[Article] - How to mix distorted guitars for Metal & Rock

How to do this, that and the other. Share, learn, teach. How did X do that? How can I sound like Y?
8 posts since 23 Feb, 2014 from Manchester, UK

Post Fri Dec 27, 2019 5:00 am

Original article: https://lightsoutkill.altervista.org/mi ... tars.html

In this article I’d like to share my tips on how to make heavy guitars coexist in a Metal / Djent & Rock mix.

Heavy distorted guitars in Metal / Djent and Rock music are not necessarily easy to blend in the mix as they occupy a lot of frequency space.

First things first, it’s extremely important to have a good source right at the beginning. This means, a good guitar player, a good guitar with new strings, a decent audio interface. These things might be obvious but you will seriously struggle in the mixing phase if you don’t get them right.

I like to apply a schematic approach when mixing guitars and going in the following order:

Guitar Tone ▶︎ Panning ▶︎ EQ ▶︎ Compression

[Guitar Tone] - This is relevant if you have clean guitar tracks and use VST plug-ins to emulate amps. If you are already working on microphoned guitar cabs, big part of the tone has been decided during the tracking session. However, there is still room for shaping that tone at a later stage.

Pick your trusted guitar amp simulator and start dialling a tone that sounds good to you. Pod Farm is a good option and you can find tons of presets out there.

As a good starting point, it's worth checking out these presets:

Ultimate Pod Farm Guitar Presets: https://youtu.be/A29vcR-n4Sg

Modern Metal Guitar Rig Tone: https://youtu.be/R16DjO-E5qc

[Panning] - As standard practice you want to pan the rhythm guitars in complete opposite directions, so you’ll have one rhythm guitar on the left and one the right. The position of lead guitars can vary but usually not very far from the centre. This is relevant for double tracked guitars. Quadruple tracked guitars will have to be positioned in a slightly different way. I personally prefer sticking to double tracked guitars.

[EQ] - This is where your ears will play a huge role, however there are some common steps to follow:

High Pass filter to cut the low frequency and give space to bass and kick drum. I tend to cut up to 100hz.

Low Pass filter to get rid of the very high frequencies. That’s around 10khz for me.

Then, there is an area between 4khz and 5khz that needs some attention. Reducing this range will noticeably make the guitar sound more polished and defined.

I like to use the Guitar Tone Definer to help with this process: https://youtu.be/rma30LTjJlY

[Compression] - Distorted guitars are already compressed by nature. I would just apply a multiband compressor on the low end to tighten it up. This will be beneficial during palm muted parts for example.

Make sure you listen to the guitars in solo when you are applying surgical EQ changes for example, but always listen to it in context straight after.

[TIP] - To give the guitars a final touch of definition, or to bring back to life a guitar with dull strings, it’s worth trying Master Shiner SH-1: https://youtu.be/B52Hladi8CY

I hope you’ll find this article useful and feel free to get in touch if you have any questions or need clarifications.
Last edited by AlexDiGuardo on Fri Dec 27, 2019 5:55 am, edited 2 times in total.

37 posts since 30 Jan, 2019 from Charleston, SC, USA

Post Fri Dec 27, 2019 5:33 am

Thanks for this. Distorted guitars have always been a big part of “my sound”, and I will reference this in the future.
I recently when thru a “Queens of the Stone Age” phase, in my listening habits, and found a YouTube video by SOS, featuring Eric Valentine who engineered their “Songs for the Deaf” recorded. I was struck by how much the lower-mids were pushed during the tracking. In every phase of the tracking chain the low-mids were repeatedly boosted, including a 10-band EQ pedal in front of the *bass* amp used, with the 250 and 500 bands heavily boosted. I really like the dense heavy tone they were able to achieve. I guess the takeaway is that experimenting with unorthodox techniques can lead to some cool unique tones.
Link for those interested

Return to “Production Techniques”