Free Zebra2/HZ skin: Wombat Flat (Skin Builder 1.1 final and pre-built skins released)
-
- KVRian
- 1421 posts since 14 Apr, 2008 from velvet noise
/* whitenoise */
Last edited by noiseresearch on Sun Nov 29, 2020 3:38 pm, edited 1 time in total.
It refuses description, allowing only the vague approach of adjectives: dark, light, raw, angelic. Who or what is making these noises? Where are they coming from and what do they point to? What kind of entity can leave such a troubling sonic remnant?
-
- KVRist
- Topic Starter
- 170 posts since 19 Apr, 2020
@resistent: I'll send the fix tomorrow. I handled it one way but I have an idea for another (better) way I'd like to test first.
Also, no v1.1beta 3 update tonight. It needs a little more time in the oven. Should be tomorrow
Also, no v1.1beta 3 update tonight. It needs a little more time in the oven. Should be tomorrow
-
- KVRist
- Topic Starter
- 170 posts since 19 Apr, 2020
All:
Here is 1.1 beta 3 of the Skin Builder!: https://www.dropbox.com/s/esqsbxvgjdie3 ... 3.zip?dl=0
Notable changes include:
Presets, allowing you to save, share, load and customize skin settings. The way this works is that when you load a preset file, all defaults are set to those in the preset file (such that generating a skin from the preset is as easy as hitting Enter a bunch of times). This allows you to customize settings based on a preset easily. I have included a smattering of presets for fun.
Please note that while I'll do my best to keep the preset format stable between versions (so that new versions are backwards compatible with old presets), and I have build in some features to help me do that, I can't make promises.
Global image adjustments, such as contrast and brightness. While the default skin has a pretty good medium contrast, some may prefer higher or lower contrast skins and this allows that. The global hue and saturation adjustments can be helpful if wanting to make broad adjustments to all colors easily.
Tab colors optionally follow the Selection Color rather than the section color.
Miscellaneous. Small alignment, color and graphic fixes. Most of resistent's fixes are now included.
Screenshots of the current presets are attached. These are in addition to the default blue and colorized versions, which are essentially untouched. Have fun!
Here is 1.1 beta 3 of the Skin Builder!: https://www.dropbox.com/s/esqsbxvgjdie3 ... 3.zip?dl=0
Notable changes include:
Presets, allowing you to save, share, load and customize skin settings. The way this works is that when you load a preset file, all defaults are set to those in the preset file (such that generating a skin from the preset is as easy as hitting Enter a bunch of times). This allows you to customize settings based on a preset easily. I have included a smattering of presets for fun.
Please note that while I'll do my best to keep the preset format stable between versions (so that new versions are backwards compatible with old presets), and I have build in some features to help me do that, I can't make promises.
Global image adjustments, such as contrast and brightness. While the default skin has a pretty good medium contrast, some may prefer higher or lower contrast skins and this allows that. The global hue and saturation adjustments can be helpful if wanting to make broad adjustments to all colors easily.
Tab colors optionally follow the Selection Color rather than the section color.
Miscellaneous. Small alignment, color and graphic fixes. Most of resistent's fixes are now included.
Screenshots of the current presets are attached. These are in addition to the default blue and colorized versions, which are essentially untouched. Have fun!
You do not have the required permissions to view the files attached to this post.
-
- KVRAF
- 7032 posts since 28 Apr, 2004 from france
-
- KVRist
- Topic Starter
- 170 posts since 19 Apr, 2020
Apologies for the rapid update, but Skin Builder 1.1 beta 4 is released here: https://www.dropbox.com/s/udgulycjhc8px ... 4.zip?dl=0
The only difference from 1.1 beta 3 is that this includes an advanced processing option that allows for passing extra flags to the image processor (see the full list here: https://imagemagick.org/script/command-line-options.php). The most obvious initial use is to apply an overall tint to the image, causing the pure grays present in prior versions to become slightly colored. For example, adding "-fill yellow -colorize 2" adds a slight yellow tint to the images.
Presets made with 1.1 beta 3 are compatible with beta 4, but will not have any additional processing options included. The Sunshine and Seabreeze presets have been updated to provide an overall tint (yellow and blue, respectively). Screenshots of the changed presets are attached.
The only difference from 1.1 beta 3 is that this includes an advanced processing option that allows for passing extra flags to the image processor (see the full list here: https://imagemagick.org/script/command-line-options.php). The most obvious initial use is to apply an overall tint to the image, causing the pure grays present in prior versions to become slightly colored. For example, adding "-fill yellow -colorize 2" adds a slight yellow tint to the images.
Presets made with 1.1 beta 3 are compatible with beta 4, but will not have any additional processing options included. The Sunshine and Seabreeze presets have been updated to provide an overall tint (yellow and blue, respectively). Screenshots of the changed presets are attached.
You do not have the required permissions to view the files attached to this post.
-
- KVRAF
- 19813 posts since 16 Sep, 2001 from Las Vegas,USA
Cool thanks for the latest version! Off to try it now.... 
None are so hopelessly enslaved as those who falsely believe they are free. Johann Wolfgang von Goethe
-
- KVRAF
- 1524 posts since 29 Oct, 2015 from Jupiter 8
Sorry, haven't read every page, but somebody mentioned Zebrify before.
So, does this also work with Zebrify?
So, does this also work with Zebrify?
The GAS is always greener on the other side!
-
- KVRist
- Topic Starter
- 170 posts since 19 Apr, 2020
Not yet, but it will! I’ve tried seeing what happens if I bolt the skin as is into Zebrify and it sort of worked. Problem is I’ve never actually Zebrify much so I need wrap my head around now it works before I start the project in earnest. My plan is to release 1.1 in the next few days and then start ZebrifyFapFilter wrote: Wed Oct 07, 2020 10:43 pm Sorry, haven't read every page, but somebody mentioned Zebrify before.
So, does this also work with Zebrify?
-
- KVRist
- Topic Starter
- 170 posts since 19 Apr, 2020
FYI, I’m tracking down a weird bug that seems to cause presets not to load/save correctly when using specific sidebar brightness settings. This seems to stop the White Dust preset from loading correct values. Will try to figure it out tomorrow and post a new version.
-
- KVRian
- 1421 posts since 14 Apr, 2008 from velvet noise
/* whitenoise */
Last edited by noiseresearch on Sun Nov 29, 2020 3:38 pm, edited 1 time in total.
It refuses description, allowing only the vague approach of adjectives: dark, light, raw, angelic. Who or what is making these noises? Where are they coming from and what do they point to? What kind of entity can leave such a troubling sonic remnant?
-
- KVRist
- Topic Starter
- 170 posts since 19 Apr, 2020
Regarding the keyfollow, that is extremely strange because I know I fixed it yet it somehow reverted. I must have had a version control issue at some point. In any event it is definitely fixed now.
The easiest way to solve is to search for 'Label 3691' then paste in the following after that section:
CONTROL type='Label' name='Label 3692' bounds='146.00 151.00 40.00 12.00' parent='Pane 3673' layerMask='7fffffff'
PROPERTY control='Label 3692' name='colours' id='0' value='none'
PROPERTY control='Label 3692' name='colours' id='1' value='Light Gray'
PROPERTY control='Label 3692' name='graphics' id='0' value='none'
PROPERTY control='Label 3692' name='labeltext' id='0' value='KEY FOL'
Then search for 'Label 3712' and paste in the following after the section
CONTROL type='Label' name='Label 3713' bounds='142.00 151.00 40.00 12.00' parent='Pane 3694' layerMask='7fffffff'
PROPERTY control='Label 3713' name='colours' id='0' value='none'
PROPERTY control='Label 3713' name='colours' id='1' value='Light Gray'
PROPERTY control='Label 3713' name='graphics' id='0' value='none'
PROPERTY control='Label 3713' name='labeltext' id='0' value='KEY FOL'
I'll look into the XCF issue
The easiest way to solve is to search for 'Label 3691' then paste in the following after that section:
CONTROL type='Label' name='Label 3692' bounds='146.00 151.00 40.00 12.00' parent='Pane 3673' layerMask='7fffffff'
PROPERTY control='Label 3692' name='colours' id='0' value='none'
PROPERTY control='Label 3692' name='colours' id='1' value='Light Gray'
PROPERTY control='Label 3692' name='graphics' id='0' value='none'
PROPERTY control='Label 3692' name='labeltext' id='0' value='KEY FOL'
Then search for 'Label 3712' and paste in the following after the section
CONTROL type='Label' name='Label 3713' bounds='142.00 151.00 40.00 12.00' parent='Pane 3694' layerMask='7fffffff'
PROPERTY control='Label 3713' name='colours' id='0' value='none'
PROPERTY control='Label 3713' name='colours' id='1' value='Light Gray'
PROPERTY control='Label 3713' name='graphics' id='0' value='none'
PROPERTY control='Label 3713' name='labeltext' id='0' value='KEY FOL'
I'll look into the XCF issue
-
- KVRist
- Topic Starter
- 170 posts since 19 Apr, 2020
Can you clarify what you are referring to? As far as I can tell, the XMF driver and overload namings are consistent. On the upper pane the driver is specifically labeled DRIVER and the overload is labeled OVER, whereas on the lower pane the driver is the little unlabeled box below the second filter display and the overload is labeled OVER. This is also the way it is in the default ZHZ skin. See screenshot.resistent wrote: Thu Oct 08, 2020 8:04 amThe "xmf" overload naming is not coherent. It is calles "driver" and "over" (upper/lower pane).
I may be misunderstanding your concern however. FYI, once I address this, I'll be ready to upload a beta 5 that fixes the preset issue, the KEY FOL issue, and a few other nits.
You do not have the required permissions to view the files attached to this post.
-
- KVRian
- 1421 posts since 14 Apr, 2008 from velvet noise
/* whitenoise */
Last edited by noiseresearch on Mon Nov 30, 2020 9:49 am, edited 1 time in total.
It refuses description, allowing only the vague approach of adjectives: dark, light, raw, angelic. Who or what is making these noises? Where are they coming from and what do they point to? What kind of entity can leave such a troubling sonic remnant?
-
- KVRian
- 1421 posts since 14 Apr, 2008 from velvet noise
/* whitenoise */
Last edited by noiseresearch on Mon Nov 30, 2020 9:49 am, edited 1 time in total.
It refuses description, allowing only the vague approach of adjectives: dark, light, raw, angelic. Who or what is making these noises? Where are they coming from and what do they point to? What kind of entity can leave such a troubling sonic remnant?