KVR Audio

youaregreat · Post by **youaregreat** » Sat Mar 14, 2020 1:38 am

I uninstalled using control panel and then tried to reinstall in bridged 64bit. The installer is now telling me that my serial is invalid. Anybody have this problem/solutions?

In the Attic Recors · Post by **In the Attic Recors** » Sat Mar 14, 2020 1:46 am

I installed in Ableton and it just crashes it every time. Ran it as admin and normally. Anyone else?

eyezermusic · Post by **eyezermusic** » Sat Mar 14, 2020 2:00 am

NextGen wrote: Sat Mar 14, 2020 1:17 am
eyezermusic wrote: Sat Mar 14, 2020 1:01 am I managed to get it to run since someone in this thread said you have to run your DAW as an admin. That in turn creates plenty of problems for people (like me) who are not using an admin account. If I run FL studio as an admin, I can't drag and drop midi files and samples. All my VSTs go into demo mode or enter serial mode. Why on earth would a VST synth require admin access?

I also get crackling sounds from Genesis Pro, which most likely is a bug (I had the same problem in another VST, I told the dev about it and he sent me a beta version where the problem is gone, hence my suspicion that this is a bug in Genesis Pro).

This VST needs to have these 2 mentioned problems fixed or it will be a useless synth for a lot of people.
Please use 32-bit Genesis Pro in 64-bit FL Studio(ILBridge). You don't have to run as Admin.
The administrator account is only necessary with the Jbridge version.

Also the crackling noise wont be there when you use 32-bit Genesis with 64-bit FL Studio. That should work smoothly!

I did what you suggested before and it did not work. I went for a late night walk and just came back and now Genesis Pro works without admin access and no crackling sounds either. Weird, but it appears to work now at least

dionenoid · Post by **dionenoid** » Sat Mar 14, 2020 2:33 am

eyezermusic wrote: Sat Mar 14, 2020 2:00 am
I did what you suggested before and it did not work. I went for a late night walk and just came back and now Genesis Pro works without admin access and no crackling sounds either. Weird, but it appears to work now at least

They should put that in the faq for every piece of software : If it ain't working, go for a walk

daradei · Post by **daradei** » Sat Mar 14, 2020 2:35 am

Cakewalk?

winston444 · Post by **winston444** » Sat Mar 14, 2020 2:37 am

AUTO-ADMIN: Non-MP3, WAV, OGG, SoundCloud, YouTube, Vimeo, Twitter and Facebook links in this post have been protected automatically. Once the member reaches 5 posts the links will function as normal.

It's March 13th, 24 hours after Oz said the product would be available. Just now, I went to this link
https://webshop.oz-soft.com/en/content/8-genesis-pro (https://webshop.oz-soft.com/en/content/8-genesis-pro)
I went to paypal and paid him my 1 dollar and 41 cents, and was sent a receipt. The download link and the serial number were provided in the order Details tab.
I downloaded the software, closed my DAW, installed Genesis Pro, opened my DAW and the project I was working on.Genesis Pro was there among my other VSTis. I added it to my project, found a nifty bass patch in --oh, I don't know, all of 4 minutes, performed the part, and it's all done.
The entire process took my all of a half an hour. For less than 2 dollars.
Why are people complaining?

strovoknights · Post by **strovoknights** » Sat Mar 14, 2020 2:49 am

Installer size 598MB and good OSC waves and samples include.
Working fine with Bitwig 3.1.3,win10.
I did instll 64bit files,but nothing anywhere.

alexbaroni · Post by **alexbaroni** » Sat Mar 14, 2020 2:59 am

Ableton Live 64bits version and a lot ok crackles on lot os patchs. FL 20 worked ok with 32 bits

ScottZ · Post by **ScottZ** » Sat Mar 14, 2020 3:06 am

my download keeps failing after halfway done any workarounds tried a jdownloader, so I could resume the download instead of it just auto restarting every time, but no luck.

an-electric-heart · Post by **an-electric-heart** » Sat Mar 14, 2020 3:12 am

winston444 wrote: Sat Mar 14, 2020 2:37 am It's March 13th, 24 hours after Oz said the product would be available. Just now, I went to this link
https://webshop.oz-soft.com/en/content/8-genesis-pro
I went to paypal and paid him my 1 dollar and 41 cents, and was sent a receipt. The download link and the serial number were provided in the order Details tab.
I downloaded the software, closed my DAW, installed Genesis Pro, opened my DAW and the project I was working on.Genesis Pro was there among my other VSTis. I added it to my project, found a nifty bass patch in --oh, I don't know, all of 4 minutes, performed the part, and it's all done.
The entire process took my all of a half an hour. For less than 2 dollars.
Why are people complaining?

Damage-control Bot to the rescue.

teilo · Post by **teilo** » Sat Mar 14, 2020 3:14 am

I have it installed and registered, but the plugin GUI will not come up in Vienna Ensemble Pro Server 32-bit. The UI window is empty.

The Genesis Pro presets DO come up. I can choose Genesis Pro presets in VEP, and play them on the Mac in Bitwig, Logic, and Ableton just fine.

I use VEP to bridge Windows VSTs over to Mac over the network, and it has always worked great on everything I throw at it.

Scotty · Post by **Scotty** » Sat Mar 14, 2020 3:33 am

I installed the 64 bit version... I am still on Windows 7 64 bit for another week. Cubase 10 picked up the plugin no problem. I am not running in administrator mode. So far so good. I am not overwhelmed but for under $2.00 you could do far worse. The arpeggiator is interesting and the after-touch support in the mod matrix is useful. Graphics are well done. Gui is too small for 4k monitor at 28 inches but I am not surprised by that as many have that issue. Some of the pad presets are done very well. CPU use is low if you are at 128 samplers or higher... some clicking when reverb is selected as an effect. It feels more like a usable beta with some rough edges. Not disappointed... it was roughly what I expecting. Happy to support the developer. I expect that more preset banks will be developed and no doubt it is quite easy to make your own... Just my quick thoughts.

emid · Post by **emid** » Sat Mar 14, 2020 3:38 am

No problem with installation on Studio One x64. But I can't move the folder to my other drive as giving error. Will try again but so far all good.

alexbaroni · Post by **alexbaroni** » Sat Mar 14, 2020 3:41 am

Ableton Live 64bits version - lots of crackles
FL 20 with 32 bits - Great. But I can´t see the plugin since my screen is 4000x3000 (MS Studio)
FL 20 with 64 bits version - lots of crackles.

This 64 bit implementation is not working.

Rivanni · Post by **Rivanni** » Sat Mar 14, 2020 3:55 am

No_Use wrote: Sat Mar 14, 2020 1:08 am Yeah running DAW as admin prevents DnD files from explorer, would be a no go for me too.

A program in Admin mode cannot access programs that are not running in Admin mode.
Run Explorer also in Admin mode and DnD will work.
That said, it shouldn't be necesarry to run your DAW in Admin mode in the first place.