showing in my account for $19. I'm assuming if I "upgrade" Shaperbox 3 to Shaperbox 3 (again) that will then give me Pitchshifter in SB3? It's confusing because there's an option to purchase Pitchshaper for $39 and then the "upgrade" option for SB3 to SB3 for $19. It isn't explained whether the upgrade will give you Pitchshaper or not, but I guess I'll try it and find out.
That's very good feedback.. we should clarify this in a better way in the account.

If you do the upgrade to ShaperBox 3 options, then all your missing Shapers get added (even if it's just PitchShaper). And yes, the current price for that is €19 / $19.
Thanks. I just purchased the upgrade and installed v3.6. But the Pitchshaper module is showing as "Demo" after installation. Is there something else I need to do to authorize the Pitchshaper module after purchasing/installing SB v3.6 to get it out of demo mode?
Yes download the licence file from your account and add it.
Thanks. I re-downloaded the license file and stuck it in the same location as the old one but it's still showing "Demo". It didn't ask me for the new license file. Maybe I have to delete the old one first and it will prompt me? I'll try that.

Edit: Yeah that worked, thanks for the help.

Post

seangm wrote: Tue Oct 14, 2025 3:43 pm Thanks. I re-downloaded the license file and stuck it in the same location as the old one but it's still showing "Demo". It didn't ask me for the new license file.
There's an option at the end of the Main Menu in ShaperBox to import a new license file.

Post Reply

Return to “Effects”