KVR Audio

runagate · Post by **runagate** » Wed Jul 19, 2006 7:07 pm

grymmjack wrote:oh one tweak i did, long ago was set the machine up to give more timeslices to background services (since asio driver is a background service) -- doubt that is the reason though.

good luck fl is great, hope you get it working.

Even if that doesn't help it really helps audio processing of any sort to use a freeware app that does basically this...

Can't recall the name, I think it's from Sysinfo.com I'll try to track it down. Something about managing bus queues or the like.

What was your method, Grymm?

Ildon · Post by **Ildon** » Wed Jul 19, 2006 7:27 pm

grymmjack wrote:well no i dont think your disk is dying. what happens when you adjust your sample buffer length to something less severe -- try say 1024 or 512? you may need to exit flstudio, adjust in your asio control these buffers, then restart flstudio. (i have to do this as my delta wont let anything adjust this value while the asio is open)...

Nothing happens. I said that already. Changing the buffer size doesn't help one bit unfortunately. Also, yesterday and the day before (whenever I released Journeys, too) I used my Hyper Canvas and it worked fine (VSTs still had that volume problem, but DXis were okay,) and it exported perfectly fine.

voxengo recorder is free, as is tobybears recorder(prefer that over voxengos) and tapeit 1 is free too i think, or has a demo of tapeit2 (tapeit is the best imo). anyway, try that stuff. i've seen on looptalk threads where gol was telling people 'you expect flstudio to perform with a (3ms 137sample buffer)' (your values or whatever here) ... so it may be worth it to try?

Oh, cool! I'll look for Voxengo recorder. What exacly do I need to do with it?

Ildon · Post by **Ildon** » Wed Jul 19, 2006 7:36 pm

Hey, I used Voxengo recorder, and it recorded fine. Everything's in time. What does that mean?

Not sure if I should post a demo or not... everything's perfect when I use it.

grymmjack · Post by **grymmjack** » Wed Jul 19, 2006 7:53 pm

runagate wrote:
grymmjack wrote:oh one tweak i did, long ago was set the machine up to give more timeslices to background services (since asio driver is a background service) -- doubt that is the reason though.

good luck fl is great, hope you get it working.
Even if that doesn't help it really helps audio processing of any sort to use a freeware app that does basically this...

Can't recall the name, I think it's from Sysinfo.com I'll try to track it down. Something about managing bus queues or the like.

What was your method, Grymm?

win+pause/break | advanced | performance: settings | advanced | processor scheduling: background services.

the m$ way. there is another way?

Jason Brian Merrill · Post by **Jason Brian Merrill** » Wed Jul 19, 2006 7:54 pm

there is a registry entry or somethign that you can really tweak more for that...

grymmjack · Post by **grymmjack** » Wed Jul 19, 2006 7:57 pm

Ildon wrote:Hey, I used Voxengo recorder, and it recorded fine. Everything's in time. What does that mean?

Not sure if I should post a demo or not... everything's perfect when I use it.

well, it means that the problem you are encountering is relevant only to the export stuff going on in fl, and isn't general to your sound card, or other hardware outside of rendering process.

so you have one work around; use the recorder instead of render, this is horrible work around, but could be ok for a short while until imageline helps you further?

gol just posted in another thread here. his handle on kvr is tonytonychopper.. PM him perhaps? might be still around on his computer putzing about on KVR?

grymmjack · Post by **grymmjack** » Wed Jul 19, 2006 7:59 pm

Jason Brian Merrill wrote:there is a registry entry or somethign that you can really tweak more for that...

jbm, do you know it offhand? interested..

riley4reason · Post by **riley4reason** » Wed Jul 19, 2006 7:59 pm

Ildon wrote:Okay, I've been fiddling around with the demo of FLStudio 6 for a while now. Recently I thought... well... I'll buy it in a few days as my birthday

Happy Birthday! I'm not technical enough to help much but if you decide to buy it, you can save 10% by using my affiliate link.

http://www.flstudio.com/promo.asp?p=HJFFGJ431

Enjoy! Riley

Ildon · Post by **Ildon** » Wed Jul 19, 2006 8:00 pm

grymmjack wrote:
Ildon wrote:Hey, I used Voxengo recorder, and it recorded fine. Everything's in time. What does that mean?

Not sure if I should post a demo or not... everything's perfect when I use it.
well, it means that the problem you are encountering is relevant only to the export stuff going on in fl, and isn't general to your sound card, or other hardware outside of rendering process.

Oh, thank god.

so you have one work around; use the recorder instead of render, this is horrible work around, but could be ok for a short while until imageline helps you further?

Yep! That's a pain in the ass, but it's something at least. Thanks for all the help, I really appreciate it.

gol just posted in another thread here. his handle on kvr is tonytonychopper.. PM him perhaps? might be still around on his computer putzing about on KVR?

Cool! Will do. I'll link him to this thread.

Ildon · Post by **Ildon** » Wed Jul 19, 2006 8:00 pm

riley4reason wrote:
Ildon wrote:Okay, I've been fiddling around with the demo of FLStudio 6 for a while now. Recently I thought... well... I'll buy it in a few days as my birthday
Happy Birthday! I'm not technical enough to help much but if you decide to buy it, you can save 10% by using my affiliate link.
http://www.flstudio.com/promo.asp?p=HJFFGJ431

Enjoy! Riley

Thanks!

grymmjack · Post by **grymmjack** » Wed Jul 19, 2006 8:03 pm

runagate wrote: Can't recall the name, I think it's from Sysinfo.com I'll try to track it down. Something about managing bus queues or the like.

you aren't talking about PCI IRQ latency adjustment are you?

grymmjack · Post by **grymmjack** » Wed Jul 19, 2006 8:05 pm

Ildon wrote:
grymmjack wrote:
Ildon wrote:Hey, I used Voxengo recorder, and it recorded fine. Everything's in time. What does that mean?

Not sure if I should post a demo or not... everything's perfect when I use it.
well, it means that the problem you are encountering is relevant only to the export stuff going on in fl, and isn't general to your sound card, or other hardware outside of rendering process.
Oh, thank god.

so you have one work around; use the recorder instead of render, this is horrible work around, but could be ok for a short while until imageline helps you further?
Yep! That's a pain in the ass, but it's something at least. Thanks for all the help, I really appreciate it.

gol just posted in another thread here. his handle on kvr is tonytonychopper.. PM him perhaps? might be still around on his computer putzing about on KVR?
Cool! Will do. I'll link him to this thread.

btw, when is your bday? mine is the 22nd... i'm gonna be 32

happy early or late bday.

Ildon · Post by **Ildon** » Wed Jul 19, 2006 8:08 pm

grymmjack wrote:btw, when is your bday? mine is the 22nd... i'm gonna be 32 happy early or late bday.

Hehe, happy early birthday! Mine was the 17th. I turned 19.

grymmjack · Post by **grymmjack** » Wed Jul 19, 2006 8:08 pm

oh yeah, ildon, if gol asks, and he may, you can tell him my stuff was setup with defaults of hq and not touching the vst wrapper in fl, as well as i did not turn on smartdisable for the karmafx reverb. i literally inserted edirol hq hypercanvas, added 8th notes via piano roll, rendered, then added karma fx reverb with large hall preset and rendered again.

good luck man! they'll get you sorted i hope.

grymmjack · Post by **grymmjack** » Wed Jul 19, 2006 8:10 pm

Ildon wrote:
grymmjack wrote:btw, when is your bday? mine is the 22nd... i'm gonna be 32 happy early or late bday.
Hehe, happy early birthday! Mine was the 17th. I turned 19.

i've almost got you by half!

*wags his cane angrily from the front porch rocker* damn kids!

FLStudio problem solved!