Ableton Live 11
-
- KVRian
- 930 posts since 14 Dec, 2014
I think KN is for "peaK Notch" filter, but seems to be only notch, not peak (setting a generator to noise makes this visible on a Spectrum instance), with Ladder enabled the notch is hard to see (don't know why), and there is PK that seems to be "peak".
-
thecontrolcentre thecontrolcentre https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=76240 - KVRAF
- 37261 posts since 27 Jul, 2005 from Scottish Borders
Live 11.0.10b1 is out:
New features and improvements:
Stretching a MIDI note using the MIDI stretch markers in the MIDI Editor or the ÷2 and x2 buttons in the Notes tab will now cause any per-note expression belonging to that note to be stretched as well.
When adding a new note to a MIDI clip or reactivating a previously deactivated note, if the clip is playing and the playhead is within the new or deactivated note, the note will be played immediately.
When sending notes to a plug-in device, external device, or Max for Live device that has MPE Mode enabled, reoccurring notes with the same note number will now reuse the same channel. This can result in more consistent behavior of multitimbral instruments.
It is now possible to navigate to and rename the next/previous track using the "Tab"/"Shift"+"Tab" keys while renaming multiple selected tracks in the Session View. Previously, this only worked in the Arrangement View.
The splitter between Live's main window and the Help View can now be grabbed and adjusted at its full height.
When resizing the Session View, the clip slot selection will stay in view as much as possible. When the selection is off-screen, resizing the Session View does not scroll to show it.
It is now possible to solo tracks with the "S" key and arm tracks with the "C" key when take lane headers or automation lane headers are selected. Before, this was only possible when track headers were selected.
Previously, unnecessary splits might be created on an Arrangement track's main lane, when dragging the split line of adjacent highlights on a take lane. Now the behavior when resizing adjacent take lane highlights is more consistent.
Added the following improvement to the functionality of User Remote Scripts: Device Control: Up to 16 encoders can be used for controlling Device Parameters.
The Device Activator button can be controlled.
Mixer Control: An unlimited number of Tracks can be controlled.
Track Mute, Solo and Selection can be controlled.
The Crossfader and Cue/Preview Volume can be controlled.
Transport Control: Session Record, Arrangement Overdub, Metronome, Punch-In, Punch-Out, Nudge
Down, Nudge Up and Tap Tempo can be controlled.
When the transport is stopped, any hanging notes in the Wavetable device will now be stopped, as in other Live instruments.
Note names in Drum Rack pads are now displayed until no character fits at all. Standard note names are now displayed without the octave number if the full name does not fit.
Live now has improved performance in certain scenarios.
Added the following improvements: Pressing "Tab"/"Shift"+"Tab" while renaming an Arrangement clip now selects the next/previous clip on the same track or take lane.
Pressing "Shift"+"Tab" now selects the previous clip while renaming a Session clip.
When renaming a Session clip, the "Tab"/"Shift"+"Tab" keys now skips empty clips slots.
When reaching the end when navigating with the "Tab"/"Shift"+"Tab" or Arrow Up/Down keys while renaming tracks or clips in the Session or Arrangement View, the navigation now cycles to the beginning or end of the tracks or clips, similar to using "Tab"/"Shift"+"Tab" when renaming scenes.
The vertical size of take lanes on linked tracks is now synced with a take lane that is being resized by dragging. The position of the dragged lane is sustained to keep the visible resized dragged lane visible and avoid jumping.
MIDI track meters now indicate MPE per-note controller changes. The lowest dot in a meter lights up in a blue color if per-note controller changes pass that meter.
Plug-in devices that have MIDI outs and that have MPE enabled can now output MPE.
It is now possible to fold/unfold a track's additional automation lanes with the left/right arrow keys when that track's main automation lane is selected.
Added the following changes to how velocity/probability values are displayed: A MIDI note's velocity/probability values are now displayed in the respective Velocity/Chance Editor’s lane header when hovering over that note or its velocity/probability markers.
In Draw Mode, a note's velocity/probability values are displayed when hovering over the area in which the drawing action is available for that note. If any notes are selected, only those note's values can be displayed in the ruler, and hovering respects the quantization grid.
When drawing a velocity/probability ramp, the value range is displayed in the respective Velocity/Chance Editor’s lane header. If any notes are selected, only those note's values can be displayed in the ruler, however hovering does not respectsthe quantization grid.
The Freeze Trigger LED in the Spectral Time device is now visible and flashes when Retrigger mode has Sync enabled.
On Windows, if a UI element has the focus, its context menu can now be opened via the Menu key or "Shift"+"F10".
Making a selection (or multi-selection) using keyboard navigation in the Session View's scene area now works as expected.
When the Note Expression tab is open, a "Clear All Envelopes" entry in the context menu of the MIDI Note Editor and per-note expression lanes clears all expression envelopes of one or multiple selected notes.
On Windows, context menus shown when pressing "Shift"+"F10" more accurately represent what would be shown when right-clicking using the mouse.
When choosing a take lane for recording, Live now uses the first take lane that provides enough space. Before, Live used the take lane following the last take lane that did not provide enough space.
When Sets are saved with the File menu's "Save Live Set as Template..." or "Save Live Set as Default Set..." command, they are automatically self-contained in the same way as Sets that use the File Manager’s "Collect and Save" function.
Added the following changes when transposing an unwarped audio clip:
The time ruler below the waveform will change to show the accurate amount of seconds in the waveform.
The position of the Follow Action marker will change to keep in sync with the playhead and the actual beat-time of the Follow Action.
The play position is preserved, causing smooth playback of the waveform and respecting scheduled Follow Actions.
Bugfixes:
Fixed a bug where selecting or deselecting MIDI notes showed unexpected behavior or was not possible when the Note Expression tab was open and the MIDI Note Editor had Fold enabled.
Mapping the Macro Variations selector to relative MIDI controllers now works as expected. A controller that sends high-resolution pitch bend can now be mapped to the scene selector and the snapshot selector.
Fixed a bug where the per-note breakpoint editor would not be focused when clicking on an expression curve in the Pressure or Slide lanes, when the Note Expression tab was visible.
Previously, reactivating a take lane selection when Draw Mode was enabled would create a flickering effect.
Previously, the automation control chooser is empty instead of showing "None" when loading a new Set and "Show Automated Parameters Only" is chosen. Also, clicking on the automation control chooser would not select the main automation lane header when "Show Automated Parameters Only" is chosen. These bugs have been fixed.
On Push 2, the Spectral Resonator device's main bank parameter now correctly switches to Transpose when the sidechain mode is set to MIDI.
Fixed a bug where mappings in MIDI/Key Map Mode were hidden by the scene number.
Fixed an incorrect error message that appeared when trying to insert a non-audio device into an Audio Effect Rack.
Pitch Bend, Sustain, Expression, Mod Wheel, and other MIDI controllers that one would expect to reset to a default value will now do so at the beginning of clips that do not specify them. (Note: for users who intentionally use the previous behavior, this change will make their Live Sets behave differently. Therefore, the behavior is disabled by default. The behavior can be enabled by checking the "MIDI Envelope Auto-Reset" entry in the Options menu.)
Previously, trying to resize multiple selected tracks via the resize handle of the last automation lane would resize the main automation lane instead.
Previously, cropping a sample in the Sampler device would chop off the portion of the sample between the Release Loop Start and the Loop Start, if the Release Loop Mode was set to "Loop Back and Forth" and the Release Loop Start was before the Sample Start point.
Previously, exporting audio might start single-threaded rendering before switching to multi-threaded rendering after a while. This could impact render performance significantly for Live Sets that benefit from multi-threaded rendering.
The LEDs surrounding the encoders on the Novation Remote SL MkII once again provide feedback about the value of the controlled parameter.
Plug-in window titles now update when changing the name of the containing track. AU plug-in devices are now displayed as disabled if plug-in creation fails.
Previously, Live would crash when loading a one-sample length file into the Hybrid Reverb device and adjusting the Size parameter.
When the Note Expression tab is open and no note is selected, double-clicking on the Note Ruler now correctly zooms to all notes including their pitch-bend curves.
Fixed two bugs in the Arrangement View: Previously, certain elements (such as insert markers, the loop brace and fade handles) were drawn on top of the Single Track Back to Arrangement button.
Previously, the triangle icon in the Single Track Back to Arrangement button was cropped when the track was almost scrolled almost out of the visible Arrangement View. Now the triangle icon is only shown when it can be fully displayed.
In the Sample tab, typing arbitrary values into the Pitch control's Transposition/Cents field now works as expected. Dragging the Transposition/Cents slider beyond the minimum/maximum pitch also now works as expected.
Fixed an issue where a note could have per-note events behind the note end when recording a transposed MIDI clip into the Arrangement.
In order to prevent an issue with filter cutoff being reset on every note start in the TAL J-8 plug-in, the VST3 version of the plug-in is no longer loaded in MPE Mode by default. The VST2 version of the plug-in will still load in MPE Mode by default.
In the unlikely event that an extremely high amount of MPE control change messages come in, Live will no longer crash, and all notes will be stopped.
Previously, when the Note Expression tab was open, moving the mouse from an unselected expression curve to a selected expression curve could cause the highlight to become stuck.
Some Racks that only contain licensed Max for Live devices and were previously locked in certain editions of Live (such as the DS Drum Rack in Live Standard) are no longer locked.
Navigating with the Tab key once again works as expected when renaming scenes.
Fixed a bug where Follow Actions were not scheduled as expected, under certain circumstances.
Corrected the Edit menu entry text for undoing a clip color change.
Recording auto-quantization now applies to take lane clips as well as main lane clips.
Improved Live's performance when a very large amount of notes are visible in the Velocity or Chance Editor.
Fixed a crash that could occur when undoing in a Set that had previously been restored after another crash.
The Insert Time and Delete Time commands are no longer available when editing per-note expression breakpoints. Fixed a bug that could cause per-note expression to play incorrectly after a note-editing action resulted in an existing note becoming shortened.
Previously, Live's crash recovery would silently fail if the undo history contained an empty band file (e.g. after a power outage).
Fixed an issue where undoing a per-note breakpoint editor change while the breakpoint editor was not open would not redraw the expression curves.
Previously, when changing note velocities or probabilities with the Arrow Up/Down keys, Live would not show the changed value when the mouse was hovering over the respective editor.
Previously, the MIDI Editor pitch grid might jump by one pixel when folded on tracks with a Drum Rack while Highlight Scales was disabled.
The Duplicate Time command is no longer available when editing per-note expression breakpoints. Fixed a bug where the Duplicate command would truncate the original note when duplicating the selected note while working in the per-note expression breakpoint editor.
Fixed a regression that resulted in missing parameters in the Collision device.
Under certain circumstances on macOS, audio/MIDI meters, the global transport time and other parameters would stop updating while editing parts of a Live Set with the mouse or a trackpad.
Zooming Arrangement tracks via the Max for Live Application.View.zoom_view API function no longer breaks when multiple automation or take lanes are visible.
Fixed a bug that could cause a crash when repeatedly adding and removing notes from a held chord when using the Arpeggiator device with the Hold parameter active.
Previously, when clicking on a half-hidden track header to select it, Live might sometimes copy or move the track.
Previously, the Arrangement View would abruptly scroll upwards after renaming a clip in a take lane at the bottom of the view. Instead, the clip's take lane is now scrolled into view. Similarly, the clip's main lane is now scrolled into view when renaming a main lane clip, whereas before, the entire track (including take lanes and automation lanes) was scrolled into view.
Fixed a crash that occurred when freezing a track in a Live Set that contained an external MIDI instrument that was routing MIDI to a device in the Master track.
Previously, renaming did not work as expected when selecting a track header or take lane header and unselecting the cursor item using "CMD"+click (Mac) / "CTRL"+click (Win). Fixed crashes and error messages pertaining to corrupt documents that occurred when loading some Live Sets.
Fixed crashes that occurred after deleting a device while a take lane clip has an envelope for that device.
Fixed document corruption and subsequent possible crashes or other issues when restoring a Set after a crash under certain circumstances.
Fixed a bug where Live would not accept tempo changes from Link peers in some cases.
Previously, if a plugin was grouped into an Instrument or Drum Rack, the MPE settings of the plugin were not retained when the Rack was saved as a preset.
Fixed a crash that occurred when clicking on a parameter in Live and adjusting the same parameter using an encoder on Push at the same
New features and improvements:
Stretching a MIDI note using the MIDI stretch markers in the MIDI Editor or the ÷2 and x2 buttons in the Notes tab will now cause any per-note expression belonging to that note to be stretched as well.
When adding a new note to a MIDI clip or reactivating a previously deactivated note, if the clip is playing and the playhead is within the new or deactivated note, the note will be played immediately.
When sending notes to a plug-in device, external device, or Max for Live device that has MPE Mode enabled, reoccurring notes with the same note number will now reuse the same channel. This can result in more consistent behavior of multitimbral instruments.
It is now possible to navigate to and rename the next/previous track using the "Tab"/"Shift"+"Tab" keys while renaming multiple selected tracks in the Session View. Previously, this only worked in the Arrangement View.
The splitter between Live's main window and the Help View can now be grabbed and adjusted at its full height.
When resizing the Session View, the clip slot selection will stay in view as much as possible. When the selection is off-screen, resizing the Session View does not scroll to show it.
It is now possible to solo tracks with the "S" key and arm tracks with the "C" key when take lane headers or automation lane headers are selected. Before, this was only possible when track headers were selected.
Previously, unnecessary splits might be created on an Arrangement track's main lane, when dragging the split line of adjacent highlights on a take lane. Now the behavior when resizing adjacent take lane highlights is more consistent.
Added the following improvement to the functionality of User Remote Scripts: Device Control: Up to 16 encoders can be used for controlling Device Parameters.
The Device Activator button can be controlled.
Mixer Control: An unlimited number of Tracks can be controlled.
Track Mute, Solo and Selection can be controlled.
The Crossfader and Cue/Preview Volume can be controlled.
Transport Control: Session Record, Arrangement Overdub, Metronome, Punch-In, Punch-Out, Nudge
Down, Nudge Up and Tap Tempo can be controlled.
When the transport is stopped, any hanging notes in the Wavetable device will now be stopped, as in other Live instruments.
Note names in Drum Rack pads are now displayed until no character fits at all. Standard note names are now displayed without the octave number if the full name does not fit.
Live now has improved performance in certain scenarios.
Added the following improvements: Pressing "Tab"/"Shift"+"Tab" while renaming an Arrangement clip now selects the next/previous clip on the same track or take lane.
Pressing "Shift"+"Tab" now selects the previous clip while renaming a Session clip.
When renaming a Session clip, the "Tab"/"Shift"+"Tab" keys now skips empty clips slots.
When reaching the end when navigating with the "Tab"/"Shift"+"Tab" or Arrow Up/Down keys while renaming tracks or clips in the Session or Arrangement View, the navigation now cycles to the beginning or end of the tracks or clips, similar to using "Tab"/"Shift"+"Tab" when renaming scenes.
The vertical size of take lanes on linked tracks is now synced with a take lane that is being resized by dragging. The position of the dragged lane is sustained to keep the visible resized dragged lane visible and avoid jumping.
MIDI track meters now indicate MPE per-note controller changes. The lowest dot in a meter lights up in a blue color if per-note controller changes pass that meter.
Plug-in devices that have MIDI outs and that have MPE enabled can now output MPE.
It is now possible to fold/unfold a track's additional automation lanes with the left/right arrow keys when that track's main automation lane is selected.
Added the following changes to how velocity/probability values are displayed: A MIDI note's velocity/probability values are now displayed in the respective Velocity/Chance Editor’s lane header when hovering over that note or its velocity/probability markers.
In Draw Mode, a note's velocity/probability values are displayed when hovering over the area in which the drawing action is available for that note. If any notes are selected, only those note's values can be displayed in the ruler, and hovering respects the quantization grid.
When drawing a velocity/probability ramp, the value range is displayed in the respective Velocity/Chance Editor’s lane header. If any notes are selected, only those note's values can be displayed in the ruler, however hovering does not respectsthe quantization grid.
The Freeze Trigger LED in the Spectral Time device is now visible and flashes when Retrigger mode has Sync enabled.
On Windows, if a UI element has the focus, its context menu can now be opened via the Menu key or "Shift"+"F10".
Making a selection (or multi-selection) using keyboard navigation in the Session View's scene area now works as expected.
When the Note Expression tab is open, a "Clear All Envelopes" entry in the context menu of the MIDI Note Editor and per-note expression lanes clears all expression envelopes of one or multiple selected notes.
On Windows, context menus shown when pressing "Shift"+"F10" more accurately represent what would be shown when right-clicking using the mouse.
When choosing a take lane for recording, Live now uses the first take lane that provides enough space. Before, Live used the take lane following the last take lane that did not provide enough space.
When Sets are saved with the File menu's "Save Live Set as Template..." or "Save Live Set as Default Set..." command, they are automatically self-contained in the same way as Sets that use the File Manager’s "Collect and Save" function.
Added the following changes when transposing an unwarped audio clip:
The time ruler below the waveform will change to show the accurate amount of seconds in the waveform.
The position of the Follow Action marker will change to keep in sync with the playhead and the actual beat-time of the Follow Action.
The play position is preserved, causing smooth playback of the waveform and respecting scheduled Follow Actions.
Bugfixes:
Fixed a bug where selecting or deselecting MIDI notes showed unexpected behavior or was not possible when the Note Expression tab was open and the MIDI Note Editor had Fold enabled.
Mapping the Macro Variations selector to relative MIDI controllers now works as expected. A controller that sends high-resolution pitch bend can now be mapped to the scene selector and the snapshot selector.
Fixed a bug where the per-note breakpoint editor would not be focused when clicking on an expression curve in the Pressure or Slide lanes, when the Note Expression tab was visible.
Previously, reactivating a take lane selection when Draw Mode was enabled would create a flickering effect.
Previously, the automation control chooser is empty instead of showing "None" when loading a new Set and "Show Automated Parameters Only" is chosen. Also, clicking on the automation control chooser would not select the main automation lane header when "Show Automated Parameters Only" is chosen. These bugs have been fixed.
On Push 2, the Spectral Resonator device's main bank parameter now correctly switches to Transpose when the sidechain mode is set to MIDI.
Fixed a bug where mappings in MIDI/Key Map Mode were hidden by the scene number.
Fixed an incorrect error message that appeared when trying to insert a non-audio device into an Audio Effect Rack.
Pitch Bend, Sustain, Expression, Mod Wheel, and other MIDI controllers that one would expect to reset to a default value will now do so at the beginning of clips that do not specify them. (Note: for users who intentionally use the previous behavior, this change will make their Live Sets behave differently. Therefore, the behavior is disabled by default. The behavior can be enabled by checking the "MIDI Envelope Auto-Reset" entry in the Options menu.)
Previously, trying to resize multiple selected tracks via the resize handle of the last automation lane would resize the main automation lane instead.
Previously, cropping a sample in the Sampler device would chop off the portion of the sample between the Release Loop Start and the Loop Start, if the Release Loop Mode was set to "Loop Back and Forth" and the Release Loop Start was before the Sample Start point.
Previously, exporting audio might start single-threaded rendering before switching to multi-threaded rendering after a while. This could impact render performance significantly for Live Sets that benefit from multi-threaded rendering.
The LEDs surrounding the encoders on the Novation Remote SL MkII once again provide feedback about the value of the controlled parameter.
Plug-in window titles now update when changing the name of the containing track. AU plug-in devices are now displayed as disabled if plug-in creation fails.
Previously, Live would crash when loading a one-sample length file into the Hybrid Reverb device and adjusting the Size parameter.
When the Note Expression tab is open and no note is selected, double-clicking on the Note Ruler now correctly zooms to all notes including their pitch-bend curves.
Fixed two bugs in the Arrangement View: Previously, certain elements (such as insert markers, the loop brace and fade handles) were drawn on top of the Single Track Back to Arrangement button.
Previously, the triangle icon in the Single Track Back to Arrangement button was cropped when the track was almost scrolled almost out of the visible Arrangement View. Now the triangle icon is only shown when it can be fully displayed.
In the Sample tab, typing arbitrary values into the Pitch control's Transposition/Cents field now works as expected. Dragging the Transposition/Cents slider beyond the minimum/maximum pitch also now works as expected.
Fixed an issue where a note could have per-note events behind the note end when recording a transposed MIDI clip into the Arrangement.
In order to prevent an issue with filter cutoff being reset on every note start in the TAL J-8 plug-in, the VST3 version of the plug-in is no longer loaded in MPE Mode by default. The VST2 version of the plug-in will still load in MPE Mode by default.
In the unlikely event that an extremely high amount of MPE control change messages come in, Live will no longer crash, and all notes will be stopped.
Previously, when the Note Expression tab was open, moving the mouse from an unselected expression curve to a selected expression curve could cause the highlight to become stuck.
Some Racks that only contain licensed Max for Live devices and were previously locked in certain editions of Live (such as the DS Drum Rack in Live Standard) are no longer locked.
Navigating with the Tab key once again works as expected when renaming scenes.
Fixed a bug where Follow Actions were not scheduled as expected, under certain circumstances.
Corrected the Edit menu entry text for undoing a clip color change.
Recording auto-quantization now applies to take lane clips as well as main lane clips.
Improved Live's performance when a very large amount of notes are visible in the Velocity or Chance Editor.
Fixed a crash that could occur when undoing in a Set that had previously been restored after another crash.
The Insert Time and Delete Time commands are no longer available when editing per-note expression breakpoints. Fixed a bug that could cause per-note expression to play incorrectly after a note-editing action resulted in an existing note becoming shortened.
Previously, Live's crash recovery would silently fail if the undo history contained an empty band file (e.g. after a power outage).
Fixed an issue where undoing a per-note breakpoint editor change while the breakpoint editor was not open would not redraw the expression curves.
Previously, when changing note velocities or probabilities with the Arrow Up/Down keys, Live would not show the changed value when the mouse was hovering over the respective editor.
Previously, the MIDI Editor pitch grid might jump by one pixel when folded on tracks with a Drum Rack while Highlight Scales was disabled.
The Duplicate Time command is no longer available when editing per-note expression breakpoints. Fixed a bug where the Duplicate command would truncate the original note when duplicating the selected note while working in the per-note expression breakpoint editor.
Fixed a regression that resulted in missing parameters in the Collision device.
Under certain circumstances on macOS, audio/MIDI meters, the global transport time and other parameters would stop updating while editing parts of a Live Set with the mouse or a trackpad.
Zooming Arrangement tracks via the Max for Live Application.View.zoom_view API function no longer breaks when multiple automation or take lanes are visible.
Fixed a bug that could cause a crash when repeatedly adding and removing notes from a held chord when using the Arpeggiator device with the Hold parameter active.
Previously, when clicking on a half-hidden track header to select it, Live might sometimes copy or move the track.
Previously, the Arrangement View would abruptly scroll upwards after renaming a clip in a take lane at the bottom of the view. Instead, the clip's take lane is now scrolled into view. Similarly, the clip's main lane is now scrolled into view when renaming a main lane clip, whereas before, the entire track (including take lanes and automation lanes) was scrolled into view.
Fixed a crash that occurred when freezing a track in a Live Set that contained an external MIDI instrument that was routing MIDI to a device in the Master track.
Previously, renaming did not work as expected when selecting a track header or take lane header and unselecting the cursor item using "CMD"+click (Mac) / "CTRL"+click (Win). Fixed crashes and error messages pertaining to corrupt documents that occurred when loading some Live Sets.
Fixed crashes that occurred after deleting a device while a take lane clip has an envelope for that device.
Fixed document corruption and subsequent possible crashes or other issues when restoring a Set after a crash under certain circumstances.
Fixed a bug where Live would not accept tempo changes from Link peers in some cases.
Previously, if a plugin was grouped into an Instrument or Drum Rack, the MPE settings of the plugin were not retained when the Rack was saved as a preset.
Fixed a crash that occurred when clicking on a parameter in Live and adjusting the same parameter using an encoder on Push at the same
-
- Banned
- 11467 posts since 4 Jan, 2017 from Warsaw, Poland
How about you post a link, if you don't plan to format it properly?
https://www.ableton.com/de/release-notes/live-11-beta/
-
WatchTheGuitar WatchTheGuitar https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=440193 - KVRAF
- 13256 posts since 30 Apr, 2019
-
- KVRAF
- 2294 posts since 23 May, 2012 from London
No and very little from Ableton HQ about a possible release or roadmap, even in the beta forum. Just sit by the phone and wait I'm afraid.
Always Read the Manual!
-
- KVRAF
- 12082 posts since 2 Dec, 2004 from North Wales
hey are waiting for the M1X to come out 
X32 Desk, i9 PC, S88MK3, S1, BWS, Live + PUSH 3, Osmose, RedShift 6 Pro3, Tempera, Syntakt, Digitone II, OP1-F, OPXY, Eurorack, TD27 Drums, Guitars, Basses, Amps and of course lots of pedals!
-
- Banned
- 11467 posts since 4 Jan, 2017 from Warsaw, Poland
Apparently M1X is also necessary to handle an icon signifying which tracks contain takes
-
- KVRAF
- 12082 posts since 2 Dec, 2004 from North Wales
Yeh, I must admit I was expecting to see that in this next beta!
X32 Desk, i9 PC, S88MK3, S1, BWS, Live + PUSH 3, Osmose, RedShift 6 Pro3, Tempera, Syntakt, Digitone II, OP1-F, OPXY, Eurorack, TD27 Drums, Guitars, Basses, Amps and of course lots of pedals!
-
thecontrolcentre thecontrolcentre https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=76240
- KVRAF
- 37261 posts since 27 Jul, 2005 from Scottish Borders
Phew. Lucky you were hereantic604 wrote: Tue Aug 10, 2021 12:06 pmHow about you post a link, if you don't plan to format it properly?
https://www.ableton.com/de/release-notes/live-11-beta/
-
thecontrolcentre thecontrolcentre https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=76240
- KVRAF
- 37261 posts since 27 Jul, 2005 from Scottish Borders
-
- Banned
- 11467 posts since 4 Jan, 2017 from Warsaw, Poland
I know, right?thecontrolcentre wrote: Tue Aug 10, 2021 7:14 pmPhew. Lucky you were hereantic604 wrote: Tue Aug 10, 2021 12:06 pmHow about you post a link, if you don't plan to format it properly?
https://www.ableton.com/de/release-notes/live-11-beta/
-
- KVRAF
- Topic Starter
- 1550 posts since 25 Sep, 2011
Well, I'll stay in Logic Pro world in the meantime. I won't give up these awesome M1 machines. But can't wait to return to Ableton Live. Nothing else comes close to me.
I hope Ableton is at least working on the native Apple silicon version as we speak.
Last edited by Yorrrrrr on Tue Aug 10, 2021 9:54 pm, edited 1 time in total.
-
- KVRAF
- 26930 posts since 3 Feb, 2005 from in the wilds
I'm sure Ableton is working on it... obviously they are not going to drop the Mac platform. But since the also have Max/M4L to port as well as Live, I imagine it is complicated.Yorrrrrr wrote: Tue Aug 10, 2021 9:15 pmWell, Logic Pro it is in the meantime. Won't give up these awesome M1 machines. But can't wait to return to Ableton Live. Nothing else comes close to me.
I hope Ableton is at least working on the native Apple silicon version as we speak.
