KVR Audio

kode_poet · Post by **kode_poet** » Thu Feb 17, 2005 6:28 am

I got across a problem in FLStudio's mixer. Is there a way to route a single audio channel to 2 other channels?

I want this for vocals. Send a single vocal channel to 2 different ones, apply effects on those, and then convine all 3 of them in a single Vocal BUS. Or better explained.

_________Vocal_1

Vocal > Vocal_2 > Vocal Bus

_________Vocal_3

Is there a way to do this? So far I've had to load 3 differnt copies of the same file and route them to different channels. Any tips?

ouroboros · Post by **ouroboros** » Thu Feb 17, 2005 6:33 am

Voice channel1-->Send1-->send2

easy to send one channel to two busses, not sure about the combining them afterwards.

kode_poet · Post by **kode_poet** » Thu Feb 17, 2005 6:46 am

Yes, I thought of using up the sends. But I would have to use 3 of them. and then the rest of the project would be Sendless LOL. I guess making copies of the same track and assigning them is the best thing to do, unless someones comes up with a cool tip.

speccyteccy · Post by **speccyteccy** » Thu Feb 17, 2005 9:11 am

Senderella might help:

http://www.kvraudio.com/get/1433.html

kode_poet · Post by **kode_poet** » Thu Feb 17, 2005 1:33 pm

OMG dude you are a godsend. Senderella is exactly what I was looking for. Thanks man.

speccyteccy · Post by **speccyteccy** » Thu Feb 17, 2005 1:43 pm

Just a note to say that you can't send stuff backwards with Senderalla - i.e. you can send stuff from FX2 to FX1 for example.

Hink · Post by **Hink** » Thu Feb 17, 2005 4:08 pm

on the bottom of the mixer you can also set the output of any channel to the input of any channel if this helps...

ouroboros · Post by **ouroboros** » Thu Feb 17, 2005 4:42 pm

hink wrote:on the bottom of the mixer you can also set the output of any channel to the input of any channel if this helps...

That has not worked for me. Is it only possible with ASIO drivers or something?

-SPYRO- · Post by **-SPYRO-** » Thu Feb 17, 2005 4:50 pm

Senderella IS the tool for this. Highly recommended, I use it all the time, is rock solid.

kode_poet · Post by **kode_poet** » Thu Feb 17, 2005 5:03 pm

hink wrote:on the bottom of the mixer you can also set the output of any channel to the input of any channel if this helps...

Yes I know that. You can send several channels to ONE channel, but not one channel to Several others, which is what I needed. The little tool that speccyteccy posted was exactly what I needed. Thanks guys.

Hink · Post by **Hink** » Thu Feb 17, 2005 5:23 pm

kode_poet wrote:
hink wrote:on the bottom of the mixer you can also set the output of any channel to the input of any channel if this helps...
Yes I know that. You can send several channels to ONE channel, but not one channel to Several others, which is what I needed. The little tool that speccyteccy posted was exactly what I needed. Thanks guys.

I have senderella but have never used it. But that's because I use AA as well for all my mixing, multi-tracking and audio recording. So when I render in FL it's all dry and all pretty much not messed with at all. Then I render through the mixer as opposed to split mixer tracks (it still splits the tracks but you can choose which tracks to render) and work in AA. One cool thing you can do with AA is split tracks by frequency to up to 8 new tracks. Very nice if you ask me...

Vonbrucken · Post by **Vonbrucken** » Thu Feb 17, 2005 5:58 pm

good tip you've brought here hink

FLStudio Mixer