I've sorted this now - solution to use the Selected Slot - Function which i had overlooked i was trying to configure it with the the Options e.g. Action 1MilksterX wrote: Wed Nov 10, 2021 10:53 pm Hi Jurgen, I'm trying to assign bitwig UI functions to a korg nanokontrol 2 controller but when I open the list of all possible actions / assignments there are far too many for my monitor to display (1080p) and can't see the ones I want to pick. Is there any workaround to this?
DrivenByMoss: Bitwig extension for many hardware controllers (version 26.6.1)
-
- KVRist
- 272 posts since 27 Oct, 2020
-
- KVRAF
- Topic Starter
- 4874 posts since 13 May, 2004
DrivenByMoss 15 is out!
WARNING: This requires Bitwig Studio 4.1 (since it uses the new 4.1 features), which is currently still in Beta!
Get it from http://mossgrabers.de
Enjoy!
WARNING: This requires Bitwig Studio 4.1 (since it uses the new 4.1 features), which is currently still in Beta!
Get it from http://mossgrabers.de
- Akai Fire
- Fixed: Some missing settings were not documented in the manual.
- Akai Force
- New: SELECT + COPY - Creates a new scene.
- Akai Force / MPC
- New: COPY - Duplicates the selected clip and starts it.
- New: Undo button is dimmed if undo (or redo with Shift) is not possible.
- New: Selecting an already selected group track toggles its' expanded state.
- New: The loop start and length is displayed and can be changed.
- Generic Flexi
- New: Increased number of slots to 300.
- New: Selecting an already selected group track toggles its' expanded state.
- Komplete Kontrol A-Series / M32
- New: Undo button is off if undo (or redo with Shift) is not possible.
- Komplete Kontrol Mk2
- New: Undo button is off if undo (or redo with Shift) is not possible.
- New: Selecting an already selected group track toggles its' expanded state.
- Launchkey Mk3
- New: Selecting an already selected group track toggles its' expanded state.
- Launchpad Pro Mk3 / Launchkey Mk3 / Push 2
- New: Selecting an already selected group track toggles its' expanded state.
- New: Improved auto detection depending on Linux version.
- Maschine+, Maschine Mk2 / Mk3, Maschine Studio, Mikro Mk3
- New: Selecting an already selected group track toggles its' expanded state.
- New: Press Swing button twice to select Arrange Loop Start mode.
- New: Press Swing button three times to select Arrange Loop Length mode.
- New: Multiple footswitch support (2 on Mk3 / Plus, 4 on Studio), e.g. use a Boss FS-6 with a stereo cable.
- Maschine Jam
- New: Selecting an already selected group track toggles its' expanded state.
- New: Multiple footswitch support, e.g. use a Boss FS-6 with a stereo cable.
- MCU
- New: Selecting an already selected group track toggles its' expanded state (if track navigation is set to flat).
- Fixed: Prevent not supported automation mode 'latch preview' from being set.
- Novation Remote SL, Mk I, Mk II, SLMkIII
- New: Selecting an already selected group track toggles its' expanded state.
- OSC
- New: Selecting an already selected group track toggles its' expanded state.
- Push 1/2
- New: Selecting an already selected group track toggles its' expanded state.
- New: Push 1: For group tracks different characters are prefixed to show the opened state of a group track.
- New: Push 2: Track icon shows the opened state of a group track.
- New: Select + Tempo knob: Changes arrange loop start (combine with Shift for small changes).
- New: Select + Position knob: Changes arrange loop length (combine with Shift for small changes).
- New: Undo button is off if undo (or redo with Shift) is not possible.
- New: Markers can be added in marker mode.
- New: Delete + 1st row buttons in Marker mode deletes marker.
- New: Improved auto detection depending on Linux version.
Enjoy!
-
- KVRian
- 784 posts since 29 Mar, 2016
Thanks for all your work on this stuff.
-
- KVRian
- 517 posts since 6 Sep, 2003 from Baltimore, MD
Thanks for your work on the new script for BW 4.1!
From your video I discovered we can navigate markers on the Push 2 which is really amazing (everybody go do this!). Is it possible to navigate more than the 8 markers that appear on the screen initially? A way to scroll through marker 'pages' in cases where a song has more than 8 markers.
Many thanks!
From your video I discovered we can navigate markers on the Push 2 which is really amazing (everybody go do this!). Is it possible to navigate more than the 8 markers that appear on the screen initially? A way to scroll through marker 'pages' in cases where a song has more than 8 markers.
Many thanks!
http://www.youtube.com/reflekshun
Music Producer / Audio Engineer
Music Producer / Audio Engineer
-
- KVRAF
- Topic Starter
- 4874 posts since 13 May, 2004
You need to use Shift+left/right cursor keys. But since markers do not have a select state, this makes not much sense. Will change it, so you do not have to press Shift.reflekshun wrote: Tue Nov 16, 2021 5:31 am Thanks for your work on the new script for BW 4.1!
From your video I discovered we can navigate markers on the Push 2 which is really amazing (everybody go do this!). Is it possible to navigate more than the 8 markers that appear on the screen initially? A way to scroll through marker 'pages' in cases where a song has more than 8 markers.
Many thanks!
-
- KVRer
- 3 posts since 2 Dec, 2020
Hi Jurgen,
Receiving an error as per the attached screen dump every time I am trying to add a NI M32 keyboard.
Any need for to deinstalling/clearing any potentially conflicting scripts? There is a only one DbM script in the Bitwig "extension folder".
Windows 10
Bitwig 4.07
DbM 14.1
Thanks
Jan
Receiving an error as per the attached screen dump every time I am trying to add a NI M32 keyboard.
Any need for to deinstalling/clearing any potentially conflicting scripts? There is a only one DbM script in the Bitwig "extension folder".
Windows 10
Bitwig 4.07
DbM 14.1
Thanks
Jan
You do not have the required permissions to view the files attached to this post.
-
- KVRAF
- Topic Starter
- 4874 posts since 13 May, 2004
Something is blocking that port. DO you have any other utility running in the background?Lugerfish wrote: Wed Nov 17, 2021 6:50 pm Hi Jurgen,
Receiving an error as per the attached screen dump every time I am trying to add a NI M32 keyboard.
Any need for to deinstalling/clearing any potentially conflicting scripts? There is a only one DbM script in the Bitwig "extension folder".
Windows 10
Bitwig 4.07
DbM 14.1
Thanks
Jan
You could also try to reinstall komplete driver and hardware services. Have you tried to unplug the USB cable and connect it again when Bitwig is running?
-
- KVRAF
- Topic Starter
- 4874 posts since 13 May, 2004
DrivenByMoss 15.1 is online!
Get it from http://mossgrabers.de
Get it from http://mossgrabers.de
- APC40 / APC40 mkII
- New: Selecting an already selected group track toggles its' expanded state.
- New: Left cursor + Cue Level knob: Changes arrange loop start (combine with Shift for small changes).
- New: Right cursor + Cue Level knob: Changes arrange loop length (combine with Shift for small changes).
- Push
- New: Marker pages can be switched with left/right cursor key (no need to press Shift).
- Fixed: Open folder icon was not shown in all track modes.
-
- KVRer
- 1 posts since 20 Nov, 2021
AUTO-ADMIN: Non-MP3, WAV, OGG, SoundCloud, YouTube, Vimeo, Twitter and Facebook links in this post have been protected automatically. Once the member reaches 5 posts the links will function as normal.
Hi moss, first: Thanks for your great work on the controller scripts! Second: I found a bug 
.Controller: APC40MKII
Bitwig Studio 4.1 Beta 5 (Pre-Release)
DrivenByMoss 15.1.0
When turning the device control encoders on the APC40 the Bitwig status bar normally shows all controllers of the currently selected remote controll page. It does not do this any more. Currently only the name of the remote controller page is shown, but not the 8 device controls:
If I set up the 8 encoders with the Flexi script everything works as expected:
Thus I assume this is a problem with the APC40MKII implementation in DrivenByMoss. (This problem also exists with the build-in Bitwig script located at: https://github.com/bitwig/bitwig-extensions (https://github.com/bitwig/bitwig-extensions))
I am pretty sure it worked in Bitwig 3.x but I do not have an old installation to test.
Thanks very much and keep up the good work!
You do not have the required permissions to view the files attached to this post.
-
- KVRAF
- Topic Starter
- 4874 posts since 13 May, 2004
Please report that to Bitwig.srrrrr wrote: Sat Nov 20, 2021 6:37 pm Hi moss, first: Thanks for your great work on the controller scripts! Second: I found a bug
Controller: APC40MKII
Bitwig Studio 4.1 Beta 5 (Pre-Release)
DrivenByMoss 15.1.0
When turning the device control encoders on the APC40 the Bitwig status bar normally shows all controllers of the currently selected remote controll page. It does not do this any more. Currently only the name of the remote controller page is shown, but not the 8 device controls:
Thus I assume this is a problem with the APC40MKII implementation in DrivenByMoss. (This problem also exists with the build-in Bitwig script located at: https://github.com/bitwig/bitwig-extensions)
I am pretty sure it worked in Bitwig 3.x but I do not have an old installation to test.
Thanks very much and keep up the good work!
-
- KVRian
- 784 posts since 29 Mar, 2016
Hi sir I noticed that pinning the fire controller does not also pin the pads to a specific track unless the track arm button is enabled. Is that normal for midi notes? Is there a way to lock a track in armed state?
-
- KVRAF
- Topic Starter
- 4874 posts since 13 May, 2004
The flow of MIDI notes is not related to its' selection state. The selection state is 'only' for assigning the controller!melodyz wrote: Sun Nov 21, 2021 10:12 pm Hi sir I noticed that pinning the fire controller does not also pin the pads to a specific track unless the track arm button is enabled. Is that normal for midi notes? Is there a way to lock a track in armed state?
Furthermore, MIDI input is not enabled by record arm but by the monitoring state of the track (which is by default automatically enabled when enabling rec arm).
If you need specific control, disable the auto-enabling of rec arm in the Bitwig settings and/or set your monitoring for the tracks individually.
-
Frac-Capitaine Frac-Capitaine https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=476585
- KVRist
- 37 posts since 15 Oct, 2020
HI @moss,
First of all, Danke ! for all your scripts and your youtube tutorials
It is a thing that I didn't find on your manual and tutorial about the Push 2. Is it possible to change clip settings like "next action" from the Push 2 with your script. If not, did you plan this, or is it a feature that the Bitwig API didn't allow yet ?
First of all, Danke ! for all your scripts and your youtube tutorials
It is a thing that I didn't find on your manual and tutorial about the Push 2. Is it possible to change clip settings like "next action" from the Push 2 with your script. If not, did you plan this, or is it a feature that the Bitwig API didn't allow yet ?
-
- KVRAF
- Topic Starter
- 4874 posts since 13 May, 2004
That is currently not available in the API.Frac-Capitaine wrote: Tue Nov 23, 2021 10:33 am HI @moss,
First of all, Danke ! for all your scripts and your youtube tutorials
It is a thing that I didn't find on your manual and tutorial about the Push 2. Is it possible to change clip settings like "next action" from the Push 2 with your script. If not, did you plan this, or is it a feature that the Bitwig API didn't allow yet ?
-
Frac-Capitaine Frac-Capitaine https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=476585
- KVRist
- 37 posts since 15 Oct, 2020
What a shame... It is so useful...
Thanks for your quick reply !
Thanks for your quick reply !