KVR Audio

Vstream · Post by **Vstream** » Sun Apr 19, 2009 10:39 am

The price of the Vrack looks very O.K. to me.
+/- 1000 Euro

http://www.musik-schmidt.de/products/de ... -Rack.html

We only need mature VFX software, creation of snapshots like the muse software & brainspawn forte & openlabs and easy fxb loading.

gafaell · Post by **gafaell** » Sun Apr 19, 2009 12:25 pm

delafuerte wrote:
VFXAU wrote: common, what's not right for you does not mean it is not right for others, in fact a high % of users use the v-machine for what it is and understand the functionality, what else could give them this portability or stability ?
Cm'on Danny...it's a little sarcasm

In the meantime, another week without any update or news about the CPU upgrade.

Yes, wait for another week, ha, ha, ha...

I just do not trust SM PRO anymore. I'm afraid they do not have this in mind, no firmware upgrade or hardware upgrade.

Good luck. I sold my VM this week, don't want to waste more time on it.

shangospirit · Post by **shangospirit** » Sun Apr 19, 2009 12:28 pm

sorry to bump this.

But is there a control audio unit plug in or not?

and are the synth edit created vsts working?

This really interests me because that would make me order a v machine straight away.

ZioKiller · Post by **ZioKiller** » Sun Apr 19, 2009 1:44 pm

shangospirit wrote: But is there a control audio unit plug in or not?

and are the synth edit created vsts working?

The V-Machine has no connection with Audio Units at all.
And yes, the SE-made plugins do work, most of the factory bundled plugins are freeware SE-made plugins.

mäxchen · Post by **mäxchen** » Sun Apr 19, 2009 7:12 pm

Has anybody got the "ParamFeedback" working? Here it isnt working.

@ZioKiller: when i change a param at KeyPerfomer (example Volume (CC7)) and the param volume is displayed on the v-machine the param value is not updated "online". when i step to another param and go back to volume then the new value is displayed. is that a problem of your plugin (i dont believe that) or of the v-machine firware (i think) ? is it possible to remote control keyperformer via relative CC?

max

max

ZioKiller · Post by **ZioKiller** » Sun Apr 19, 2009 7:23 pm

mäxchen wrote: @ZioKiller: when i change a param at KeyPerfomer (example Volume (CC7)) and the param volume is displayed on the v-machine the param value is not updated "online". when i step to another param and go back to volume then the new value is displayed. is that a problem of your plugin (i dont believe that) or of the v-machine firware (i think) ? is it possible to remote control keyperformer via relative CC?

Yes, you can control KP via Midi CC (you can either use KP's built-in MIDI Learn function or that provided by the host).

I'm sorry, I can't understand your first question...

VFXAU · Post by **VFXAU** » Sun Apr 19, 2009 11:58 pm

shangospirit wrote:sorry to bump this.

But is there a control audio unit plug in or not?

and are the synth edit created vsts working?

This really interests me because that would make me order a v machine straight away.

Hi,

Yes you can use soundflower and run the windows plugins from logic thru the VFX application

mäxchen · Post by **mäxchen** » Mon Apr 20, 2009 4:30 am

hello ziokiller,

try this: at KP midi CC7 is set zo volume in the KP ini file. so search at the v-machine the param volume from KP. the value of the volume is shown in the display. now take a midi controller that sends cc7 and send. the value on the diplay at the v-machine will not change when you send another volume value.
i hope you could understand.
my second question was not about te ability to remote control KP via midi (i do this). the question is: do KP understand REALTIVE midi CC or only ABOLUT midi CC ?

max

the first question goes to VFXAU too. you can try this with the demo of KeyPerformer

delafuerte · Post by **delafuerte** » Mon Apr 20, 2009 8:00 am

VFXAU wrote:
Seriously regarding the CPU upgrade for the V, we are testing several boards (the internal CPU board) at the moment to see what will work properly (without any heat issues) and what will be the cost of it as well. I am unsure if people would spend $175 for doubling the CPU power or not right now or hold off a little longer to have something around $100 to do this with extra ram.

I think that the perfect CPU size for the VM is about 2 ghz; instead what do you mean when you talk about something around 100$? 1,5 ghz...1,6 ghz....exactly what? And the extra RAM?

BTW I think it's better to invest more in the CPU since upgrading the RAM is much easier, once you upgrade the CPU this will be the final solution I guess, so the hard part of the work would have been done....moreover I've already upgraded the ram to 1 gb and I have not seen so significantly changes in the VM performaces.

But I'd really like to understand exactly what you're talking about.

thanks

ZioKiller · Post by **ZioKiller** » Mon Apr 20, 2009 8:41 am

mäxchen wrote: try this: at KP midi CC7 is set zo volume in the KP ini file. so search at the v-machine the param volume from KP. the value of the volume is shown in the display. now take a midi controller that sends cc7 and send. the value on the diplay at the v-machine will not change when you send another volume value.

Ah ok. This depends on the host, and happens not only with the VFX, but I found many other hosts that don't refresh the internal values when controlling parameters from MIDI. This happens with all plugins.

mäxchen wrote: my second question was not about te ability to remote control KP via midi (i do this). the question is: do KP understand REALTIVE midi CC or only ABOLUT midi CC ?

No, only absolute values. If the parameter is at e.g. 112 and you send e.g. 65, the parameter value jumps to 65.

mäxchen · Post by **mäxchen** » Mon Apr 20, 2009 5:10 pm

ok, thx for the fast answer zio. is it planned to implement relative CC's? maybe as option? that would be great. i would pay a few bucks for this "update".

max

VFXAU · Post by **VFXAU** » Mon Apr 20, 2009 11:50 pm

Latest Version is uploaded now

VFXAU · Post by **VFXAU** » Mon Apr 20, 2009 11:53 pm

Has the following:

* Various gui and functional fixes.

* Save overwrite confirmation on Windows

* App checks connected V-MACHINE's build number

* Global V-Machine state persists to disk

* Input gain save/load

* Select and confirm

* Windows app has transparency

* 3rd party plugin V-Machine plugin support fleshed out (message popups, authentication, etc)

* Plugin MIDI chaining.

* Importing plugins from stick correctly detects already imported plugins.

* Only internal plugins ever get deleted.

Several other internal checks...

Please be carefull (PC USERS) as the PC and MAC are the same version now in feel and look so the power button is actually a POWER BUTTON, not the menu it was before, right click to get the menu. You will also see some extra options there which are in the software but yet to implement in the firmware.

bencrossman · Post by **bencrossman** » Tue Apr 21, 2009 1:07 am

I noticed it also has syncrosoft dongle support!
Let me know if anyone gets the Korg Legacy Collection working on it like the M1 or Wavestation

MatthewSkinner · Post by **MatthewSkinner** » Tue Apr 21, 2009 2:32 am

The korg legacy collection used to work without a dongle so if you source an older version of the plugins then they will work right now as the dongle is not required. The latest versions require a 'syncrosoft dongle' and this support is something which is currently under development.

A user made wizard file is up on our website for the MS20 (I noticed there is no blank line at the end of the wizard so you would need to add this) and I have had the wavestation and most of the plugins in the collection working with older versions.

They only need 1 or two files directly next to the DLL so very simple to get working if your using an older version of the plugin before syncrosoft was added.