KVR Audio

deaf dunderkwac · Post by **deaf dunderkwac** » Fri Oct 13, 2006 7:35 pm

@ bobsled
So, if I run Usine on three or more different computers I can use OSC meesaging to have multiple vst's running various parts of an arrangement?

(that's what I 'read' into the OSC thingy)(which I need a bit more info on)

bobsled · Post by **bobsled** » Sat Oct 14, 2006 3:19 am

What I read here
http://www.sensomusic.com/forums/viewtopic.php?id=154

Winpcap is a kind of driver witch allows direct motoring of incoming lan packets.
It monitors all Lan Ports, from all remote computers.

With this small driver, you don't have to specify the port or IP address where you want to receive OSC messages.

It simplifies a lot the OSC configuration:
Just tel to Usine witch adapter you want to listen for messages (Gigabyte, Wifi, etc..) that all.
______________________
Olivier Sens
www.sensomusic.com

has me wondering again about the mLAN add-on for my UF5...beyond that, I've no idea how such things work.

I should be asking you how MIDI over LAN is actually more than just goobledegook in CAPSLOCK.

deaf dunderkwac · Post by **deaf dunderkwac** » Sat Oct 14, 2006 4:35 pm

heh, I use midi over midi.... Some old dos tricks to get a quasi-sync thing happening and analog connections to break the jitter.
Crap I wrote in the prehistoric days with piss-poor documentation code I no longer understand (or want to remember)
The junkcode barely works (crashes *r* us) so I'm looking forward to a real implimentation of OSC.
I leave the development to others and am interested in stuff that fits my sence of how things might work.

Usine is interesting.

runagate · Post by **runagate** » Tue Oct 24, 2006 6:42 am

bobsled! I fixed my soundcard issues!
Time to delve into SE and Usine simultaneously!
Hmm... that's the first learning curve that's given me pause thus far, lol. I'm a tidbit intimidated.

Muahahahahaha! Bah, I will pwn!

bobsled · Post by **bobsled** » Tue Oct 24, 2006 7:19 am

runagate wrote:I fixed my soundcard issues!

Congrats!

runagate wrote:Time to delve into SE and Usine simultaneously!

Ya know, SynthEdit taught me more about Usine last week than all the time I'd previously spent trying to "get it". The modules, the routing, the terminology...it makes more sense to me now.

Hope to open a runagate SE plug in Usine soon. As for me, I think

I shall make

a knob.

Yup. One dull little knob that does

nothing...

I wonder if I could make the knob stick out a tongue like that.

Congratulations again on your soundcard

bobsled · Post by **bobsled** » Wed Oct 25, 2006 2:19 am

New add-ons
http://www.sensomusic.com/addons/

Live Beatbox [Patch / Groove box] Posted by senso on 2006-10-18 20:17:47
Live version of a beatbox: create complex patterns with the tap buttons for SN, BD, HH.

Audio to Midi V2 [Patch / Midi] Posted by senso on 2006-10-18 20:14:42
Analyses the incoming sound and converts pitch information to midi note. New improved version (V2). Works better now

Hmmmm...new version of Audio to MIDI...wonder if runagate has seen this yet.

Dozius · Post by **Dozius** » Wed Oct 25, 2006 3:08 am

thanks for the heads up on the addons, I always forget to check in at senso.

bobsled · Post by **bobsled** » Wed Oct 25, 2006 6:26 am

Dozius wrote:...I always forget to check in at senso.

http://www.sensomusic.com/forums/viewtopic.php?id=155
post 6

runagate · Post by **runagate** » Wed Oct 25, 2006 7:33 am

I habitually refresh the forus there every 6 hours or so and I missed that!

Thanks

runagate · Post by **runagate** » Wed Oct 25, 2006 4:03 pm

Usine 2.4

New features:

-fade in/out on Mute/solo/onoff of the track mixer
-grain-sampler module (change the speed of a sample without affect the pitch) [see new examples in the add-section]
-array inlet/outlet in step modules
-append button in conductor lite panel to memorize scenes quickly
-menu Edit/Delete

Fixed bugs:

-some VST parameters aren't visible in the patch (posted by lalo)
-aux send busses order (posted by lalo)
-problem with some VST's in the preset manager module
-export wav files in sub-patches
-array’s memorization in conductor recall
-send midi out problems in Patch Remote Mode assigned midi channel

mahtazz · Post by **mahtazz** » Wed Oct 25, 2006 4:15 pm

Thanks!

bobsled · Post by **bobsled** » Wed Oct 25, 2006 5:20 pm

Thanks! Thread title edited...

runagate · Post by **runagate** » Wed Oct 25, 2006 11:39 pm

I'm warning you, bobsled, I'm really starting to "get it" and I love it.

You may have swung me into the path of playing live shows all the time finally.

bobsled · Post by **bobsled** » Thu Oct 26, 2006 12:48 am

For me it's back to the SE manual and tutorials, plus chasing down the answers to a few more questions I have about automation in eXT (some stuff I need to be able to do in my sleep). Then, my friend, like you it shall be Usine-SE, SE-Usine, Usine-SE...

Ahhhh, I love it.

runagate wrote:...playing live shows all the time finally.

Usine forum has a new Artist section (nothing posted yet). What a great resource that will be for people who perform a lot and would like an exchange of ideas.

Sure would love to experience live runagate...

runagate · Post by **runagate** » Thu Oct 26, 2006 2:31 am

You're just lucky to know me in my laptop phase instead of my actually really unlistenable sax + ARTfx + expression pedal and vocals + Airfx days.

Wish I'd had Usine when I played sax

Usine version 2.4