MeldaProduction

audientronic · Post by **audientronic** » Fri Sep 26, 2014 2:31 am

MeldaProduction wrote:Hi folks, so here's the place to ask for features, and I'll be updating this first post, so you know what is the status. So:

Info for presets... DONE

Thank You !!!

MeldaProduction · Post by **MeldaProduction** » Fri Sep 26, 2014 6:18 am

Thank you folks!

Kenit · Post by **Kenit** » Fri Sep 26, 2014 8:14 am

Hi.
New beta is nice.
But new beta doesn't replace the preset.
It shows "ERROR Could not find required attribute(info)"

The previous beta could replace the preset.

Windows 7 64bit.

MeldaProduction · Post by **MeldaProduction** » Fri Sep 26, 2014 8:18 am

Can you try downloading it again? It have been fixed a few hours after the release, but the version number is the same...

CableChannel · Post by **CableChannel** » Fri Sep 26, 2014 8:51 am

Vojtech, could you tell what resonance value is equivalent to the default of 0.71 of the HP/LP in MEqualizer? Q = 0.71 is the value where you don't hear a resonance bump but also not lose highend/lowend unneccesarily. I figure it must be around 20-30%, could you tell the exact value?

MeldaProduction · Post by **MeldaProduction** » Fri Sep 26, 2014 9:10 am

Well, the formula is:

Q = 0.05 + (100 - 0.05) * ((Qpercents/100) ^ 4)

So

Qpercents = 100 * ((Q - 0.05) / (100 - 0.05)) ^ (1 / 4)

Therefore for Q = 1/sqrt(2) (which is what I assume you want), the Qpercents = 28.474970816068351576717151578246%

CableChannel · Post by **CableChannel** » Fri Sep 26, 2014 9:23 am

Thanks

Any particular reason why you chose a more resonant value as default? Just curious.

MeldaProduction · Post by **MeldaProduction** » Fri Sep 26, 2014 9:39 am

Well, it just happened

. I used ears and liked what I hear

.

Kenit · Post by **Kenit** » Fri Sep 26, 2014 10:27 am

MeldaProduction wrote:Can you try downloading it again? It have been fixed a few hours after the release, but the version number is the same...

Thank you

I downloaded it again.
Now it's fine.

Geronimo79 · Post by **Geronimo79** » Fri Sep 26, 2014 1:00 pm

MeldaProduction wrote:Program changes - well, that's problematic - we don't use any fixed number of banks or anything. There are A-H presets and then there presets (and there can be any number of settings). Also the settings are often very huge, this is not a simple instrument with 30ty knobs. Just the core provides about 2000 automatable parameters, plus lots what cannot automated, plus FX... Not that simple...

Clear. Powerfull often is inversely proportional to the complexity
No problem.
Thank you
Enrico

CableChannel · Post by **CableChannel** » Fri Sep 26, 2014 1:53 pm

The LFOs in Envelope mode, can we have a switch that controls the triggering? Currently it only triggers if there is a little break between two notes. I want to play a monophonic legato line using monophonic/toggle in the global voice settings and I want to trigger the LFO on each note regardless whether the last note already ended or not. Is this possible? I.e. something like monophonic/restart for the LFO in envelope mode?
Thanks in advance!

CableChannel · Post by **CableChannel** » Fri Sep 26, 2014 2:11 pm

PS: And an overall voice limit would really be helpful!

Breeze · Post by **Breeze** » Fri Sep 26, 2014 3:27 pm

CableChannel wrote:The LFOs in Envelope mode, can we have a switch that controls the triggering? Currently it only triggers if there is a little break between two notes. I want to play a monophonic legato line using monophonic/toggle in the global voice settings and I want to trigger the LFO on each note regardless whether the last note already ended or not. Is this possible? I.e. something like monophonic/restart for the LFO in envelope mode?
Thanks in advance!

Obviously this requires a workaround and re-trig would be the way to do it; but the real solution is to have at least one or two polyphonic LFOs.

CableChannel · Post by **CableChannel** » Fri Sep 26, 2014 3:32 pm

Breeze wrote:
CableChannel wrote:The LFOs in Envelope mode, can we have a switch that controls the triggering? Currently it only triggers if there is a little break between two notes. I want to play a monophonic legato line using monophonic/toggle in the global voice settings and I want to trigger the LFO on each note regardless whether the last note already ended or not. Is this possible? I.e. something like monophonic/restart for the LFO in envelope mode?
Thanks in advance!
Obviously this requires a workaround and re-trig would be the way to do it; but the real solution is to have at least one or two polyphonic LFOs.

Hm I think there just needs to be a switch controlling the legato behaviour of the LFO. Currently is restarts only if notes are NOT legato, and it would be cool to enable also retriggering when playing legato. Just like the monophonic/restart mode does it with the filter env.

Since it is supposed to go together with the mono/restart mode of the whole preset there is no need for a poly LFO (at least in this case).

Poly LFOs with fixed trigger phase or random phase would of course also be very nice. ALso for the oscillators, a trigger phase control that lets you choose fixed/free would be really cool to get more organic beating effects between OSCs

bsam · Post by **bsam** » Fri Sep 26, 2014 8:52 pm

Hi, I've started to make some patches today -realy exciting this synth! However I could not figure out, how to use KeyFol as a mod source (not for Cutoff -this is solved by now). I wanted to attach it to FM depth for making my pad sound work well across a wider range of the keyboard, so went to see the MIDI settings. One can use this option for applying performance data as mod source here -but I did not find the way for KeyFol. Perhaps it's only a mistake of mine.
Another point I wish to see: a slider on Env Panels for Amt -this could be than easily headed by Multiparameters and/or MIDI, thus providing much more flexibility -at least I think so.

Cheers: Sam

MeldaProduction

KVR Audio

MPowerSynth improvements & feature requests