VPS Avenger 2.4 [RELEASED - FAQ in OP]

VST, AU, AAX, CLAP, etc. Plugin Virtual Instruments Discussion
Post Reply New Topic
RELATED
PRODUCTS
VPS Avenger VPS Avenger 2

Post

Since someone posted the new factory sounds are not special, I have to add,
most of the presets blow me away, no kidding! Now that macros work and cpu is low, I could check and use the macros in a creative way. Mamma Mia!
I am not into arps and seq that much, but will also check, but
Category Pads
Analog Voyage use the modwheel and especially 3rd macro "open up" very nice

Heavens Gate what a pad with mw and Stepper Macro what a pad! So beautiful

Pitchypad it's kinda funky with mw and sweeps macro love it

Teisc200F Opener my fav one mw and 2nd macro soooo cool

Vocialize maybe that's my fav one!? So inspiring
PIANO&KEYS
Bellties, very very nice, cool delay

Dream Keys1 please don't this, can't stop playing what a great combinatiin of chorus, reverb and delay, all macros are kinda magical and drive your creativity insane

Engima what funky keys loooove it

Epic Cinematic Keys don't activate "Harsh" don't you do it!

Magnetic omg I love that distortion

"love em all in this category"

Plucked
Calypso move first macro "highpass" up and down and you get a unique wah-like sound, soooo funky

Mid Puncher it's getting even funkier, every macro a very special experience

Rida wooow Ghosty fx rocks!!! And the delay. THE DELAY!!!

WHERE are the EDM presets, haven't any edm presets been added to factory content of v2?

No special sounds? Well, there obviously must be something wrong with my ears and I have not even tested 20% of the new presets
I am glad, the old orange skin is still available, the new one looks great, too, but Avenger is orange for me, imagine bananas would be blue all of a sudden, you would be a lil confused, wouldn't you?!

Post

OK- just bought even though I think its expensive reports of the new update being CPU friendly pushed me over the edge...however I cant run it (frustrating!) It says 'says remove file write protection'- never seen this message before for any software ever! I tried off line (download key file) but same error- cant use it! Very very frustrating as only bought now as I have tonight free!

SOLVED -VMANAGER Reinstall AND reboot 
Last edited by SLiC on Tue Nov 28, 2023 8:05 pm, edited 1 time in total.
X32 Desk, i9 PC, S88MK3, S1, BWS, Live + PUSH 3, Osmose, RedShift 6 Pro3, Tempera, Syntakt, Digitone II, OP1-F, OPXY, Eurorack, TD27 Drums, Guitars, Basses, Amps and of course lots of pedals!

Post

SLiC wrote: Tue Nov 28, 2023 7:23 pm OK- just bought even though I think its expensive reports of the new update being CPU friendly pushed me over the edge...however I cant run it (frustrating!) It says 'says remove file write protection'- never seen this message before for any software ever! I tried off line (download key file) but same error- cant use it! Very very frustrating as only bought now as I have tonight free!

Win 11, i9 clean system (just audio DAW)

Little help please!

Image
Maybe you have not seen, but Manuel asked to write to
support@vengeance-sound.com

Post

SLiC wrote: Tue Nov 28, 2023 7:23 pm OK- just bought even though I think its expensive reports of the new update being CPU friendly pushed me over the edge...however I cant run it (frustrating!) It says 'says remove file write protection'- never seen this message before for any software ever! I tried off line (download key file) but same error- cant use it! Very very frustrating as only bought now as I have tonight free!

Win 11, i9 clean system (just audio DAW)

Little help please!

Image
I had a few errors of varying weirdness in the online activation. I ended up doing the offline method on both machines, that worked fine for me.
http://www.guyrowland.co.uk
http://www.sound-on-screen.com
W11, Ryzen 7900, 64gb RAM, RME Babyface, 1050ti, PT 2024 Ultimate, Cubase Pro 14
Macbook Air M2 OSX 10.15

Post

DCrown wrote: Tue Nov 28, 2023 7:36 pm
SLiC wrote: Tue Nov 28, 2023 7:23 pm OK- just bought even though I think its expensive reports of the new update being CPU friendly pushed me over the edge...however I cant run it (frustrating!) It says 'says remove file write protection'- never seen this message before for any software ever! I tried off line (download key file) but same error- cant use it! Very very frustrating as only bought now as I have tonight free!

Win 11, i9 clean system (just audio DAW)

Little help please!

Image
Maybe you have not seen, but Manuel asked to write to
support@vengeance-sound.com
I was kind of hoping some here could just tell me what to do now so I can use it! I will write support but this thread just sems to be full of people who cant run the software, I have a totally normal, clean Win 11 system? Its also deleted my Vengeance 1 so I cant use anything now!
X32 Desk, i9 PC, S88MK3, S1, BWS, Live + PUSH 3, Osmose, RedShift 6 Pro3, Tempera, Syntakt, Digitone II, OP1-F, OPXY, Eurorack, TD27 Drums, Guitars, Basses, Amps and of course lots of pedals!

Post

noiseboyuk wrote: Tue Nov 28, 2023 7:39 pm
SLiC wrote: Tue Nov 28, 2023 7:23 pm OK- just bought even though I think its expensive reports of the new update being CPU friendly pushed me over the edge...however I cant run it (frustrating!) It says 'says remove file write protection'- never seen this message before for any software ever! I tried off line (download key file) but same error- cant use it! Very very frustrating as only bought now as I have tonight free!

Win 11, i9 clean system (just audio DAW)

Little help please!

Image
I had a few errors of varying weirdness in the online activation. I ended up doing the offline method on both machines, that worked fine for me.
First thing I tried, off-line also said write protected, also tried running as admin etc. I'm out of ideas now. I have emailed support but you know how disappointing it is when you finally talk yourself in to upgrading then you cant use it (and loose the original!)
X32 Desk, i9 PC, S88MK3, S1, BWS, Live + PUSH 3, Osmose, RedShift 6 Pro3, Tempera, Syntakt, Digitone II, OP1-F, OPXY, Eurorack, TD27 Drums, Guitars, Basses, Amps and of course lots of pedals!

Post

SLiC wrote: Tue Nov 28, 2023 7:43 pm First thing I tried, off-line also said write protected, also tried running as admin etc. I'm out of ideas now.
Is it possible you might have some anti-ransomware or other security protection that is blocking the ability to write?

For the record I had to do offline authorization even though my studio system is online. But that was on the first day or so when the servers were melting down.

(which in a way is a good thing because it means the Avenger user base is large and that bodes well for its future)
None are so hopelessly enslaved as those who falsely believe they are free. Johann Wolfgang von Goethe

Post

you maybe use external storage? Try your system disk, just for testing

Post

Teksonik wrote: Tue Nov 28, 2023 7:51 pm
SLiC wrote: Tue Nov 28, 2023 7:43 pm First thing I tried, off-line also said write protected, also tried running as admin etc. I'm out of ideas now.
Is it possible you might have some anti-ransomware or other security protection that is blocking the ability to write?

For the record I had to do offline authorization even though my studio system is online. But that was on the first day or so when the servers were melting down.

(which in a way is a good thing because it means the Avenger user base is large and that bodes well for its future)
Nothing other than the standard Win 11 stuff, totally clean and untweaked machine just used for Audio in studio- no problem with iLok, Roland Cloud, UA Connect etc...100s of VSTS, never had an issue (or with Avenger 1)

I thought it may be an issue with the new update as its just out hence whey I posted-but if anyone else with Win 11 has installed OK with the new update today I'll know its just me!
X32 Desk, i9 PC, S88MK3, S1, BWS, Live + PUSH 3, Osmose, RedShift 6 Pro3, Tempera, Syntakt, Digitone II, OP1-F, OPXY, Eurorack, TD27 Drums, Guitars, Basses, Amps and of course lots of pedals!

Post

Updated to 2.0.2 but there is still an issue with the vman :

Version installed/latest : n.a./2.0.2

But activation is ok and everything works fine, so no problems here.

Post

OK I got it !! Reinstalled VManager and its working, I'm in :-)
X32 Desk, i9 PC, S88MK3, S1, BWS, Live + PUSH 3, Osmose, RedShift 6 Pro3, Tempera, Syntakt, Digitone II, OP1-F, OPXY, Eurorack, TD27 Drums, Guitars, Basses, Amps and of course lots of pedals!

Post

msvs wrote: Tue Nov 28, 2023 6:53 am some summary
- there is no demo
- there is update 2.0.1 which should adress VMAN licensing problems
- its not for live play and composition (wonder what Bartek does there all the time)
- there are ONLY EDM sounds, we dont offer a single cinematic, ambient or vintage xp
- I cant give support here of course. But the support can: support@vengeance-sound.com
Is there a 2.0 manual? Currently the manual link points here: https://downloads.vengeance-sound.com/p ... _1.8.4.pdf

Post

not yet, we covered all NEW stuff up in YT videos. We know that only 1% even bothering downloading a manual nowadays. I think that is a pity, since the manual is very good. I always enjoyed reading big manuals

Post

The new Spectral oscillator is so good!

I've been throwing random sounds into it and sculpting it into something more musical.

Great stuff!

Post

The GUI is noticeably sharper, looks very good now (although I still don’t like the avenger logo all sloped, but that’s really picky!)

Just we through the factory 2 bank tonight, personally I thought they were pretty good with well programmed macros - Avenger really is an instant gratification synths…3 instances a pad, an arp and a lead = full track!
X32 Desk, i9 PC, S88MK3, S1, BWS, Live + PUSH 3, Osmose, RedShift 6 Pro3, Tempera, Syntakt, Digitone II, OP1-F, OPXY, Eurorack, TD27 Drums, Guitars, Basses, Amps and of course lots of pedals!

Post Reply

Return to “Instruments”