Heya,
I have gotten a major update of my VST work ready.
So I took all the links down that are scattered over the forums I partake in,
and am making everything available in one download->
http://www.sendspace.com/pro/dl/trutma
It's a 66.04mb .rar d/l,
that includes descriptions, hints on use and artwork also.
It's the pack I sent to Core which he will update Rekkerd with this week.
There are 4 instruments, and 21 effects.
Hope you find them useful and inspiring.
Here are the terms of use-
They are all fully working plugs and are free to use for non-commercial purposes.
If you intend to sell the audio run through or originating from my plugs,
there is an obligation to buy them. If you are producing commercially,
drop me a line at my hotmail-> nix808@....
I won't ask too much
All are built entirely in Flowstone now, using the new Ruby capability to function where my MAX device or Usine did in past.
So they are only Win32bit/x86, but all run fine on 64bit OS
njoy!
Phonics VST .dll(25 pluggies)
-
- KVRAF
- Topic Starter
- 5146 posts since 22 Jul, 2006 from Tasmania, Australia
Last edited by nix808 on Thu Oct 10, 2013 12:22 pm, edited 1 time in total.
-
- KVRAF
- Topic Starter
- 5146 posts since 22 Jul, 2006 from Tasmania, Australia
Here are the descriptions of the goodies->
EFFECTS->
d1g1t:-
Bit-cruher and samplerate reducer.
ECHOecho:-
Simple delay. It uses a divisor of the BPM to set the tap length,
with the ability to use your own fraction. It's easy to dial up your favourite dubs.
freQ:-
Q8 parametric EQ with phase and fft display. All bands are switchable off and on, and it is hybrid-ie.
the sliders and graph update each other. One feature that I think is handy in an eq is max gain/reduction scale knob.
It's marked dB. You can be delicate or use a higher max.
The parameters are switchable, so you can switch between ie. notch and shelf, ABing to taste.
It's quite vanilla in that it doesn't really colour, however at extreme settings the biquads will start to exhibit artifacts,
which are to be expected I understand. It sounds great when you automate sweeps, which was hard to implement without crashes.
Graphics by Grymmjack- nice one bruv
Mono2Stereo:-
Utility to route channels.
If you are recording a mono source, just insert this in the signal chain to process in stereo.
Limiter:-
I think the ratio is infinite. Tames peaks on masters perfectly well. Easy to use meters.
Octaver:-
Stream and counter-based octaver, shifts pitch down 12 semi-tones for playing bass on electric among.
It chops grain start points on 0-crossings, in aid of reducing vibrato.
Shifter_RedLight:-
3 line variable pitch shifter stomp.
Can run the lines in parralel or series. Supports PDC,
as the grains take 1500 samples to process.
It works without pops in small projects,
but when the CPU is busy, it sometimes pops, due to the trigger architecture.
Can reccomend rendering audio to samples in large projects.
It works by resampling grains.
Standard Issue:-
Collection of effects that replace my old one- Wave Mechanic.
There are currently 11 effects.
Chorus,compressor,distorsion,drive,eq,flanger,hardclip,3 phasers,reverb
Hopefully fun to experiment with fx chains.
Sync:-
Recorder VSTfx that allows you to cut and export loops, similar to IL Edison sorta.
I originally built this to use this idea I had-
to play a metronome click on beat divisions of a sound editor's selection,
so you can tell when you selection is looping in sync.
Grid divisions of the selection are also displayed graphically.
thus enabling easier finding of correct loop points.
Additionally it records and you can play the recording back internally or via virtual midi cable,
DAW routing or DAW transport to preview your loop in the mix.
You can flick left and right with selection, also double and halve it.
Zooming of time and amplitude is in there.
I will soon have it normalize, and fade the ends of the cut loop.
You need a 3rd party app to timestretch, but I am looking at this.
Max recording time is 10 min with 3 gig of RAM, but shorter takes are previewed in the mix nicely.
There is a drawback with this device, after recording, the plugin will render the sound to conserve RAM,
so it requires the user to wait for the same period of time it took to record. Likewise when saving.
It will not recall what it has recorded if you close the project, u need to save the .wavs you want.
It includes a BPM calculator, so if ur wondering what bpm a track is at, select a bar long loop,
and it will be displayed in the footer.
Kenny Buck made the GUI, making it more ergonomical also. So much thanks Kenny 8D
Synthetic Reverb:-
Built by Maik Menz and released to the Outsim community.
I've made this one available as VST.
It's an unnatural sounding algo.
Cheers Myco
Tripper:-
Auto-filter.
It has 18 filter types, modulatable by env follower or tripped env.
It's good for wahs, using audio as filter mod source and distorsion.
The filter curve is animated, so you can see also what you are doing a touch easier.
Also you can turn the modulation off and have static cut.
MIDI learn is supported. The depth knobs are logarithmic, so the low cutoff for wah is easier to hit now.
Go hacks on res and cut via controller!
Right click on knob enables learn, select MIDI source with the little female plug.
This version has 2 new filter types, formant(vowel) and comb.
INSTRUMENTS->
Dream Sequence:-
Polyphonic,up to 32 pattern and 128 step MIDI sequencer.
Copying and pasting of patterns is supported. There are 2 modes- 'edit' and 'run'.
In edit mode it plays only the current pattern. In run it loops the patterns sequentially
from start and end points which are set by the user.
Graphics by Galaxpel.
Timing seems not to be sample accurate, however it is well within a usable precision.
Drum Roll:-
Drum synth. Hopefully a full drum kit can be coaxed out of the 2 oscillators.
Will come back with an update including the full presets, but for now it only has kick, clap and
cymbal. The vector control's colours can be customized to taste.
It has the requisite multi-point spline envelopes for pitch,amp and filter needed in drum stnthesis.
There are also 4 effects to colour ur drum.
Entrancer:-
Instrument originally made for the KVR Developer Challenge 2009.
It has 375 wavetables, particularly focused on the 303, however it is polyphonic and has 3 osc.
I used wavetables from Muon Tau, IL TS-404, Venom VB303,Roland TB303, Cheetah MS-6 analog among others.
It's a labour of love and damnably frustrating to develop too. There is one singular feature-
the ability to sample the output audiio stream back int a wavetable. You can generate original
soundforms quite easily, just select start and end points, and press the little arrow on whichever osc
slot u want to use when in user(U) mode.
Other nice stuff it does-
porta while polyphonic
unison
aliasing and anti-aliased oscs
PW & PWM
hard sync
draw form with splines
ASM optimized envelopes
18 filter types, filter per osc
4, 3 mode mod sources with ~40 destinations
sequencer with customizable arp and multiple patterns
6 effects
RM & FM
Sampler:-
Simple yet versatile sampler, designed to load bar loops or picks, although it will accept tracks.
It has decent scope for changing the original samples with unison, porta, cut mod and gate/volume mod.
I just got the formant filter working, sounds cool whe modulated over whatever audio material.
EFFECTS->
d1g1t:-
Bit-cruher and samplerate reducer.
ECHOecho:-
Simple delay. It uses a divisor of the BPM to set the tap length,
with the ability to use your own fraction. It's easy to dial up your favourite dubs.
freQ:-
Q8 parametric EQ with phase and fft display. All bands are switchable off and on, and it is hybrid-ie.
the sliders and graph update each other. One feature that I think is handy in an eq is max gain/reduction scale knob.
It's marked dB. You can be delicate or use a higher max.
The parameters are switchable, so you can switch between ie. notch and shelf, ABing to taste.
It's quite vanilla in that it doesn't really colour, however at extreme settings the biquads will start to exhibit artifacts,
which are to be expected I understand. It sounds great when you automate sweeps, which was hard to implement without crashes.
Graphics by Grymmjack- nice one bruv
Mono2Stereo:-
Utility to route channels.
If you are recording a mono source, just insert this in the signal chain to process in stereo.
Limiter:-
I think the ratio is infinite. Tames peaks on masters perfectly well. Easy to use meters.
Octaver:-
Stream and counter-based octaver, shifts pitch down 12 semi-tones for playing bass on electric among.
It chops grain start points on 0-crossings, in aid of reducing vibrato.
Shifter_RedLight:-
3 line variable pitch shifter stomp.
Can run the lines in parralel or series. Supports PDC,
as the grains take 1500 samples to process.
It works without pops in small projects,
but when the CPU is busy, it sometimes pops, due to the trigger architecture.
Can reccomend rendering audio to samples in large projects.
It works by resampling grains.
Standard Issue:-
Collection of effects that replace my old one- Wave Mechanic.
There are currently 11 effects.
Chorus,compressor,distorsion,drive,eq,flanger,hardclip,3 phasers,reverb
Hopefully fun to experiment with fx chains.
Sync:-
Recorder VSTfx that allows you to cut and export loops, similar to IL Edison sorta.
I originally built this to use this idea I had-
to play a metronome click on beat divisions of a sound editor's selection,
so you can tell when you selection is looping in sync.
Grid divisions of the selection are also displayed graphically.
thus enabling easier finding of correct loop points.
Additionally it records and you can play the recording back internally or via virtual midi cable,
DAW routing or DAW transport to preview your loop in the mix.
You can flick left and right with selection, also double and halve it.
Zooming of time and amplitude is in there.
I will soon have it normalize, and fade the ends of the cut loop.
You need a 3rd party app to timestretch, but I am looking at this.
Max recording time is 10 min with 3 gig of RAM, but shorter takes are previewed in the mix nicely.
There is a drawback with this device, after recording, the plugin will render the sound to conserve RAM,
so it requires the user to wait for the same period of time it took to record. Likewise when saving.
It will not recall what it has recorded if you close the project, u need to save the .wavs you want.
It includes a BPM calculator, so if ur wondering what bpm a track is at, select a bar long loop,
and it will be displayed in the footer.
Kenny Buck made the GUI, making it more ergonomical also. So much thanks Kenny 8D
Synthetic Reverb:-
Built by Maik Menz and released to the Outsim community.
I've made this one available as VST.
It's an unnatural sounding algo.
Cheers Myco
Tripper:-
Auto-filter.
It has 18 filter types, modulatable by env follower or tripped env.
It's good for wahs, using audio as filter mod source and distorsion.
The filter curve is animated, so you can see also what you are doing a touch easier.
Also you can turn the modulation off and have static cut.
MIDI learn is supported. The depth knobs are logarithmic, so the low cutoff for wah is easier to hit now.
Go hacks on res and cut via controller!
Right click on knob enables learn, select MIDI source with the little female plug.
This version has 2 new filter types, formant(vowel) and comb.
INSTRUMENTS->
Dream Sequence:-
Polyphonic,up to 32 pattern and 128 step MIDI sequencer.
Copying and pasting of patterns is supported. There are 2 modes- 'edit' and 'run'.
In edit mode it plays only the current pattern. In run it loops the patterns sequentially
from start and end points which are set by the user.
Graphics by Galaxpel.
Timing seems not to be sample accurate, however it is well within a usable precision.
Drum Roll:-
Drum synth. Hopefully a full drum kit can be coaxed out of the 2 oscillators.
Will come back with an update including the full presets, but for now it only has kick, clap and
cymbal. The vector control's colours can be customized to taste.
It has the requisite multi-point spline envelopes for pitch,amp and filter needed in drum stnthesis.
There are also 4 effects to colour ur drum.
Entrancer:-
Instrument originally made for the KVR Developer Challenge 2009.
It has 375 wavetables, particularly focused on the 303, however it is polyphonic and has 3 osc.
I used wavetables from Muon Tau, IL TS-404, Venom VB303,Roland TB303, Cheetah MS-6 analog among others.
It's a labour of love and damnably frustrating to develop too. There is one singular feature-
the ability to sample the output audiio stream back int a wavetable. You can generate original
soundforms quite easily, just select start and end points, and press the little arrow on whichever osc
slot u want to use when in user(U) mode.
Other nice stuff it does-
porta while polyphonic
unison
aliasing and anti-aliased oscs
PW & PWM
hard sync
draw form with splines
ASM optimized envelopes
18 filter types, filter per osc
4, 3 mode mod sources with ~40 destinations
sequencer with customizable arp and multiple patterns
6 effects
RM & FM
Sampler:-
Simple yet versatile sampler, designed to load bar loops or picks, although it will accept tracks.
It has decent scope for changing the original samples with unison, porta, cut mod and gate/volume mod.
I just got the formant filter working, sounds cool whe modulated over whatever audio material.
-
- KVRAF
- Topic Starter
- 5146 posts since 22 Jul, 2006 from Tasmania, Australia
Screens->
the downloads climbing give me kicks, so M.O.D
the downloads climbing give me kicks, so M.O.D
-
- KVRAF
- Topic Starter
- 5146 posts since 22 Jul, 2006 from Tasmania, Australia
uppage for hours of fun-
freQ,Entrancer and the sampler seem like something especially.
I so wanted to get the last glitch out of freQ,
I think it's a gem now
freQ,Entrancer and the sampler seem like something especially.
I so wanted to get the last glitch out of freQ,
I think it's a gem now
-
thecontrolcentre thecontrolcentre https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=76240 - KVRAF
- 35189 posts since 27 Jul, 2005 from the wilds of wanny
-
- KVRAF
- Topic Starter
- 5146 posts since 22 Jul, 2006 from Tasmania, Australia
ur welcome!
Hope there's a couple of keepers in there.
Let me know if anything's misbehaving.
Hope there's a couple of keepers in there.
Let me know if anything's misbehaving.
-
- Banned
- 12368 posts since 30 Apr, 2002 from i might peeramid
how did i miss this thread??
haven't tried them, but work obviously went into eg. presenting clear, ordered guis. i very much appreciate freeware
haven't tried them, but work obviously went into eg. presenting clear, ordered guis. i very much appreciate freeware
you come and go, you come and go. amitabha neither a follower nor a leader be tagore "where roads are made i lose my way" where there is certainty, consideration is absent.
-
- KVRAF
- Topic Starter
- 5146 posts since 22 Jul, 2006 from Tasmania, Australia
no worries xoxos-
thanks for ur stuff too,
will see how the Bong hits go hehe
Sync prolly took the most time/effort,
I will make an update this week that gives record on host play.
This UI was just terrible until Kenny made it more friendly.
Certainly I tried to lay them out neatly and logically,
glad you think they r.
Let me know how find their use/sound if u get keen.
thanks for ur stuff too,
will see how the Bong hits go hehe
Sync prolly took the most time/effort,
I will make an update this week that gives record on host play.
This UI was just terrible until Kenny made it more friendly.
Certainly I tried to lay them out neatly and logically,
glad you think they r.
Let me know how find their use/sound if u get keen.
-
- Banned
- 10196 posts since 12 Mar, 2012 from the Bavarian Alps to my feet and the globe around my head
Entrancer is a nice synth with many features and a pretty decent sound. Unfortunately the version that I've tested some weeks ago crashed several times in my REAPER, so I don't know if I'd use it again (no need to fix the bugs, I have more than enough other stuff to use)...
-
- KVRAF
- Topic Starter
- 5146 posts since 22 Jul, 2006 from Tasmania, Australia
Thanks, will test for Reaper users.
Damn.
I think the step LFOs are the least stable components.
I will send a serialized(if you want that) commercial version to you if you could try the latest build.
Otherwise u would just be free to use it for whatever.
Here is just Entrancer ver.1->
http://www.sendspace.com/pro/dl/j67w53
if u wish to spend the time. Otherwise, thanks for the report fella
It would help me if u could tell me what you were doing when the crashes occured, however if it just seems random- it doesn't really point at anything particularly.
Cheers man, sorry for crashing ur projects
I will surely try and bugfix for Reaper, if there is actually a Reaper specific issue. As always in good time I will try and fix any problems
edit-updated link to current 3/12/13
Damn.
I think the step LFOs are the least stable components.
I will send a serialized(if you want that) commercial version to you if you could try the latest build.
Otherwise u would just be free to use it for whatever.
Here is just Entrancer ver.1->
http://www.sendspace.com/pro/dl/j67w53
if u wish to spend the time. Otherwise, thanks for the report fella
It would help me if u could tell me what you were doing when the crashes occured, however if it just seems random- it doesn't really point at anything particularly.
Cheers man, sorry for crashing ur projects
I will surely try and bugfix for Reaper, if there is actually a Reaper specific issue. As always in good time I will try and fix any problems
edit-updated link to current 3/12/13
Last edited by nix808 on Tue Dec 03, 2013 6:58 am, edited 4 times in total.
-
- KVRAF
- Topic Starter
- 5146 posts since 22 Jul, 2006 from Tasmania, Australia
I played with it for 30 min in Reaper without a crash.
Will try again soon.
Janey Mac I got frustrated trying to open the plug's window. I dunno why Reaper and Tracktion call instruments FX.
Anyway, I will make a heavier project and test.
Also I find now that the random waveform generator is broken. Will fix
Will try again soon.
Janey Mac I got frustrated trying to open the plug's window. I dunno why Reaper and Tracktion call instruments FX.
Anyway, I will make a heavier project and test.
Also I find now that the random waveform generator is broken. Will fix
-
- KVRAF
- Topic Starter
- 5146 posts since 22 Jul, 2006 from Tasmania, Australia
Random osc form generator fixed->
http://www.sendspace.com/pro/dl/j67w53
Press the ? button for a new form,
it will save with the project-
and no more hangy shenanigans when using this.
There was a change in the way strings are being handled.
My workaround was now obsolete anyway, so another bug bytes the dust
http://www.sendspace.com/pro/dl/j67w53
Press the ? button for a new form,
it will save with the project-
and no more hangy shenanigans when using this.
There was a change in the way strings are being handled.
My workaround was now obsolete anyway, so another bug bytes the dust
Last edited by nix808 on Tue Dec 03, 2013 6:59 am, edited 3 times in total.
-
- Banned
- 10196 posts since 12 Mar, 2012 from the Bavarian Alps to my feet and the globe around my head
I'll test the new version on the weekend... 
-
- Banned
- 12368 posts since 30 Apr, 2002 from i might peeramid
took a while to init (and about the same time, ~15s, when reloading), gave me an "out of memory!" in synthedit, works fine in eXT, reloads random wave as saved.
you come and go, you come and go. amitabha neither a follower nor a leader be tagore "where roads are made i lose my way" where there is certainty, consideration is absent.
-
- KVRAF
- Topic Starter
- 5146 posts since 22 Jul, 2006 from Tasmania, Australia
Cheers fellas,
I hope it hangs in there Tricky,
the license to use it for commercial works is yours if u'd like.
xoxos- I have been fiddling with it in SE-
It's to do with the random wavetable preset array.
It will let me have 512, not 2048 entries.
So there will be a some sort of fix in the next couple of days.
I'm doing something wrong, but have the fault under my beady eye.
Possibly I'll make the random waves shorter,
using single cycle instead of 4 cycles as this may be better anyway.
It seems it's not actually taking too much RAM. Some sort of incompatability
with SE.
Yeah-It takes a while to load coz of it's complexity(124,000 most basic components(primitives)), all those array and high res tables,
many preset params.
All the same I will go over it and try to make it faster to load.
It takes about 8 secs on my quick lappy.
edit-will try xt, usually I only test in Orion-
I takes 5 secs to load there and the same to recall a project.
{cry} SE hates me and my plugin. Project recall is like 20 secs, even when I take the table preset out. I'm not sure what to do here. Will see if I can update my SE. Sorry X, I have spent 3 hours now testing SE. Will break and come back to it. I'll write a short song in Reaper now. I will do all I can to integrate Entrancer into whatever DAW u have. Reaper seems OK, will do this short song, SE is broken, Orion is fine with as heavy a project as ur CPU can take. Let me know how it goes in ur host of choice if you like, and want to help me.
edit2_the sampler is working quick as though(in SE) X, if you would like to try that one. Seems no issues.
I hope it hangs in there Tricky,
the license to use it for commercial works is yours if u'd like.
xoxos- I have been fiddling with it in SE-
It's to do with the random wavetable preset array.
It will let me have 512, not 2048 entries.
So there will be a some sort of fix in the next couple of days.
I'm doing something wrong, but have the fault under my beady eye.
Possibly I'll make the random waves shorter,
using single cycle instead of 4 cycles as this may be better anyway.
It seems it's not actually taking too much RAM. Some sort of incompatability
with SE.
Yeah-It takes a while to load coz of it's complexity(124,000 most basic components(primitives)), all those array and high res tables,
many preset params.
All the same I will go over it and try to make it faster to load.
It takes about 8 secs on my quick lappy.
edit-will try xt, usually I only test in Orion-
I takes 5 secs to load there and the same to recall a project.
{cry} SE hates me and my plugin. Project recall is like 20 secs, even when I take the table preset out. I'm not sure what to do here. Will see if I can update my SE. Sorry X, I have spent 3 hours now testing SE. Will break and come back to it. I'll write a short song in Reaper now. I will do all I can to integrate Entrancer into whatever DAW u have. Reaper seems OK, will do this short song, SE is broken, Orion is fine with as heavy a project as ur CPU can take. Let me know how it goes in ur host of choice if you like, and want to help me.
edit2_the sampler is working quick as though(in SE) X, if you would like to try that one. Seems no issues.
