Speedrum updated to v1.3.1

Official support for: apisoniclabs.com
RELATED
PRODUCTS
User avatar
apisonic
KVRist
Topic Starter
132 posts since 19 Aug, 2020 from Croatia

Post Wed Aug 04, 2021 5:39 am

1.3.1
+ [Browser] toggle to autoload selected sample to active editor (like with Enter key)
# [Browser] fixed preview volume behavior for first preview after opening
# improved saving/loading of plugin state
# fixed not saving state in rare cases
# fixed loading saved state if the plugin was bypassed/disabled in the host
# dsp optimizations

1.3.0
+ Sends/Master tab
+ [Sends] Delay
+ [Sends] Reverb
+ [Sends] Direct output channel
+ [Master] Compressor
+ [Master] Clipper/Volume/Pan + meter
+ [Pad] Sends + Output section
+ [Pad] output volume (post FX)
+ [MIDI] new cc learn system for knobs (replacing the old one) - base on selected pad/layer
+ [MIDI] cc learn for layer knobs
+ [MIDI] cc messages can be received as absolute or relative
+ [Layers] respecting velocity ranges in all play modes ("V" button)
+ [Layers] new play mode - Random Exclusive (does not repeat the last)
+ [Layers] button to reset Round-Robins on all pads
+ [Browser] recognition of volumes (drives) without labels
+ [Knobs] option to hide mouse cursor on knobs (Preferences)
+ [Knobs] ability to enter values via the knob menu
+ [Knobs] touching a knob on a disabled section will enable that section
+ [Knobs] fine adjustment for the mouse wheel with shift key modifier
# [Layers] removed Velocity play mode (due to option to use it in all modes)
# [Drumkit] updated to v4 (breaking old automation from host!) with numerous changes/addons
# volume values changed to be in decibels
# fixed Pan knob behavior
# fixed copying pad with keyboard shortcuts
# fixed mute/solo state of layers when moving/copying layers/pads
# fixed velocity sliders visibility on UI reopening
# fixed Round-Robin play mode to start from the first layer
# [MacOS] fixed installation for 10.11 and older systems
# some dsp optimizations
# fixed some gui inconsistency
# fixed some licensing problems

1.2.3
# fixed random freeze when changing sample while playing
# improved saving state with AU format on some hosts
# [Linux] fixed rare crash when opening plugin GUI

v1.2.2
# fixed changing the sample causes the inability to control the layer
# fixed pad triggered from other pad does not respect layer play mode
# fixed Trigger from the right-click pad menu showing only 16 pads

v1.2.1
+ "Split (rise)" in Velocity editor menu
# improved Layer Play Mode system
# fixed split velocities sometimes didn’t work well
# fixed behavior of Round Robin and Random in Layer Play Mode
# fixed Layer Play Mode when pad is in Poly mode
# fixed possible crash when changing sample while pad is in Poly mode
# [Linux] fixed inability to change menu item

v1.2.0
+ [Pads] export render to file (with maximum velocity, ignore Humanization)
+ [Pads] the ability to replace Layers with rendered sample after exporting the render
+ [Pads] select multiple with mouse right-button drag, add to selection holding Ctrl/Command while dragging
+ [Pads] reset the Pad(s) with the middle-click
+ updated Pad main controls panel, added PlayMode and draggable waveform-button
+ [Windows, MacOS] drag waveform-button to export rendering to other Pad or outside Speedrum (DAW or folder)
+ [Linux] drag waveform-button to export rendering to other Pad
+ [Layer] Mute and Solo for Layers
+ [Layer] Shift + left/right click on a Layer button to Mute/Solo Layer(s) (same behavior as on Pads)
+ [Layer] Ctrl/Command + right-click on any layer button will select all layers
+ [Layer] delete the Layer(s) with the middle-clcik
+ [Layer] indicators when the mouse is over S/E and A/D, for better visibility of what is active
+ [Layer] move selection S/E left right with Alt/Option + drag
+ [Layer] holding Alt/Option while prev/next/rand in a folder will try to preserve S/E/A/D state
+ [Layer] render to file (ignore Pad params), with the option to reload rendered afterwards
+ [Setup] midi note number on the pad trigger button
+ [Setup] right-click on a trigger button to enter midi note number manually to all selected
+ [Setup] option to specify a project folder, used when drag&drop rendering to DAW (overrides Preferences)
+ [Preferences] option to specify default folder for intermediate files when drag&drop rendering to DAW or Pad/Layer
# left-click (without Ctrl/Command) on the Pad/Layer will remove Pads/Layers multi-selection
# updated info for S/E and A/D
# small dsp optimizations
# fixed right-arrow key behavior on folders in Browser
# fixed applying command from Pad's menu to multi-selection
# fixed Alt/Option + drag copying selected Layers to another Pad
# fixed crash when duplicating Layers with all slots already populated
# fixed crash when loading a corrupted drum-kit

v1.1.2
+ saving pad state even without layers to the drumkit for easily creating templates
+ more shortcuts for setting the number of output channels (main menu)
+ [Layer] envelope Attack/Decay states remain when toggle Slice
# more info for browser bottom controls
# fixed crash when clicking on empty Slicer after opening menu
# fixed distortion at the end of the slice in some cases

v1.1.1
+ stop all sound button
+ [Browser] Enter key will load selected drumkit
+ [Browser] Enter key will load sample/loop in visible tab (LAYERS or SLICER)
# [Browser] RightArrow key will preview selected sample/loop
# fixed showing that kit is changed after kit loading
# fixed Preferences panel blocks access to controls when open
# fixed Layer pitch behavior when Tiny Auto Fade is off
# fixed saving imported kits

v1.1.0
+ SLICER for slicing loops into individual drum hits, with Transients and BPM modes
+ [Layer] Slice mode (slice from selection)
+ [Layer] Export Slice as new wav sample file (optional reload)
+ [Layer] preview with click on a selected area
+ [Layer] channel mode for stereo samples - mono, left, right
+ [Layer] normalization - 0dB, -3dB, -6dB
+ [Layer] offset knob set to nonlinear and resolution to 0.01ms for fine-tuning
+ [Layer] double-click on a sample/loop name will open Browser and select that file
+ [Layer] autoplay on sample file change (prev/next/random)
+ [Layer] zoom to selected area with Alt/Option + double-click on a ruler
+ [Preferences] default pad color
+ [Preferences] Layer S/E Auto fade (default)
+ [Preferences] Midi number option on Show on Pads
+ [velocity editor] Invert
+ [velocity editor] Remove overlaps
+ [Browser] preview panel Auto switch
+ [Browser] preview audio channel
+ Size button for easier resizing
# [Layer] mouse click modifier to delete the layer, changed from Shift to Alt/Option
# improved overall stability
# improved saving drumkits with samples in case of different samples with same file names
# Preferences panel reorganized
# improved Browser drag&drop behavior
# improved Pads and Layers drag&drop behavior
# updated Pads drag&drop graphic
# layer velocity, phase and offset will no longer reset when replacing the sample
# removed pads humanization for layer preview
# improved drumkit change detection
# the activation window (demo) will only be displayed on the new instance
# fixed crash when reloading a kit with all pads having samples
# fixed Release knob state on Play Mode change
# fixed restore state for pad active layer number
# fixed pads multi-editing for VoiceMode, Trigger, Cut, CutBy
# fixed Layers multi-editing
# fixed maximum number of files that can be dropped on pads at once
# fixed color repaint to controls on reset pad
# fixed color repaint on Setup with multi-selection
# fixed knobs behavior when mouse buttons are swapped
# fixed setting of active layer if files are missing when loading drumkit
# fixed cut off layer preview when the pad play start
# [Linux] fixed saving drumkit with the file extension

v1.0.7
+ [Preferences] toggle for play pad on click
+ [Preferences] toggle for preview layer on click
# improved pads drag&drop (probably fixed crash on Linux)
# improved search for missing sample files
# changed mod key for mute/solo (+ click on Pad) to Shift
# fixed layers multi-selection behavior after swap
# fixed pad name not refreshed after prev/next/random
# [Linux] - fixed not using .config folder for some settings files
# [MacOS/Linux] - fixed sample files in active folder not alphabetically sorted for prev/next

v1.0.6
+ "Note On" PlayMode, PlayMode can be changed from pad's right-click menu
+ Release knob for pad's Volume envelope, enabled in "Note On" PlayMode
+ save kit button, enabled if kit was changed
+ Alt/Option + left (right) click on a Pad will mute (solo) selected pads
+ option to open sample file in the external audio editor
+ button to reload sample file
+ button to load random sample file from current folder
# improved moving/adding the layer(s)
# fixed gui colors if multiple instances of a plugin was loaded

v1.0.5
+ ctrl/command + click on a layout button ( A / B / AB ) selects all pads from that layout
+ MIDI-IN LED indicator in the header
# improved multi-selection copy/swap
# improved Speedrum Lite drum kit import
# improved Poise drum kit import
# fixed "Select Pad With MIDI Note" behavior

v1.0.4
+ delete layer(s) with shift + click on a layer button (number)
# improved layer sample audio preview
# fixed cutting the pads with different layer modes

v1.0.3
+ DEMO indication
# fixed random crash during layer operations
# minor gui improvements

v1.0.2
# fixed some licensing issues

v1.0.1
# fixed crash on pad drag&drop for certain layer play modes
# fixed ring mod behaviour

v1.0.0
initial version

User avatar
apisonic
KVRist
Topic Starter
132 posts since 19 Aug, 2020 from Croatia

Post Sun Aug 08, 2021 10:00 am

v1.0.5
+ added ctrl/command + click on a layout button (A/B/AB) selects all pads from that layout
+ added MIDI-IN LED indicator in the header
# improved multi-selection copy/swap
# improved Speedrum Lite drum kit import
# improved Poise drum kit import
# fixed "Select Pad With MIDI Note" behavior

User avatar
apisonic
KVRist
Topic Starter
132 posts since 19 Aug, 2020 from Croatia

Post Sat Aug 14, 2021 7:34 am

v1.0.6
+ added "Note On" PlayMode, PlayMode can be changed from pad's right-click menu
+ added Release knob for pad's Volume envelope, enabled in "Note On" PlayMode
+ added save kit button, enabled if kit was changed
+ added alt/option + left (right) click on a Pad will mute (solo) selected pads
+ added option to open sample file in the external audio editor
+ added button to reload sample file
+ added button to load random sample file from current folder
# improved moving/adding the layer(s)
# fixed gui colors if multiple instances of a plugin was loaded

User avatar
frankpain
KVRist
64 posts since 14 Aug, 2006

Post Sat Aug 14, 2021 10:47 am

:tu:

sinkmusic
KVRAF
6713 posts since 28 Apr, 2004 from france

Post Sat Aug 14, 2021 11:05 am

Thank you for the update, it's much appreciated !

User avatar
apisonic
KVRist
Topic Starter
132 posts since 19 Aug, 2020 from Croatia

Post Mon Aug 30, 2021 7:05 am

v1.0.7
+ preferences - added toggle for play pad on click
+ preferences - added toggle for preview layer on click
# improved pads drag&drop (probably fixed crash on Linux)
# improved search for missing sample files
# changed mod key for mute/solo (+ click on Pad) to Shift
# fixed layers multi-selection behavior after swap
# fixed pad name not refreshed after prev/next/random
# Linux - fixed not using .config folder for some settings files
# Mac/Linux - fixed sample files in active folder not alphabetically sorted for prev/next

User avatar
apisonic
KVRist
Topic Starter
132 posts since 19 Aug, 2020 from Croatia

Post Mon Oct 25, 2021 1:13 pm

v1.1.0
+ SLICER for slicing loops into individual drum hits, with Transients and BPM modes
+ [Layer] Slice mode (slice from selection)
+ [Layer] Export Slice as new wav sample file (optional reload)
+ [Layer] preview with click on a selected area
+ [Layer] channel mode for stereo samples - mono, left, right
+ [Layer] normalization - 0dB, -3dB, -6dB
+ [Layer] offset knob set to nonlinear and resolution to 0.01ms for fine-tuning
+ [Layer] double-click on a sample/loop name will open Browser and select that file
+ [Layer] autoplay on sample file change (prev/next/random)
+ [Layer] zoom to selected area with Alt/Option + double-click on a ruler
+ [Preferences] default pad color
+ [Preferences] Layer S/E Auto fade (default)
+ [Preferences] Midi number option on Show on Pads
+ [velocity editor] Invert
+ [velocity editor] Remove overlaps
+ [Browser] preview panel Auto switch
+ [Browser] preview audio channel
+ Size button for easier resizing
# [Layer] mouse click modifier to delete the layer, changed from Shift to Alt/Option
# improved overall stability
# improved saving drumkits with samples in case of different samples with same file names
# Preferences panel reorganized
# improved Browser drag&drop behavior
# improved Pads and Layers drag&drop behavior
# updated Pads drag&drop graphic
# layer velocity, phase and offset will no longer reset when replacing the sample
# removed pads humanization for layer preview
# improved drumkit change detection
# the activation window (demo) will only be displayed on the new instance
# fixed crash when reloading a kit with all pads having samples
# fixed Release knob state on Play Mode change
# fixed restore state for pad active layer number
# fixed pads multi-editing for VoiceMode, Trigger, Cut, CutBy
# fixed Layers multi-editing
# fixed maximum number of files that can be dropped on pads at once
# fixed color repaint to controls on reset pad
# fixed color repaint on Setup with multi-selection
# fixed knobs behavior when mouse buttons are swapped
# fixed setting of active layer if files are missing when loading drumkit
# fixed cut off layer preview when the pad play start
# [Linux] fixed saving drumkit with the file extension

sinkmusic
KVRAF
6713 posts since 28 Apr, 2004 from france

Post Mon Oct 25, 2021 1:20 pm

Very nice update!
Thank you

functionform
KVRian
652 posts since 13 May, 2017 from Virginia

Post Mon Oct 25, 2021 6:12 pm

This is a phenomenal update thank you so much! I'm going to start spreading the word about this great plug. I love how you did the loop slicer workflow - it's so quick and all very easily visual at the same time. I got my kick nice and mono from a stereo sample, all within the same plugin in seconds. Can't be understated how user friendly this is. Thank you again!!!

User avatar
frankpain
KVRist
64 posts since 14 Aug, 2006

Post Tue Oct 26, 2021 6:23 am

Installed and updated speedrum version loaded in DAW with no issue. :party: yeah buddy

User avatar
apisonic
KVRist
Topic Starter
132 posts since 19 Aug, 2020 from Croatia

Post Tue Oct 26, 2021 10:16 am

functionform wrote: Mon Oct 25, 2021 6:12 pm This is a phenomenal update thank you so much! I'm going to start spreading the word about this great plug. I love how you did the loop slicer workflow - it's so quick and all very easily visual at the same time. I got my kick nice and mono from a stereo sample, all within the same plugin in seconds. Can't be understated how user friendly this is. Thank you again!!!
Thanks, spreading the word is always appreciated :)

User avatar
Guenon
KVRAF
1837 posts since 17 Jun, 2005

Post Wed Oct 27, 2021 4:06 am

Heh, I noticed the update email, and I just checked out the slicer, figured I'd mangle a few amens on it and see how it behaves... and got totally lost in the moment, it's hard to describe but you managed to do things so right with this one it's crazy :D ... Seriously, I have quite a bit of experience on different samplers and trackers and whatnot, starting from the 90s, hah, and I recently bought Speedrum, frankly just as "some random Battery replacement that also works natively on Linux if I'm so inclined" - but I've completely changed my view on it, and it will probably be my go-to for these kinds of things on any platform now. Already in version 1.1.0 it's super super well done, gets all the core functionality so spot on, and is a joy to use. Thank you!

User avatar
frankpain
KVRist
64 posts since 14 Aug, 2006

Post Wed Oct 27, 2021 10:56 am

gets all the core functionality so spot on

Agree 100%

User avatar
apisonic
KVRist
Topic Starter
132 posts since 19 Aug, 2020 from Croatia

Post Wed Oct 27, 2021 12:39 pm

Guenon wrote: Wed Oct 27, 2021 4:06 am Heh, I noticed the update email, and I just checked out the slicer, figured I'd mangle a few amens on it and see how it behaves... and got totally lost in the moment, it's hard to describe but you managed to do things so right with this one it's crazy :D ... Seriously, I have quite a bit of experience on different samplers and trackers and whatnot, starting from the 90s, hah, and I recently bought Speedrum, frankly just as "some random Battery replacement that also works natively on Linux if I'm so inclined" - but I've completely changed my view on it, and it will probably be my go-to for these kinds of things on any platform now. Already in version 1.1.0 it's super super well done, gets all the core functionality so spot on, and is a joy to use. Thank you!
Thank you :D
I guess most who see it or hear about it think just that "some random Battery replacement...", and then don't even try it ...
I don't know, but I don't like aggressive advertising, so it certainly won't be.
But that’s why I thank everyone who spreads the word :wink:

User avatar
apisonic
KVRist
Topic Starter
132 posts since 19 Aug, 2020 from Croatia

Post Wed Oct 27, 2021 12:42 pm

v1.1.1
+ stop all sound button
+ [Browser] Enter key will load selected drumkit
+ [Browser] Enter key will load sample/loop in visible tab (LAYERS or SLICER)
# [Browser] RightArrow key will preview selected sample/loop
# fixed showing that kit is changed after kit loading
# fixed Preferences panel blocks access to controls when open
# fixed Layer pitch behavior when Tiny Auto Fade is off
# fixed saving imported kits

Return to “Apisonic Labs”