u-he

kmatheussen · Post by **kmatheussen** » Tue Aug 30, 2016 2:56 pm

(double post)

tasmaniandevil · Post by **tasmaniandevil** » Tue Aug 30, 2016 3:11 pm

kmatheussen wrote:Hi, I've tried Radium under OSX too now, and it doesn't work.

Hi again. I was able to reproduce the issue on Mac using Ardour4. There it exhibited the behaviour you described (the step sequencer not resetting when starting host playback).
I then tested the same thing with the latest internal revision of Filterscape and everything is working fine.
So, there is a good chance that the next Linux beta will have this fix included. But don't ask me when this will be published, I have no clue about that. Just wanted to let you know that it's fixed.

kmatheussen · Post by **kmatheussen** » Tue Aug 30, 2016 3:20 pm

tasmaniandevil wrote:
kmatheussen wrote:Hi, I've tried Radium under OSX too now, and it doesn't work.
Hi again. I was able to reproduce the issue on Mac using Ardour4. There it exhibited the behaviour you described (the step sequencer not resetting when starting host playback).
I then tested the same thing with the latest internal revision of Filterscape and everything is working fine.
So, there is a good chance that the next Linux beta will have this fix included. But don't ask me when this will be published, I have no clue about that. Just wanted to let you know that it's fixed.

Good to hear. Thank you.

Subarumannen · Post by **Subarumannen** » Tue Aug 30, 2016 3:56 pm

tasmaniandevil wrote:
kmatheussen wrote:Hi, I've tried Radium under OSX too now, and it doesn't work.
Hi again. I was able to reproduce the issue on Mac using Ardour4. There it exhibited the behaviour you described (the step sequencer not resetting when starting host playback).
I then tested the same thing with the latest internal revision of Filterscape and everything is working fine.
So, there is a good chance that the next Linux beta will have this fix included. But don't ask me when this will be published, I have no clue about that. Just wanted to let you know that it's fixed.

Have You tried Ardour 5,3 in regards of the issue.
I think some sync issues have been solved in 5.1 or maybe 5.3

kmatheussen · Post by **kmatheussen** » Tue Aug 30, 2016 4:01 pm

Subarumannen wrote:
tasmaniandevil wrote:
kmatheussen wrote:Hi, I've tried Radium under OSX too now, and it doesn't work.
Hi again. I was able to reproduce the issue on Mac using Ardour4. There it exhibited the behaviour you described (the step sequencer not resetting when starting host playback).
I then tested the same thing with the latest internal revision of Filterscape and everything is working fine.
So, there is a good chance that the next Linux beta will have this fix included. But don't ask me when this will be published, I have no clue about that. Just wanted to let you know that it's fixed.
Have You tried Ardour 5,3 in regards of the issue.
I think some sync issues have been solved in 5.1 or maybe 5.3

I tested under ardour 5.3 on linux, and it didn't work. I've tried lots of things to make this work in radium, so I really don't understand how it can work in other hosts, if it really does.

josander · Post by **josander** » Wed Aug 31, 2016 8:06 am

StudioDave wrote: I just checked this behavior with Ardour 5.1.15, my build from latest git sources. I tested ACE and Diva, right-clicking worked as expected, all menus appeared and work. What build are you using for Ardour ?

Hi Dave,

Thanks for responding!

I used the prebuild 5.0 from ardour.org and just tested with the new prebuild 5.3.0, still no luck.

It seems to be a mouse event issue, not a right click issue. I started Ardour from the command line and this is the output when I click on Presswerk:

On "INT VIEW":

Code: Select all

AM_ViewMan::handleMouseDown
AM_ViewControl_StateUndo
AM_ViewMan::addUndoObject inUndoObject == 0: 0
M_Select 0
AM_ViewMan::sortMenus() is not yet ready to go (Cocoa menu Index bug)
validateUndo
AM_ViewControl_StateUndo::end()
MouseUp Without Tracking
failed to read menu output: Resource temporarily unavailable

The "Undo" arrow lights up, but no menu.

Clicking on the u-he logo and the GUI:

Code: Select all

AM_ViewMan::handleMouseDown
validateUndo
currentUndoObject == NULL
MouseUp Without Tracking
failed to read menu output: Resource temporarily unavailable

No menus shows up

Clicking the Save button

Code: Select all

AM_ViewMan::handleMouseDown
validateUndo
currentUndoObject == NULL
MouseUp Without Tracking

Everything else seem to be normal. I can click on stuff in order to push buttons, adjust parameters and double click to reset to default values. The same feedback comes when I use Presswerk inside Mixbus32C 3.6 as well.

I will monitor this thread a few days in the hope that someone from u-he responds. If not, then I will contact Harrison about it.

Jostein

kmatheussen · Post by **kmatheussen** » Thu Sep 01, 2016 6:39 am

kmatheussen wrote: Hi, I've tried Radium under OSX too now, and it doesn't work. I guess it must be something in Ardour, Reaper and Radium that makes filterscape fail. As I said, I've checked the timing data sent to filterscape from radium, and it was all good as far as I could see. Is there a different way to tell the plugin that we start playing than setting the kVstTransportChanged and kVstTransportPlaying flags?

Oh, there was a bug in Radium actually. ppqPositionOfLastBarStart wasn't reset when restarted playing, until the next bar. The step sequencer in Filterscape works as it should now. Guess I didn't check the values good enough.

Edit: But if you don't start playing exactly at a bar start, it still takes a couple of bars until filterscape gets in sync. Hopefully it's working in the latest internal revision.

Subarumannen · Post by **Subarumannen** » Thu Sep 01, 2016 2:32 pm

Does anyone know if Zebra2 HZ will be available for us Linux users ?
I have slowly started to buy U-He software every now and then but Z2HZ seems to be out of reach as for now.

abique · Post by **abique** » Thu Sep 01, 2016 2:33 pm

Subarumannen wrote:Does anyone know if Zebra2 HZ will be available for us Linux users ?
I have slowly started to buy U-He software every now and then but Z2HZ seems to be out of reach as for now.

Yes it is available for Linux users, and since a long time now.

Subarumannen · Post by **Subarumannen** » Thu Sep 01, 2016 2:35 pm

abique wrote:
Subarumannen wrote:Does anyone know if Zebra2 HZ will be available for us Linux users ?
I have slowly started to buy U-He software every now and then but Z2HZ seems to be out of reach as for now.
Yes it is available for Linux users, and since a long time now.

Great, sorry for not checking before I asked

Subarumannen · Post by **Subarumannen** » Thu Sep 01, 2016 2:40 pm

abique wrote:
Subarumannen wrote:Does anyone know if Zebra2 HZ will be available for us Linux users ?
I have slowly started to buy U-He software every now and then but Z2HZ seems to be out of reach as for now.
Yes it is available for Linux users, and since a long time now.

Checked the KVR Linux Beta forum and found no Linux Build for Zebra HZ
The U-he page describing Zebra HZ only mention Windows and Mac

Where can I find info about the Linux Z2HZ ?

/Subarumannen

abique · Post by **abique** » Thu Sep 01, 2016 2:41 pm

Once you have bought it you can get a download link by asking support@u-he.com.

Subarumannen · Post by **Subarumannen** » Thu Sep 01, 2016 2:43 pm

abique wrote:Once you have bought it you can get a download link by asking support@u-he.com.

Oh, that was not obvious.
Thanks ! Will consider purchasing

/S

abique · Post by **abique** » Thu Sep 01, 2016 2:48 pm

Hehe, our page for TDZ definitely needs an update!

Beamboom · Post by **Beamboom** » Fri Sep 02, 2016 2:52 pm

abique wrote:Hehe, our page for TDZ definitely needs an update!

In fact, most your pages need an update. I don't think Linux is mentioned anywhere, for any of the products?

u-he

KVR Audio

Linux public beta (4408)