I'm like an old bull walrus when it comes to headphones.
-
- KVRian
- 548 posts since 5 Feb, 2004
I like a good tight seal. This is just what I got today. I just got home from Guitar Center, and have a new set of Sennheiser HD 280 PROs. I tried every set of phones they had at GC (which was most of the available studio makes and models), and the 280's were the only ones that completely fit comfortably over my large ears. Isolation is great. I can't even hear my wife screaming at me.
The sound is perfectly balanced across the freq spectrum, very clear, precise and accurate; and this is right out of the box. I'm sure they'll sound even better when broken in. As you can tell, I'm very happy with these cans. I've had them on now for over three hours and can hardly tell I'm wearing them. 
- KVRAF
- 5557 posts since 26 Apr, 2007 from Noosphere
That's what i've been using for 4 years already. The only downside is the softener (supporter) for the head, which in many occasions disconnecting... other than that it's a great peace of quality.
- KVRAF
- 8563 posts since 2 Aug, 2005 from Guitar Land, USA
Pics?
(with or without a fresh fish in your teeth)
The only site for experimental amp sim freeware & MIDI FX: http://runbeerrun.blogspot.com
https://m.youtube.com/channel/UCprNcvVH6aPTehLv8J5xokA -Youtube jams
https://m.youtube.com/channel/UCprNcvVH6aPTehLv8J5xokA -Youtube jams
-
- KVRian
- Topic Starter
- 548 posts since 5 Feb, 2004
Funny you should mention that. My old M40's finally broke, and I replaced them with the 280's. I would have gone with a new set of M40's, but the only thing that bothered me about them was the fact that my ears are like fruit bat wings, and they never quite fit correctly. However, you're probably right about the midrange. I really thought the overall sound of the M40's was excellent. Anyone with normal to small ears should really consider them.Igro wrote:However, today i bought Audio-Technica ATH-M40x and (around 75 Euro) and they are slightly better in mid-frequencies.
-
- KVRAF
- 2295 posts since 18 Oct, 2010 from Japan
I've been using the Senn280 PRO for....mmm, probably just like Igro, 4 years now. They haven't dissapointed in sound quality. Clamping force is a little bit high, though, after about an hour+ of wearing them I become incredibly aware of the glasses on my face thanks to the headphones painfully clamping them into my head.
Though it usually takes 2 hours before the pain becomes unbearable.
Though it usually takes 2 hours before the pain becomes unbearable.
- KVRAF
- 5557 posts since 26 Apr, 2007 from Noosphere
There are not that many excellent headphones at this price range (around 100 bucks), these are two of them, but many folks also using Sony MDR-7506 (i've never tried them)
-
- KVRian
- Topic Starter
- 548 posts since 5 Feb, 2004
I've noticed that the head support is not quite "cushy" enough. I'll probably go down to my local fabric store and buy a scrap of velor, a strip of soft foam, and some velcro and make a wrap for the band. Right now it's not really bothering me much, but I figure why not be totally comfortable for a couple of bucks and 10 min. of time?Igro wrote:That's what i've been using for 4 years already. The only downside is the softener (supporter) for the head, which in many occasions disconnecting... other than that it's a great peace of quality.
-
- KVRian
- Topic Starter
- 548 posts since 5 Feb, 2004
I tried the 7506's, but again there was the problem of them fitting my large ears. They're supposed to fit around the ears, but they set on top of my ears instead, didn't seal correctly, and were painful. However, they sound fine.Igro wrote:There are not that many excellent headphones at this price range (around 100 bucks), these are two of them, but many folks also using Sony MDR-7506 (i've never tried them)
-
- KVRian
- Topic Starter
- 548 posts since 5 Feb, 2004
Yes, they clamp tight, but I find the cups soft and comfortable, and the clamping force adds to the excellent seal, improving the isolation and overall sound. Concerning the glasses problem, I too wear glasses and find with any headphones I have to wear my glasses so that the stems sit on top of the headphones, instead of the top of my ears. It looks strange, but seems to work fine.ntom wrote:I've been using the Senn280 PRO for....mmm, probably just like Igro, 4 years now. They haven't dissapointed in sound quality. Clamping force is a little bit high, though, after about an hour+ of wearing them I become incredibly aware of the glasses on my face thanks to the headphones painfully clamping them into my head.
Though it usually takes 2 hours before the pain becomes unbearable.
-
- KVRAF
- 5666 posts since 23 Mar, 2006 from pendeLondonmonium
-
fluffy_little_something fluffy_little_something https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=281847
- Banned
- 12880 posts since 5 Jun, 2012
rcat wrote:I like a good tight seal. This is just what I got today. I just got home from Guitar Center, and have a new set of Sennheiser HD 280 PROs. I tried every set of phones they had at GC (which was most of the available studio makes and models), and the 280's were the only ones that completely fit comfortably over my large ears. Isolation is great. I can't even hear my wife screaming at me.The sound is perfectly balanced across the freq spectrum, very clear, precise and accurate; and this is right out of the box. I'm sure they'll sound even better when broken in. As you can tell, I'm very happy with these cans. I've had them on now for over three hours and can hardly tell I'm wearing them.
I also got those, got them like two months ago. First I thought they sounded a bit like a tin can, but someone said it is supposed to be that way in order to make details clearer. So it has a deliberate frequency bump. Still, I thought it was a bit too much.
Anyway, didn't use them in weeks, but they were always connected and thus playing whenever I listened to music on the speakers. Last night I wore them again, and they sounded so much better now than at the beginning
I already read that before I bought them, someone said in a review that they will sound better and better the older they get. And it seems he was right
I had the AT M50 before, and did not really expect the same sound quality from these ancient Sennheiser's, but I know now why they are still used so much in studios and made in the first place
I also like the way they fit my head, tight, but not unpleasant. Isolation is definitely better than with the M50's, maybe because the pad material is better and thicker. I don't have any problems with the clamping force, luckily.
I am actually thinking of getting another pair, this time the black version, just to have a spare pair in case they ever cease to make them
-
fluffy_little_something fluffy_little_something https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=281847
- Banned
- 12880 posts since 5 Jun, 2012
Maybe you should extend the headband a bit so that the top doesn't press against your head so hard.rcat wrote:I've noticed that the head support is not quite "cushy" enough. I'll probably go down to my local fabric store and buy a scrap of velor, a strip of soft foam, and some velcro and make a wrap for the band. Right now it's not really bothering me much, but I figure why not be totally comfortable for a couple of bucks and 10 min. of time?Igro wrote:That's what i've been using for 4 years already. The only downside is the softener (supporter) for the head, which in many occasions disconnecting... other than that it's a great peace of quality.
The headband is also replaceable by the way, which is cool
