MSF - loud thump noise when adjusting some FX parameters from zero to something
-
Sampleconstruct Sampleconstruct https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=191286 - KVRAF
- Topic Starter
- 16805 posts since 12 Oct, 2008 from Here and there
-
MeldaProduction MeldaProduction https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=176122 - KVRAF
- 14339 posts since 15 Mar, 2008 from Czech republic
PerfectSampleconstruct wrote: Sat Aug 10, 2019 11:57 am Yes, thanks for fixing the flanger, works fine now.
. Feel free to tell me about other cases of this "optimizations go wrong" 
-
Sampleconstruct Sampleconstruct https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=191286
- KVRAF
- Topic Starter
- 16805 posts since 12 Oct, 2008 from Here and there
Will do.MeldaProduction wrote: Sat Aug 10, 2019 12:00 pmPerfectSampleconstruct wrote: Sat Aug 10, 2019 11:57 am Yes, thanks for fixing the flanger, works fine now.
-
- KVRist
- 460 posts since 25 Jan, 2016
I do not know if this is the same complaint that Sampleconstruct initially made but I noticed an odd spike in volume when using a modulator. I removed as much as possible before submitting this here.
The above is a MDelayMB patch with all values in the Band and Tap settings at their default value with the exception of the Right offset being modulated by Mod 1 using a Saw shape. Preset selector B has the same Mod 1 using a Sine shape.
When activating the Mod 1 using Preset A on an empty track (no sample or VST routed to the mixer track and without hitting play in an empty project) a volume spike occurs after about 15 - 20 seconds. This does not appear to happen with the same settings while using Preset B (Sine shape modulator).
In my attempts to try and narrow things down, the spike does not seem to occur with a smaller range set in Mod 1 (I began setting the Mod 1 to move the offset from -0.1 to 0.1 and increased the values until I noticed the spike. The spike also occurs if the Sync rate of Mod 1 is moved in either direction.)
Can anyone verify that this occurs on other systems?
Code: Select all
$eNrFVE1P4zAQvfdXWNMrENv9SqU4iJZ2F6mFqEFwRKZxUwvXrmynUH79Km7DFtBK3PYSx+Pxm-dmxpNcvm0U2gnrpNEMyAUGJPTSFFKXDCq-Oo-hMm0l82uh+H4+csJ7qUuH2gwIoLFRim+dKOaV8jLjlm9m07uMa6EYYEBja5wzO2HnphAMaLcYRWbpTw7u91vB4EpzZUpA48paoX1mhRP+5poBOX-mugA0KaQ3NpfvggGhA3o2wPjUOuFuz4DgXnzWHcaAZlK-BAazRb5V0nsR3AiDfveblTLokAGgvyKEF9Z9iAtAd5XfVv4Xl5rBOb4gcWdIcYeQmHQBPTQJjHt0OKSQJh8Ca2n7d2EpyjfG+LUWzjHAF7gH6FHqwrweUvCbaw1pklmxksoLK3WZJpmR2qOp4qUbMSBdAuitrlIHE0yHw2Gv34foX27dr27RZ-CrDKOJ5s+qVkgAZYK-uPCXr83r2ChjH7iqRLDV179rSltJXR98bIf2xhR1jq-FilfKA2ovZLn2d6uVEz6IxrgT90iXxj0cD-qA2m6vl0ro0q+fnggDgiJEIUpbyWx659L6i9GheW6N3XBVp6ipEJpWSi24LgWDLqA5fwt860A9TAF9ON7yjWAw4rpABJ2je74NayCHTGAH6AiELwitK9oghXYKuxFfvlTbgF6nY6J3QpmtiNIkl6XmCuX3kyxbTPLJfeiY3QGCdGrvfK+Xn7I9C6Kb1NY6g1ryI7X4m7hru-8JqYZJE5020UmITv9TdBqid-5T9M5hcWkrGRvtrVFKWJeebD4-lBMy37vsSCY6RWolV0svd+Iw15opd2q70SvD4GMAnh4dYA-D7tAurWQeBhRNk0dZ+PU8TXJT2aVApw-8KDlqXKLmUiuJvoxzl7b+AB+95i8=When activating the Mod 1 using Preset A on an empty track (no sample or VST routed to the mixer track and without hitting play in an empty project) a volume spike occurs after about 15 - 20 seconds. This does not appear to happen with the same settings while using Preset B (Sine shape modulator).
In my attempts to try and narrow things down, the spike does not seem to occur with a smaller range set in Mod 1 (I began setting the Mod 1 to move the offset from -0.1 to 0.1 and increased the values until I noticed the spike. The spike also occurs if the Sync rate of Mod 1 is moved in either direction.)
Can anyone verify that this occurs on other systems?
-
MeldaProduction MeldaProduction https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=176122
- KVRAF
- 14339 posts since 15 Mar, 2008 from Czech republic
Yes, this one is related to the positive/negative left/right delays, which I'm afraid is the way it is.