Anyways.. just to confirm, this new build works great also
Combo Model F [v1.2.5]
-
- KVRian
- 652 posts since 17 Mar, 2002 from Paris
(There must have been something wrong with my Internet browser cache.. I didn't see this post either).
Anyways.. just to confirm, this new build works great also
Anyways.. just to confirm, this new build works great also
I did get a life,once...but it was faulty, so I sent it back.
-
- KVRian
- Topic Starter
- 522 posts since 12 Apr, 2010 from The Netherlands
Cheers, thanks again for testing.vic_france wrote:Anyways.. just to confirm, this new build works great also
-
- KVRAF
- 2046 posts since 13 May, 2004 from Germany
Hi,
I have a problem with this one, but I think it is complicated to locate, because it only occurs in combination with another plugin, so I don't know which is the faulty one.
When I use the ComboF together with the Fx Version of vb3 as lesliesimulation (great sound these 2 together) in Nuendo and want to save the project, saving lasts very long and I can hear a clicking noise through the speakers. Every save lasts longer, up to 15-20 seconds. Also I can not load for example TruePianos as VST on another track. As soon as I remove either ComboV or the vb3fx, the project saves without problems in 1 second and I can load TruePianos again.
I am on Windows XP SP3 32bit and have an Intel Core2quad.
It would be fantastic if this problem could be located as I have to render my organ tracks and remove the vsti or vst.
Cheers
Alex
I have a problem with this one, but I think it is complicated to locate, because it only occurs in combination with another plugin, so I don't know which is the faulty one.
When I use the ComboF together with the Fx Version of vb3 as lesliesimulation (great sound these 2 together) in Nuendo and want to save the project, saving lasts very long and I can hear a clicking noise through the speakers. Every save lasts longer, up to 15-20 seconds. Also I can not load for example TruePianos as VST on another track. As soon as I remove either ComboV or the vb3fx, the project saves without problems in 1 second and I can load TruePianos again.
I am on Windows XP SP3 32bit and have an Intel Core2quad.
It would be fantastic if this problem could be located as I have to render my organ tracks and remove the vsti or vst.
Cheers
Alex
-
- KVRian
- Topic Starter
- 522 posts since 12 Apr, 2010 from The Netherlands
I have just tried to replicate this issue in REAPER, loading ComboV or ComboF, and VB3fx (demo), and then saving the project, and everything seems to work just fine here. Unfortunately I don't have Nuendo here to test things with.rasmusklump wrote:When I use the ComboF together with the Fx Version of vb3 as lesliesimulation (great sound these 2 together) in Nuendo and want to save the project, saving lasts very long and I can hear a clicking noise through the speakers. Every save lasts longer, up to 15-20 seconds. Also I can not load for example TruePianos as VST on another track. As soon as I remove either ComboV or the vb3fx, the project saves without problems in 1 second and I can load TruePianos again.
I am on Windows XP SP3 32bit and have an Intel Core2quad.
What versions of Nuendo, ComboV, ComboF, and VB3 are you running?
I don't know if Nuendo can export VST presets? It would be interesting to know if you can save a single ComboF preset (preferrably in a FXP or FXB file) from within a misbehaving ComboF/VB3 combination project. Perhaps I can then analyse this preset file, and see if there is anything wrong with it.
-
- KVRAF
- 2046 posts since 13 May, 2004 from Germany
Hi,
thank you very much. With your question about the versions you helped me a lot. It seems it was the vb3s fault. When version 1.4 came out I only updated the vsti version but the vb3fx was still 1.3 I have updatet this now to 1.4 and everything works as it should.
Thank you very much again for the two best vst organs (with vb3 short behind)
Alex
thank you very much. With your question about the versions you helped me a lot. It seems it was the vb3s fault. When version 1.4 came out I only updated the vsti version but the vb3fx was still 1.3 I have updatet this now to 1.4 and everything works as it should.
Thank you very much again for the two best vst organs (with vb3 short behind)
Alex
-
- KVRAF
- 2046 posts since 13 May, 2004 from Germany
ah, now I have even read it in the release notes for 1.4 that there was a problem when the host saved a project in 1.3 . .....
-
- KVRian
- Topic Starter
- 522 posts since 12 Apr, 2010 from The Netherlands
You are welcome. I am glad the issue is sorted now.rasmusklump wrote:thank you very much. With your question about the versions you helped me a lot. It seems it was the vb3s fault. When version 1.4 came out I only updated the vsti version but the vb3fx was still 1.3 I have updatet this now to 1.4 and everything works as it should.
And thank you for your kind words.rasmusklump wrote:Thank you very much again for the two best vst organs (with vb3 short behind)
-
- KVRian
- Topic Starter
- 522 posts since 12 Apr, 2010 from The Netherlands
I have just updated Combo Model F to v1.0.2 RC1:
- [AU] Fixed offline render bug
- Updated WDL/IPlug to zlib 1.2.7
-
- KVRian
- Topic Starter
- 522 posts since 12 Apr, 2010 from The Netherlands
I have released Combo Model F v1.0.2.
Changes (since v1.0.1):
Changes (since v1.0.1):
- Mac OS X] Added Intel 64-bit VST support
- [AU] Fixed offline render bug
- [AU] Fixed crash in Studio One when bypassing plug-in
- Automatically select square automation envelope in REAPER for on/off style parameters
- [Windows] Installer now remembers install location
-
- KVRian
- Topic Starter
- 522 posts since 12 Apr, 2010 from The Netherlands
I have started working on renewing Combo Model F's GUI. The new plan is to have three views:
1. Organ
2. Settings
3. Tuning
In the organ view you will get the organ, with only a few tiny tabs, and the on-screen keyboard below it (just as it is now). In the Settings view you will get large tabs and (non-tuning) sliders, but the on-screen keyboard is no longer visible (so you will have to switch back to the Organ view to sample notes through the on-screen keyboard). In the Tuning view you will get the large tabs and the tuning sliders. A new instance of the plug-in will load up in the Settings view (just as it is now).
Here are some screenshots to give you a better idea of what I am talking about:
Organ view
Settings view
Tuning view
(Click on the screenshots to view them at full size.)
1. Organ
2. Settings
3. Tuning
In the organ view you will get the organ, with only a few tiny tabs, and the on-screen keyboard below it (just as it is now). In the Settings view you will get large tabs and (non-tuning) sliders, but the on-screen keyboard is no longer visible (so you will have to switch back to the Organ view to sample notes through the on-screen keyboard). In the Tuning view you will get the large tabs and the tuning sliders. A new instance of the plug-in will load up in the Settings view (just as it is now).
Here are some screenshots to give you a better idea of what I am talking about:
Organ view
Settings view
Tuning view
(Click on the screenshots to view them at full size.)
Last edited by Tale on Sat Jun 16, 2012 7:43 pm, edited 1 time in total.
-
- KVRian
- Topic Starter
- 522 posts since 12 Apr, 2010 from The Netherlands
piattica wrote:Grande !!!!
I have updated the screenshots above with slightly larger buttons in the bottom left corner.
-
- KVRian
- Topic Starter
- 522 posts since 12 Apr, 2010 from The Netherlands
I have just uploaded Combo Model F v1.1.0 beta1:
- Renewed, larger GUI with 3 views: organ, settings and tuning
- Fixed QC LED turning on although tuning hasn't changed
- Updated to latest WDL/IPlug framework
-
- KVRian
- 652 posts since 17 Mar, 2002 from Paris
Very nice!
(thanks, as always )
(thanks, as always
)I did get a life,once...but it was faulty, so I sent it back.