u-he

tasmaniandevil · Post by **tasmaniandevil** » Wed Mar 30, 2022 4:51 am

jue wrote: Tue Mar 29, 2022 7:46 pm It crashes every Daw on OSX 10.13.6 here.
It loads fine but when the editor is opened CRASH.
Last version loaded today

What Funkybot said.
It's either an installation issue or a permission issue.
If you can't get it fixed yourself by reinstalling, then simply contact our support and we'll help you: https://u-he.com/support/#contact

Sascha Franck · Post by **Sascha Franck** » Sun May 22, 2022 6:39 pm

How in the world did I miss this?
Ah well, might be because I'm not on KVR that often anymore since a while. Should possibly change that.
Will try this baby out later.

PsychicVST · Post by **PsychicVST** » Fri May 27, 2022 4:01 pm

I spent a few hours really digging into MFM2.5 yesterday and, like all uhe products, it’s incredible.

I don’t have any experience with the original version but skimmed the manual and think I mostly have my head around MFM2. I do have a few questions though.

Is there a bypass button on the GUI? Maybe I missed it.

Is there a way to have the MSEGs run freely rather than be midi triggered?

(Edit: I figured this out. You click on a key on the modulation window)

Is there a manual for the this newest version?

tlkmx · Post by **tlkmx** » Wed Jun 08, 2022 8:24 am

PsychicVST wrote: Fri May 27, 2022 4:01 pm I spent a few hours really digging into MFM2.5 yesterday and, like all uhe products, it’s incredible.

Where did you downloaded it ?
I thought the release would happen soon but it keep being delayed

masterhiggins · Post by **masterhiggins** » Wed Jun 08, 2022 8:27 am

tlkmx wrote: Wed Jun 08, 2022 8:24 am
PsychicVST wrote: Fri May 27, 2022 4:01 pm I spent a few hours really digging into MFM2.5 yesterday and, like all uhe products, it’s incredible.
Where did you downloaded it ?
I thought the release would happen soon but it keep being delayed

It’s in the first post.

Urs · Post by **Urs** » Wed Jun 08, 2022 9:17 am

The release is getting closer as we've been waiting for CLAP to finalise, and that has just happened. There'll be a new round of betas some time next week.

TENETfanboy · Post by **TENETfanboy** » Fri Jun 10, 2022 2:42 am

Urs wrote: Wed Jun 08, 2022 9:17 am The release is getting closer as we've been waiting for CLAP to finalise, and that has just happened. There'll be a new round of betas some time next week.

Guess it’s time for me to finally pick up MFM then!! I’ve been holding off on it while awaiting the new version, excited to see it soon

Krakatau · Post by **Krakatau** » Fri Jun 10, 2022 5:36 am

I just download it but,...how do we get now the keyboard ???

silly me ...under "modulation" pages

tasmaniandevil · Post by **tasmaniandevil** » Wed Jun 15, 2022 9:59 am

A new MFM2.5 beta, revision 13207 is out now.
You can find it over here in the official CLAP thread: viewtopic.php?t=582950

And here's what's changed in MFM2.5 since the first beta, revision 12536:

* The clipper now has an additional -6dB threshold option
* The preset library has been polished and finalized
* The preset context menu now has a copy & paste option
* The last played MIDI note is now ignored when the preset changes
* Some parameter names have been adjusted (e.g. Lfo > LFO)
* GUI now remembers its last state when it's being reopened
* Removed zipper noises that occurred when adjusting some parameters
* Removed the option to save a MIDI note in the preset file
* Fixed yet another LFO reset hiccup
* Fixed a couple of issues in the preset browser of the Linux version
* Fixed a crash when using the "Show in Finder/Explorer" option in the preset browser
* Fixed a rare issue which led to no presets being displayed in the browser
* Fixed an issue with enumeration of duplicates in the browser
* Quite a few more little fixes here and there

A note about the removal of the option to save a specific MIDI note inside the preset file.
While this was a nice option for certain presets that relied on a specific MIDI note to be held, we realized that the potential for confusion and accidentally saving this data with the preset outweighs the benefits.

Erik_Lucas · Post by **Erik_Lucas** » Wed Jun 15, 2022 1:03 pm

This is easily the best delay unit ITB I've used, and has been replacing all my other delay plugins since downloading it. Very very nice looking UI too!

killmaster · Post by **killmaster** » Wed Jun 15, 2022 5:28 pm

Erik_Lucas wrote: Wed Jun 15, 2022 1:03 pm This is easily the best delay unit ITB I've used, and has been replacing all my other delay plugins since downloading it. Very very nice looking UI too!

"ITB" ?

Ploki · Post by **Ploki** » Wed Jun 15, 2022 5:29 pm

killmaster wrote: Wed Jun 15, 2022 5:28 pm
Erik_Lucas wrote: Wed Jun 15, 2022 1:03 pm This is easily the best delay unit ITB I've used, and has been replacing all my other delay plugins since downloading it. Very very nice looking UI too!
"ITB" ?

"in the box"
computer based

krans · Post by **krans** » Wed Jun 22, 2022 1:17 pm

Just out of curiosity: Why is the 13207 build still a beta/preview?
What's left?

From my simple user point of view it's so stable and complete (and simply amazing) that it's hard to find more to desire.

Urs · Post by **Urs** » Wed Jun 22, 2022 2:14 pm

krans wrote: Wed Jun 22, 2022 1:17 pm Just out of curiosity: Why is the 13207 build still a beta/preview?
What's left?

From my simple user point of view it's so stable and complete (and simply amazing) that it's hard to find more to desire.

A few parameters are not yet available for parameter modulation... there are few little bugs...

noiseresearch · Post by **noiseresearch** » Thu Jul 21, 2022 5:40 pm

▒░░░░▒▒▒▒▒▒▒▒▒▒░░▒▒▒▒▒▒▒▒▒▒░░▒▒▒▒░░▒▒▒▒░░░░░░▒▒▒▒▓▓▒▒▒▒░░░░░░░░▒▒▒▒░░▒▒▒▒▒▒░░▒▒░░▒▒░░▒▒▒▒░░▒▒▒▒▒▒▒▒
▒▒░░▒▒▓▓▒▒░░▓▓▒▒░░▒▒▒▒▒▒░░░░▓▓░░▒▒░░░░░░▓▓▒▒░░▒▒▒▒░░▒▒▒▒▓▓▒▒▒▒░░░░▒▒▒▒░░▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░▒▒▒▒░░▒▒▒▒░░▒▒▒▒▒▒░░▒▒▒▒░░░░▒▒▒

u-he

KVR Audio

MFM2.5 preview (updated to revision 13207)