KVR Audio

TS-12 · Post by **TS-12** » Sat Dec 28, 2019 3:19 am

only bummer that it can’t be used as insert / send effect on a track. I really like triton’s st.chorus, enhancer - exciter effects.
(Korg MDE-X vst doesn’t have all the effects of Korg triton unfortunately)

trusampler · Post by **trusampler** » Sat Dec 28, 2019 3:24 am

OP, might wanna change the thread to Korg Triton released!

glokraw · Post by **glokraw** » Sat Dec 28, 2019 3:57 am

Forgotten wrote: Fri Dec 27, 2019 4:17 am Hate to sound cynical, but they send canned responses for a lot of customer support issues...

Hopefully this is an exception and they are addressing the issue.

You're assuming there is a "they". With support staff layoffs,
and AI bots on the rise, we're lucky to have a real human
he or she, let alone a pair or group of humans forming a "they'

How a company can make such fine products, while putting forth
a consistantly flawed internet presence, is a great mystery.
There accounts department has been

for years.
I feel lucky to have gotten the M1 plugin registerd at all

Cheers

oxygenmask · Post by **oxygenmask** » Sat Dec 28, 2019 5:27 am

I submitted a ticket because I purchased Triton last night, but I haven't received my download code email. I have also not received a response to my ticket. I noticed that they will be closed from tomorrow until 1/6. I am quite sure after waiting 9 days to simply download and install my $200 product, I will not be in a good mood.

glokraw · Post by **glokraw** » Sat Dec 28, 2019 7:22 am

Must be Tuna season near where the tech support are located

But Tuna are very cool and tasty, and might sell well by the pound.

...customers...well, don't be

pretty sure they closed like that
in the last few years, also.
Cheers

SLiC · Post by **SLiC** » Sat Dec 28, 2019 8:51 am

oxygenmask wrote: Sat Dec 28, 2019 5:27 am I submitted a ticket because I purchased Triton last night, but I haven't received my download code email. I have also not received a response to my ticket. I noticed that they will be closed from tomorrow until 1/6. I am quite sure after waiting 9 days to simply download and install my $200 product, I will not be in a good mood.

It was a strange time to release a brand new flagship synth...that said, the demo is generous and I have enjoyed playing with it over the holidays.

mladi · Post by **mladi** » Sat Dec 28, 2019 8:54 am

wagtunes wrote: Sat Dec 28, 2019 2:25 am The original KLC cost me $100 (MS 20, Poly, M1, Wavestation)

So $149 for, what for me would be the Odyssey and Triton, is a little steep.

It's more for you: $199 for KLC owners and $149 for Special Bundle owners (means you already paid the $49.99 for the upgrade to get Odyssey in the past).

fmr · Post by **fmr** » Sat Dec 28, 2019 9:58 am

SaganTech wrote: Sat Dec 28, 2019 2:17 am
fmr wrote: Fri Dec 27, 2019 9:37 pmwhich means I should be able to use Bank and Program Change messages to call sounds.

Apparently, this isn't working. I can't find a way to get Triton to recognice CC 00 and/or CC 32 to change banks. No matter what I do, any Program Change recalls a sound from the first Bank. I downloaded the manual, and Triton Extreme was able to recognize Bank messages. Anyone knows what is the method to recall sounds via MIDI messages in this thing?
Yes, so I tried this and apparently, from trial and error, I was able to determine that they do indeed work but the bank change assignments have been changed. Banks 0-3 are recalled using controller 0 = 0 and controller 32 = 0-3. The recall only happens after a program change, following standard MIDI protocols. This works in combi and program modes. It also looks the the extra content can be recalled starting at bank (ctrl 32) = 8.

Nope... Doesn't work for me. I am using Cubase 10.5 in Windows. I tried what you said, with Program Change before and after the CC messages (supposedly it should always come after not before, anyway). I even changed the values (exchanged CC 0 and CC 32 values) in case you made some mistake. Nothing worked. It always recall the program from Factory Bank A.

Aloysius · Post by **Aloysius** » Sat Dec 28, 2019 9:59 am

Yet another cubase problem?

fmr · Post by **fmr** » Sat Dec 28, 2019 10:04 am

oxygenmask wrote: Sat Dec 28, 2019 5:27 am I submitted a ticket because I purchased Triton last night, but I haven't received my download code email. I have also not received a response to my ticket. I noticed that they will be closed from tomorrow until 1/6. I am quite sure after waiting 9 days to simply download and install my $200 product, I will not be in a good mood.

Where did you submitted the ticket? I want to report what seems to be a bug in the Windows version, regarding Bank and Program Change

fmr · Post by **fmr** » Sat Dec 28, 2019 10:05 am

Aloysius wrote: Sat Dec 28, 2019 9:59 am Yet another cubase problem?

I don't think so. Cubase works OK with everything else else. Bu I will try with other hosts, nevertheless.

EDIT: Tried in REAPER and in Digital Performer, and no luck. It doesn't answer to Bank controllers, only to Program Change messages, but that only recalls programs from Factory Bank A

Aloysius · Post by **Aloysius** » Sat Dec 28, 2019 10:15 am

EvilDragon · Post by **EvilDragon** » Sat Dec 28, 2019 11:42 am

Bank Select/Program Changes work fine over here in Reaper. MSB (CC #0) has to be 0, LSB (CC #32) is 0-3 for factory banks A-D, and 8-16 for EXBs. Tried both using ReaControlMIDI and entering MIDI events in piano roll manually.

EDIT: Also works just fine in Live, FL20, S1, Maschine.

Make sure that Enable Combi/Prog Change is checked (manual has things the other way around) under MIDI Filter section in Global, then Save As Default.

raymondwave · Post by **raymondwave** » Sat Dec 28, 2019 12:20 pm

I can’t remember how it is with hardware, but with the plugin you can’t edit individual drum notes, but you can set the panning for all notes or according to drumkit preset. This is different and less than M1. For me it’s better as I mostly need to set pan to zero for bouncing hihats etc, no need to dig individual notes separately.

Slightly bummed by filter cutoff and resonance being one combined control, but luckily resonance can be automated separately, just needs to be dug up from menu.

fmr · Post by **fmr** » Sat Dec 28, 2019 12:52 pm

EvilDragon wrote: Sat Dec 28, 2019 11:42 am Bank Select/Program Changes work fine over here in Reaper. MSB (CC #0) has to be 0, LSB (CC #32) is 0-3 for factory banks A-D, and 8-16 for EXBs. Tried both using ReaControlMIDI and entering MIDI events in piano roll manually.

EDIT: Also works just fine in Live, FL20, S1, Maschine.

Make sure that Enable Combi/Prog Change is checked (manual has things the other way around) under MIDI Filter section in Global, then Save As Default.

I must be especially dumb now, then...

Are you in Windows 7? Can you send me a REAPER file with just the CC messages and program change that worked with you for me to test?

And yes, I figured the manual has instructions wrong (and no explanation whatsoever about how to achieve program changes with MIDI)

Korg releases Korg Triton VST