Problems with importing / exporting audio in T2

[Beno]

There is confusion here. The XD-2 interface has three modes, one for 44.1/48k, one for 96k, in and one for 96k out. The software should be set to 48k max mode. But the actual sample rate selected in Tracktion should be 44.1. Now unless you are using SPDIF to clock your system (which I assume you aren't) be sure the Sample Clock Selection setting in the XD-2 Softapp is set to XD-2 and not SPDIF. That may be causing some clock problems. Then just be sure tracktion is set to 44.1 on the settings tab. Another thing to check is to be sure windows isn't using the XD-2 for systems sounds, etc as it could be screwing up the Sample Rate.
Ben