Can somebody explain to me what gainstaging really is?

[jt230115]

I have been producing for a bit now, but gainstaging is still something that I still can't really wrap my head around. Can somebody please explain to me in the most simplest way possible?

[havran]

I'll make an attempt and request corrections as needed.

Gainstaging is about making the signal as loud as possible without distortion at every point in the signal chain.

A visual analogy would be something like letting the fine details fill the available canvas without becoming pixelated or smeared.

[havran]

Linking this separately because I'm not sure it would be allowed according to forum rules:

https://www.sweetwater.com/insync/gain-staging/

Edit: Oh! I see Sweetwater advertises on KVR, so the link might be allowed. Sweetwater has a pretty good section for learning about production-related topics.

[Tracewidth]

I'll echo: gain staging is about making sure that your gain is right (not too great, not insufficient) at every stage in the signal chain.

[Benedict]

It is hard to wrap your head around Gain Staging now because just about everything everyone says about it these days is utter BS. Largely because they don't understand that the concept does not have quite the same drivers as it had when it really was needed.

In the old days, anal log fires and all that, there was the sound that we wanted (signal) and the sound that we did not want (noise). The need was to maximize signal and minimize noise (and no you couldn't just apply a WAD Plugin to deNoize). This was expressed as Signal-to-Noise Ratio.

Seeing everything that we did (including nothing) added noise, we had to make sure that at every stage of the recording - mixing process, we had the most signal we could get without a) on one side more background hiss than signal and b) on the other side too much distortion from trying to hard to drown out the hiss and other nasties endemic to log fire uasge.

In other words, if someone sent me a vocal with a lot of noise, I would send it back, suggesting that they learn some mic technique or go to a real studio, as their signal-to-noise ratio was poor.

When it came to mixing, one generally needed to feed a good balance of signal to the desk and any other devices used like Chorus and Echo units to balance signal-to-noise. There is and never was a magic number, as ears and brains were used to see how it felt, based on the needs of this song.

Within that, it made no sense to take your -264dB Juno 6 sine wave lead (ha! as if there was such a thing as a sine wave, how cute), put it through a Big Muff Fuzz and Eddie V's 5150 and bring it back to the desk at +568dB as now the signal was not usable for injecting into the Tape Delay as that went full spastic at +3dB (actually more like -6dB but we liked it hot).

Soooo we aimed to make sure that at every stage of our signal, we kept things where they were needed for what came next.

And that there is Gain Staging. No rules other than make sure that at every stage of our signal, we kept things where they were needed for what came next. All this tripe that happened in the last few years is bs made up by YooBooberz looking for Playz and to sell you BST.

[Watchful]

Take a mic, run it into a preamp. If the vocalist is too loud, you trim the input until she's in the green or yellow.

Connect the preamp into a compressor. If the compressor flickers into the red, you trim the levels until it's green or yellow at most.

Plug the compressor output into a mixer. If the input goes red, you trim it until everything...from vocalist's mic to the mixer...is in the green.

You are adjusting the gain...in stages. Hence, gain staging.

You do that for the guitarists, the drummers mics, the bass...etc.

For a live band, this can take a while and is standard for sound checks. Today, if you're working in the box, gain staging is still important but a lot easier to do. And if you work with the same equipment and settings every day, you pretty much do it once and forget it.

[Seafire Mk2]

Google it