Arturia V Collection 9 - Official Thread

[Biome_Digital]

Hey guys, loads of my new presets are included with V9. Aug strings and voices, ms20, prophet 5. Search New Loops in the browsers. Hope you like!

Already liking them with the taster that's available in Analog Lab V. Excellent job and thank you!

Great thanks !!

[OllieBoi]

Has anyone noticed on the new Prophet-5 V, the filter key tracking is a simple on/off switch? I realize this matches the original Prophet 5 design. But come on, Arturia could have just as easily included a continuously variable key tracking knob in place of the switch.

Now on practically every patch I have to open the Advanced section, select the Keyboard modulators and set up a Keyboard to Filter Cutoff modulation routing so the upper range of the keyboard isn’t too bright or too dull. What a pain.

If Arturia insist on sticking to the original Prophet 5 design, then why have they put an arpeggiator on the front panel of the interface? That’s not on the original.

While they are fixing the key tracking issue, Arturia might want to put filter and amp envelope velocity sensitivity control knobs on the front panel as well. Don’t make me go into the mod matrix to set up something so basic. Even u-he’s Repro has front panel velocity trimmers for the filter and amp envelopes.

[Biome_Digital]

Has anyone noticed on the new Prophet-5 V, the filter key tracking is a simple on/off switch? I realize this matches the original Prophet 5 design. But come on, Arturia could have just as easily included a continuously variable key tracking knob in place of the switch.

Now on practically every patch I have to open the Advanced section, select the Keyboard modulators and set up a Keyboard to Filter Cutoff modulation routing so the upper range of the keyboard isn’t too bright or too dull. What a pain.

If Arturia insist on sticking to the original Prophet 5 design, then why have they put an arpeggiator on the front panel of the interface? That’s not on the original.

While they are fixing the key tracking issue, Arturia might want to put filter and amp envelope velocity sensitivity control knobs on the front panel as well. Don’t make me go into the mod matrix to set up something so basic. Even u-he’s Repro has front panel velocity trimmers for the filter and amp envelopes.

Isn't there keytracking in the advanced section?

[wwjd]

so now in Analog Lab, I can't open the older CS-80 that I do already own. neat.
(I don't care enough to report it)

It does still load the old one if on your system, I tried it with some of the Synthopoedia patches for the old version

Yes, same here - wwjd just make sure "Include Legacy Sounds" is checked in the top left hand corner menu of Analog Lab.

cool, thanks for that. didn' know about it.

[nirm123]

Finally, Analog software emulation sounds as good as the hardware, amazing work Arturia !!!

[Niowiad]

I just don't understand why they wanted that nice GUI to turns piss-yellow to highlight parameter values.
The knobs with the thick white line were already doing their job very well.

[bmanic]

Finally, Analog software emulation sounds as good as the hardware, amazing work Arturia !!!

Are you being sarcastic..? Very hard to tell.

[nirm123]

not trying to put anyone down but yes, I felt as though Korg ms-20 plugin and Cherry Audio ps-20 came close, but didn't sound as good as the hardware. Did you think they sounded as good as the HW ? I mean, they were close, but not quite there, so this is the first time I hear such a great sounding MS-20 in software, which is very impressive !!!

[ReleaseCandidate]

Why can't someone make an awesome polyphonic aftertouch keyboard with a ribbon?

There is a rumor of a poly AT controller by Behringer, they finished a poly AT key-bed 3 years ago.
https://ask.audio/articles/behringers-f ... nth-clones

And I love my Hydrasynth Explorer even without the ribbon.

[jamcat]

The name change is unfortunate though. What happens when you try to open a project that was using "OB-Xa V"? Probably "plugin not found", in which case you can replace it with the new version, hope you can remember what patch was loaded (probably not), and if you tweaked it in any way (definitely not).

As long as the internal plugin ID didn't change, the plugin's name or filename shouldn't matter.

And it looks like jamcat confirmed it's using the same plugin ID; presets remembered and everything.

I'm not sure if that's how it works in all DAWs. I remember Arturia changed the name of their PRE-amps once and Ableton Live didn't find the old one used in an old project of mine.
Had to search for my VST backup and put the old .dll in there to load it again. I'm not sure if they changed Ids back then, but I believe not. Names of VSTs shouldn't be changed, and if, leave a legacy .dll for old projects.

As I explained a few posts prior, this is because you were using VST2 versions, which are vastly inferior to VST3.

[Niowiad]

Why can't someone make an awesome polyphonic aftertouch keyboard with a ribbon?

There is a rumor of a poly AT controller by Behringer, they finished a poly AT key-bed 3 years ago.
https://ask.audio/articles/behringers-f ... nth-clones

And I love my Hydrasynth Explorer even without the ribbon.

Few days ago they actually presented a design prototype for a 61-key midi controller, asking the userbase for feedback.
Estimated price $199.

https://www.facebook.com/Behringer/phot ... 4473088914

[jamcat]

I’m no fan of Behringer because of their blatant plagiarism, but this controller actually appears to be an innovative original design. I might even have to get one for $199, if it ever actually materializes.

[OrionAlpha101]

Why can the prophetVS not import sysex banks?
This is a very important part of an emulation!

[OllieBoi]

Has anyone noticed on the new Prophet-5 V, the filter key tracking is a simple on/off switch? I realize this matches the original Prophet 5 design. But come on, Arturia could have just as easily included a continuously variable key tracking knob in place of the switch.

Now on practically every patch I have to open the Advanced section, select the Keyboard modulators and set up a Keyboard to Filter Cutoff modulation routing so the upper range of the keyboard isn’t too bright or too dull. What a pain.

If Arturia insist on sticking to the original Prophet 5 design, then why have they put an arpeggiator on the front panel of the interface? That’s not on the original.

While they are fixing the key tracking issue, Arturia might want to put filter and amp envelope velocity sensitivity control knobs on the front panel as well. Don’t make me go into the mod matrix to set up something so basic. Even u-he’s Repro has front panel velocity trimmers for the filter and amp envelopes.

Isn't there keytracking in the advanced section?

Yes, but that’s my whole point. You shouldn’t have to go into the mod matrix and set up a keyboard to filter cutoff mod routing if only Arturia had done the smart thing and included a filter key tracking knob rather than an on/off switch.

[Zipede]

I just don't understand why they wanted that nice GUI to turns piss-yellow to highlight parameter values.
The knobs with the thick white line were already doing their job very well.

If you double-click on the bottom right hand screw, next to the Korg logo, you can change the font to any colour you want.