DrivenByMoss: Bitwig extension for many hardware controllers (version 26.6.1)

[moss]

Hi trying to use this program and the akai fire script fails. the incoming midi is feeding the next track with modified midi channel notes using a channel filter out and a channel filter in on the second track. I then have to turn monitor mode to ON on the first track and play in using the akai fire so I can record the received notes on the second.

Not sure if I follow. But what is exactly the problem?

[moss]

Hi,

Would it be possible to set the faders to return to their initial values ​​via a double tap on the Electra One buttons? This would be a nice feature development on this controller.

I thought about this but decided against it since this might conflict with the switching features of the knob touches.

[audioalienz]

Hi,

Thanks for this I just installed the latest version 24 on bitwig 5.1.9, I'm trying to configure my Faderfox UC4 so that whatever parameter I last clicked on via the mouse it will automatically be assigned to the Midi encoder on the UC4, is this possible? sorry if newb question, just starting to get my head around this.

Thanks again, appreciate any help.

I doesn't work like this. Watch the video about the Faderfox:


And watch these 2 videos to get a basic understand of Bitwig Remote Parameters:

Hi Moss,

Thanks for the tutorials, can I ask
Although the script you provided is for the EC4 should I be adding the UC4 as a generic controller in Bitwig instead?

Thanks,

[moss]

Hi,

Thanks for this I just installed the latest version 24 on bitwig 5.1.9, I'm trying to configure my Faderfox UC4 so that whatever parameter I last clicked on via the mouse it will automatically be assigned to the Midi encoder on the UC4, is this possible? sorry if newb question, just starting to get my head around this.

Thanks again, appreciate any help.

I doesn't work like this. Watch the video about the Faderfox:


And watch these 2 videos to get a basic understand of Bitwig Remote Parameters:

Hi Moss,

Thanks for the tutorials, can I ask
Although the script you provided is for the EC4 should I be adding the UC4 as a generic controller in Bitwig instead?

Thanks,

Oh, sorry, I read to quick! I thought you were talking about the EC4!

For the UC4 your best bet is to use the Generic Flexi (until some one else did a specific script for it, didn't check).

[DerUwe]

Hi Moss

I try to understand how the drivenbymoss package knows how to map e.g. surge parameter into the Push2. Other devices like Odin doesn't get mapped.
Is there a possibility to map e.g. Vital stuff into push by my own??

btw:
I am a newcomer in Bitwig as i worked in Ableton before , and i switch from MS to Linux as well.
btw2:
Super cool work you've done here!!!

BR
Uwe

[wintoid]

Hi Jurgen,

Thanks for your amazing work on this Bitwig extension.

I have been trying to make some funky music, but I can't work out how to do a midi program change from my Novation SL MK3. I don't see anything in the manual about this, so I keep having to go back to the computer to try a different sound. Is there something I have missed?

Thanks!

Simon

[moss]

Hi Moss

I try to understand how the drivenbymoss package knows how to map e.g. surge parameter into the Push2. Other devices like Odin doesn't get mapped.
Is there a possibility to map e.g. Vital stuff into push by my own??

btw:
I am a newcomer in Bitwig as i worked in Ableton before , and i switch from MS to Linux as well.
btw2:
Super cool work you've done here!!!

BR
Uwe

Watch this:


And the new Track & Project remote parameters in Bitwig 5 here:

[moss]

Hi Jurgen,

Thanks for your amazing work on this Bitwig extension.

I have been trying to make some funky music, but I can't work out how to do a midi program change from my Novation SL MK3. I don't see anything in the manual about this, so I keep having to go back to the computer to try a different sound. Is there something I have missed?

Thanks!

Simon

Bitwig has a MIDI Program Change Device which you can insert in front of your plugin and then control from a controller as well.

[wintoid]

Bitwig has a MIDI Program Change Device which you can insert in front of your plugin and then control from a controller as well.

Perfect, I'll give that a try. Thanks so much.

[lazyy]

Thank you for the script. I am looking for a comprehensive summary of all functions for my Maschine MK3. From what I can see the video playlist is very fragmented with different explanations over multiple videos etc.

Is there a summary that has it all like a document or video? I know there is a manual but I do not understand it fully. Like for example on page 97 it says "metering section" although I do not know where to find it.

[lao974]

Hi Jurgen, is it possible to set the midi channel on Push to control a hw synth? I mean in Bitwig's HW instrument I'd like to set it "Keep Ch.", and select the channel in Push, so that when I play the piano pads it uses the channel I set.

[moss]

Thank you for the script. I am looking for a comprehensive summary of all functions for my Maschine MK3. From what I can see the video playlist is very fragmented with different explanations over multiple videos etc.

Is there a summary that has it all like a document or video? I know there is a manual but I do not understand it fully. Like for example on page 97 it says "metering section" although I do not know where to find it.

The manual is the reference. Note that there are different Maschine models. E.g. the metering section is only on the Studio version.

[moss]

Hi Jurgen, is it possible to set the midi channel on Push to control a hw synth? I mean in Bitwig's HW instrument I'd like to set it "Keep Ch.", and select the channel in Push, so that when I play the piano pads it uses the channel I set.

No but you can set the MIDI channel for each channel in Bitwig (either to Keep or a specific one).

[moss]

DrivenByMoss 24.1 is online!

Get it from https://mossgrabers.de

• APC40mkII, Fire, Launchpad, Maschine, Maschine JAM, OXI One, Push
  • New: Added new setting 'Turn off scale pads'. If enabled, all pads which represent notes which are in-scale are switched off (instead of white).
  • New: Played chords are displayed in play modes.
• Fire
  • New: The Shift Mode allows to pin the cursor track, cursor device and cursor clip (3 green buttons in the 2nd row from the top).
  • New: The Automation Write Mode can be selected in the Shift Mode (buttons of the 3rd row).
  • New: The initial pad brightness is now set to 20%.
  • New: Switched button combinations for changing the root note and changing the scale layout.
  • New: Toggling clip launcher/arranger automation gives now feedback in the display.
• Generic Flexi
  • New: Functions can now be assigned to 10 different layers. With the 'Function Layers' functions each layer can be temporarily or permanently activated.
  • New: Added functions for Groove: 'Toggle Active', 'Set Shuffle Amount', 'Set Accent Amount'.
  • New: Added functions 'Track: Scroll Bank Page by 1 left', 'Track: Scroll Bank Page by 1 right'.
  • New: Added functions 'FX Track: Scroll Bank Page by 1 left', 'FX Track: Scroll Bank Page by 1 right'.
  • New: Added functions 'Scene: Scroll Bank Page by 1 left', 'Scene: Scroll Bank Page by 1 right'.
  • New: Added settings for 'Behaviour on Pause' and 'Behaviour on Stop'.
• HUI
  • New: Added track, device and EQ modes.
  • New: AUTO1-8 is used for knob press as well (e.g. used like this with X-Touch).
  • New: 'Paste' adds an instrument track.
  • New: 'Shift+Paste' adds an effect track.
  • New: 'Option+Paste' adds an audio track.
  • New: 'Copy' inserts/replaces a device.
  • New: 'Shift+Copy' inserts a device before the currently selected device.
  • New: Option+Copy' inserts a device after the currently selected device.
• MCU
  • New: Keep the Shift button pressed to show the devices on the selected track. Press the respective knob to select the device for editing.
  • New: Added 'Channel Prev/Next' to the function commands which emulate the respective buttons for devices which do not have them.
• OSC
  • New: Added command to de-/activate a layer (/device/layer/{1-8}/activated).
• OXI One
  • New: Playing/recording clips do no longer blink.
• Push 1-3
  • New: In Clips and Markers mode the knobs control now the volume of the tracks.
  • New: Added Load/Save commands to the master mode.
• SLMk3
  • New: Project Parameter Mode - info display shows now the project name.
  • New: Track Parameter Mode - info display shows now the track name.
  • New: Parameter Mode - info display shows now the track name instead of the selected parameter page.
  • New: The first instrument of the track can now be edited (long press UP, then select 'First Ins').
  • Fixed: Selecting Project/Track parameter pages did not work.

Enjoy!

[pikey]

Thanks moss for adding the stop/pause options to the generic script. Works great - much appreciated!