KVR Audio

plexuss · Post by **plexuss** » Mon Jan 05, 2026 6:45 am

- Macos: VST3/CLAP/AudioUnit(v2) ARM & Intel (non-AVX)

devproaudio · Post by **devproaudio** » Mon Jan 05, 2026 10:41 am

I remember, guys, just give me some time

Regards,
Denis
DEVPROAUDIO
https://devproaudio.com

devproaudio · Post by **devproaudio** » Mon Jan 05, 2026 4:28 pm

I have updated the Windows installer. Now it includes a setup (install_for_old_cpu.exe) for old CPUs that do not have support AVX2: it shall run ok on CPUs of 2006-2013.

Regards,
Denis
DEVPROAUDIO
https://devproaudio.com

jbraner · Post by **jbraner** » Mon Jan 05, 2026 7:01 pm

I finally got a setting in 3D mode that doesn't sound way too "wet".
I copied one of the "POS" presets and then tried to make a lot of the settings like Room 01.
I think it has to do with the ER and LR gain settings. Do the 3D models not use any LR?
It seems to sound best with LR gain = 0. (and that's what the Pos_45L preset uses.)

asstudioton · Post by **asstudioton** » Wed Jan 07, 2026 8:14 am

This plugin sounds really good. When is the official release of this plugin scheduled?

devproaudio · Post by **devproaudio** » Wed Jan 07, 2026 5:40 pm

>regarding 3D

there are currently only a couple of presets that use LR 3D.
I need to spend some time making presets that demo all this stuff properly.

and for LR 3D one has to make sure that LR Cross is low (below 10%) and LR SPREAD is above 15%
and as in case with ER's 3D, the position arrangement must be asymmetric.

>release date

hopefully march

Regards,
Denis
DEVPROAUDIO
https://devproaudio.com

devproaudio · Post by **devproaudio** » Sat Jan 10, 2026 3:49 pm

Intel Mac Build is now available for downloading on the web site.

IMPORTANT NOTES:

1) Mac Intel build has been tested on old cpu only at the moment, however the binary contains optimised dynamically-dispatched code branches for AVX2/AVX512 enabled systems. If you have such a system please test and report to me.

The code branch info is now displayed in plug-in version/info string on about page (click on DEVPROAUDIO or REVERSIDE in top bar to see)

so for pre AVX2 system it will display: SSE2:4
for AVX2: AVX2:8
for AVX512: AVX512:16

2) Mac Intel build requires MacOS version 10.15 (Catalina) as a minimum

if it does not run on your system please collect debug logs in:
/Users/<user>/Music/Devproaudio/logs/reverside
and send to info@devproaudio.com

Regards,
Denis
DEVPROAUDIO
https://devproaudio.com

devproaudio · Post by **devproaudio** » Thu Jan 22, 2026 5:00 pm

REVERSIDE 0.9.7.b530 VST3/CLAP/AUv2 Reverb Plug-In is now available.

Currently supported formats are:
- Macos: VST3/CLAP/AudioUnit(v2) (ARM/Intel)
- Windows: VST3/CLAP

VERSION 0.9.7.b530 CHANGES
-------------------------------------------------------------------------
- Improved Preset Browser:
a) favorite presets support added
b) auto-load presets
c) importing/exporting preset banks/folders/files
d) linking external preset banks/folders
e) Clipboard Copy/Paste
f) Showing In Finder/Explorer
g) confirming file/folder actions with enter key
- Plug-in Window resizing by dragging corner now works properly
- Plug-in Help page in bottom bar now displays current param value
- Gain control on MIX page now auto-latch to 0.5/0.1(fine) increments
- Open Mini Preset Browser buttons added to all Filters
- A set of sub-presets for material/decay/EQ filters included
- DSP: Improved Early Reflections 3D Spatialisation algorithm
- DSP: Improved Late Reflections density modeling algorithm
- Improved DSP and UI synchronization
- Various other reverb algorithm, DSP improvements and fixes
- Updated preset bank from Rumba Codex included

Mac/Win Demo versions are available for download on the website.

Demo Version Limitations:
- Preset saving is disabled
- Plugin state is not restored from DAW project files
- Only one instance per host

REVERSIDE is free for all 2CAudio and SpinAudio users.
The Plug-In is available for purchase for special pre-release price of 115 USD.

Questions, feedback and beta testing requests are welcome at: info@devproaudio.com

Denis
DEVPROAUDIO
https://devproaudio.com

VariKusBrainZ · Post by **VariKusBrainZ** » Thu Jan 22, 2026 6:07 pm

Does the demo unlock with our serial?

devproaudio · Post by **devproaudio** » Thu Jan 22, 2026 7:40 pm

beta serials will work until this particular build expires (on 1st march 2026) while full version serials will make it run forever. so yes both types of serial will do.

Denis
DEVPROAUDIO
https://devproaudio.com

VariKusBrainZ · Post by **VariKusBrainZ** » Thu Jan 22, 2026 9:26 pm

Thank you

jbraner · Post by **jbraner** » Sat Jan 24, 2026 4:12 pm

Not a lot to say - this reverb must be getting ready for release

One question - why is there a 3D setting (for Q1, Q2, Q3) on the "Time" tab - under "Cross" that can be different from the one on the "Space" tab (REFL 3D)?
Surely those are both setting the same thing (Q1, Q2 or Q3) but they can be set differently.

Also - I am convinced that the settings for 3D spaces are still better with "Mix" < 100%. The RumbaCodex presets do this and it just sounds better. For me (maybe I'm wrong) using Mix = 100% for the 3D settings is too wet.

Anyway - I look forward to this being released, so I can use it for something more than "test projects"

devproaudio · Post by **devproaudio** » Sun Jan 25, 2026 7:44 pm

>One question - why is there a 3D setting (for Q1, Q2, Q3) on the "Time" tab - under "Cross" that can be different from the one on the "Space" tab (REFL 3D)?
Surely those are both setting the same thing (Q1, Q2 or Q3) but they can be set differently.

3D Settings on Time tab are Early Reflection's 3D settings while Space tab's pertain to Late Reflection's 3D. and well internally they are somewhat different. The latter can be used to enhance a depth of a stereo image.

>Also - I am convinced that the settings for 3D spaces are still better with "Mix" < 100%. The RumbaCodex presets do this and it just sounds better. For me (maybe I'm wrong) using Mix = 100% for the 3D settings is too wet.

one can of course use mix < 100%, you'd just have some non-spatialised signal in the output.
mix=100% recommendation applies only when one wants to use Reverside as a 3D Placement tool, like as if you need to mix orchestral instruments placed at different locations in a shared acoustic space.

Denis
DEVPROAUDIO
https://devproaudio.com

jbraner · Post by **jbraner** » Sun Jan 25, 2026 8:11 pm

3D Settings on Time tab are Early Reflection's 3D settings while Space tab's pertain to Late Reflection's 3D. and well internally they are somewhat different. The latter can be used to enhance a depth of a stereo image.

aah OK - that makes sense now

mix=100% recommendation applies only when one wants to use Reverside as a 3D Placement tool, like as if you need to mix orchestral instruments placed at different locations in a shared acoustic space.

I know I keep mentioning this - it just sounds too "wet" for me.
I only mention it to see what anyone else thinks

It's coming along very nicely though Denis

pekbro · Post by **pekbro** » Mon Jan 26, 2026 10:55 pm

REVERSIDE is shaping up great! Thanks so much for the lic Denis

Introducing REVERSIDE [BETA] new reverb plug-in from the author of Aether