Manuel I applaud you and Rene I just found the invert bottom and wow this makes my leads cut through even better than I thought thank you
VPS Avenger 2.1 [RELEASED - FAQ in OP]
-
Echoes in the Attic Echoes in the Attic https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=180417
- KVRAF
- 11054 posts since 12 May, 2008
Yes I probably will, though I figured it would be more helpful if it was posted here in case someone ever searched the thread to find the answer (as I did).zvenx wrote: ↑Fri Mar 15, 2024 11:39 pm Might be a better use of your time to just email support and ask them.
I think you have asked here a few times without a response.
https://www.vengeance-sound.com/support.php
rsp
- KVRAF
- 13226 posts since 16 Feb, 2005 from Kingston, Jamaica
True, but would be nice indeed if you post their response (if you can).
I don't remember why but I seem to recall a year or two ago before v2 was even released that there wont be a demo in future.
rsp
I don't remember why but I seem to recall a year or two ago before v2 was even released that there wont be a demo in future.
rsp
sound sculptist
- KVRAF
- 2468 posts since 18 Apr, 2011
the loop only works with your own custom samples, which you have drag and dropped in to the GUI... it does not work on factory multisamples. They are all perfectly looped already btw.
making no demo has several reasons
- since 2.0 its a huge fact. content file (traffic!!) (and we dont want to include only a handful presets, since this creates a wrong picture)
- piracy
- support
making no demo has several reasons
- since 2.0 its a huge fact. content file (traffic!!) (and we dont want to include only a handful presets, since this creates a wrong picture)
- piracy
- support
http://www.vengeance-sound.com
join our VPS AVENGER usergroup on FB: https://tinyurl.com/y99jurk9
join our reFX NEXUS usergroup on FB:https://tinyurl.com/tc5o9x7
https://www.youtube.com/vengeancesound
join our VPS AVENGER usergroup on FB: https://tinyurl.com/y99jurk9
join our reFX NEXUS usergroup on FB:https://tinyurl.com/tc5o9x7
https://www.youtube.com/vengeancesound
-
- KVRist
- 260 posts since 30 Mar, 2019
that's a bit cocky. I searched for a sample for like 20 minutes for a sample for this lead synth to play the arpeggio melody, then I finally found one I liked. I set Pitch to legato to use as a lead in the arp. When I did that the timbre changed drastically because the sample was <1 second and notes were sustained from the legato (rather than every note retriggering the sample), so the loop was at a point in the short sample that I did not like at the tail end of the sample, and wanted to adjust loop points to be early in the sample where the timbre sounded right. Ultimately it didn't matter that much but I was kind of confused why it wasn't possible, but I spent like an hour trying to figure out if I was missing something.
kind of a minor criticism. Avenger was the centerpiece of the whole track, probably the best sounding VST synthesizer. no idea why, it just sounds amazing.
this is the track i made
-
- KVRist
- 260 posts since 30 Mar, 2019
sorry for ruining the thread lol (if I did). feel free to shit on my music. the sound quality, preset quality, arpeggiator and all around "vibe" of avenger has made it my new bread and butter, probably for years to come
-
- KVRian
- 1058 posts since 18 Dec, 2007
My first time properly using V2 (2.0.6) in a track today. The CPU is going fkn crazy when the track is idle, spiking to almost 100% every few seconds. It does NOT do it if I have the UI open, only if the UI is closed. I just added 3 new expansions yesterday too, yay for fkn me.
Manuel, who's beta testing this on mac? I've offered to beta test a hundred times now but Andre hasn't sent me anything.
Manuel, who's beta testing this on mac? I've offered to beta test a hundred times now but Andre hasn't sent me anything.
-
- KVRAF
- Topic Starter
- 5453 posts since 25 Jan, 2007
I can't recall anyone reporting ONLY getting spiking if the UI is closed. Best contact Andre one more time.m-ac wrote: ↑Sat Mar 23, 2024 6:23 pm My first time properly using V2 (2.0.6) in a track today. The CPU is going fkn crazy when the track is idle, spiking to almost 100% every few seconds. It does NOT do it if I have the UI open, only if the UI is closed. I just added 3 new expansions yesterday too, yay for fkn me.
Manuel, who's beta testing this on mac? I've offered to beta test a hundred times now but Andre hasn't sent me anything.
http://www.guyrowland.co.uk
http://www.sound-on-screen.com
W10, i7 7820X, 64gb RAM, RME Babyface, 1050ti, PT 2023 Ultimate, Cubase Pro 13
Macbook Air M2 OSX 10.15
http://www.sound-on-screen.com
W10, i7 7820X, 64gb RAM, RME Babyface, 1050ti, PT 2023 Ultimate, Cubase Pro 13
Macbook Air M2 OSX 10.15
- KVRAF
- 2468 posts since 18 Apr, 2011
no I am sorry, this would cause too many problems with ratched, strums etc
You have to use the Humanize dial instead
http://www.vengeance-sound.com
join our VPS AVENGER usergroup on FB: https://tinyurl.com/y99jurk9
join our reFX NEXUS usergroup on FB:https://tinyurl.com/tc5o9x7
https://www.youtube.com/vengeancesound
join our VPS AVENGER usergroup on FB: https://tinyurl.com/y99jurk9
join our reFX NEXUS usergroup on FB:https://tinyurl.com/tc5o9x7
https://www.youtube.com/vengeancesound
- KVRAF
- 2895 posts since 3 Jul, 2022
The song is actually really good (but loooong) any chance to publish it on Spotify or Tidal?mxbf wrote: ↑Sun Mar 17, 2024 12:19 amthat's a bit cocky. I searched for a sample for like 20 minutes for a sample for this lead synth to play the arpeggio melody, then I finally found one I liked. I set Pitch to legato to use as a lead in the arp. When I did that the timbre changed drastically because the sample was <1 second and notes were sustained from the legato (rather than every note retriggering the sample), so the loop was at a point in the short sample that I did not like at the tail end of the sample, and wanted to adjust loop points to be early in the sample where the timbre sounded right. Ultimately it didn't matter that much but I was kind of confused why it wasn't possible, but I spent like an hour trying to figure out if I was missing something.
kind of a minor criticism. Avenger was the centerpiece of the whole track, probably the best sounding VST synthesizer. no idea why, it just sounds amazing.
this is the track i made
Clearly a track from a tasteful person using Avenger 2 haha
-
- KVRist
- 337 posts since 28 Jun, 2017
Hey Manuel I purchased the generative 1 expansion and I saw how we had to route the random lfo to the step sequencer. Can you and Rene add a random start bottom dial on the step sequencer thanks
-
kenny saunders kenny saunders https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=441077
- KVRist
- 312 posts since 16 May, 2019
I've just got ver 2 and a bunch of exps and I am finding some of the presets when I disable the arps/ step seq, still don't play the right midi notes for some reason I think say in one octave if I go up the octave the notes at the top of the octave with be the right notes but just and octave too low eg. (C3,D3 E3,F3,G2, A2,B2) Is there a setting I am missing?
If you don't eat yer meat, you can't have any pudding. HOW CAN YOU HAVE ANY PUDDING IF YOU DON'T EAT YER MEAT!?
- KVRAF
- 2468 posts since 18 Apr, 2011
OSC Voicing Tab, Midi Special Mode, Turn of Endless Sub Mode
http://www.vengeance-sound.com
join our VPS AVENGER usergroup on FB: https://tinyurl.com/y99jurk9
join our reFX NEXUS usergroup on FB:https://tinyurl.com/tc5o9x7
https://www.youtube.com/vengeancesound
join our VPS AVENGER usergroup on FB: https://tinyurl.com/y99jurk9
join our reFX NEXUS usergroup on FB:https://tinyurl.com/tc5o9x7
https://www.youtube.com/vengeancesound
-
kenny saunders kenny saunders https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=441077
- KVRist
- 312 posts since 16 May, 2019