robot vocal phrase generator VSTi
-
- KVRian
- 1440 posts since 16 Jul, 2003 from Zwollywood, The Netherlands (Europe)
'use the lower keys to play the words (1-12) and the higher ones to apply a target pitch (or create singing/chords and stuff)'
So, if I only play the low notes, I should already hear something, or do you need to play a low and high note together? The low one for the choice of the word/sound and the high one for the pitch?
So, if I only play the low notes, I should already hear something, or do you need to play a low and high note together? The low one for the choice of the word/sound and the high one for the pitch?
-- Regards MrM --
-
- KVRAF
- 7936 posts since 18 Feb, 2003 from out there somewhere
it works here. If you play a low note you just here the corresponding word, if you then play a higher note at the same time, it sounds vocoded.
Not bad, quite good fun, but personally not much use to me, sorry...
Not bad, quite good fun, but personally not much use to me, sorry...
-
- Banned
- 12367 posts since 30 Apr, 2002 from i might peeramid
listened to demo, sounds ~chewed up. use the mda talkbox ( 
) a lt so hear that.. you're using a dh granulator in there??
if high cpu, you got all yer waves on 1 file, then you can flipflop 2 dhwp2 mods to concatenate, save some cpu? :p
) a lt so hear that.. you're using a dh granulator in there??if high cpu, you got all yer waves on 1 file, then you can flipflop 2 dhwp2 mods to concatenate, save some cpu? :p
you come and go, you come and go. amitabha neither a follower nor a leader be tagore "where roads are made i lose my way" where there is certainty, consideration is absent.
-
- KVRAF
- Topic Starter
- 3944 posts since 7 May, 2004 from behind his workbench
nope works using dh´s waveplayer2. i just play small grains and modulate them via LFO for speed and stuff... 
yeah i have to think about a way to save cpu.
switching the filename (textfile) upon keypress reacts to slow
yeah i have to think about a way to save cpu.
switching the filename (textfile) upon keypress reacts to slow
-
- KVRAF
- 1891 posts since 9 Oct, 2004 from Columbus,Ohio
Ahh, i've anticipated this plug in for months now
"You are going to let the fear of poverty govern your life and your reward will be that you will eat, but you will not live."
-
- KVRAF
- Topic Starter
- 3944 posts since 7 May, 2004 from behind his workbench
bytheway, xoxos: your fdn based thingies are cool! any chance to see how you have to set up a basic fdn? still stuck with it 
cant get it to do anything 
cant get it to do anything -
- KVRAF
- Topic Starter
- 3944 posts since 7 May, 2004 from behind his workbench
erm... *BUMP*
*bump*bump*bump* 
*bump*bump*bump* -
- Banned
- 12367 posts since 30 Apr, 2002 from i might peeramid
sorry mang im in a different time scale atm
i remembered you sayin something about using a buncha wp modules sometime back; dunno if you did it that way, but if so, you could make all yr. vowels 400 samples long and then 'frame' between them as one sample on one module, uses less cpu in wp modules. then again, wpuldn't be surprised if you did it that way, granulators et c. just aren't light processes.
fdns, can pull an example together if you need, but the key to them is that no "row" or "column" of feedback vals (eg. all fdbk going to 1, or all fdbk going from 1 to 2,3,4) sums over 10, or you'll get "the howl" :p
might help to sketch a diagram of the 'channels' in your model to get a picture of the delay time vals.. trick with mine is that since max. # of delay channels = 4 i ~'jimmy' some of it together to approximate arrangements that would require more paths.
pm me if you like :p nothing i can show you that isn't 'out there,' but fwiw. i am using a very old beta of se so will have a hard time opening other peoples' files :p
i remembered you sayin something about using a buncha wp modules sometime back; dunno if you did it that way, but if so, you could make all yr. vowels 400 samples long and then 'frame' between them as one sample on one module, uses less cpu in wp modules. then again, wpuldn't be surprised if you did it that way, granulators et c. just aren't light processes.
fdns, can pull an example together if you need, but the key to them is that no "row" or "column" of feedback vals (eg. all fdbk going to 1, or all fdbk going from 1 to 2,3,4) sums over 10, or you'll get "the howl" :p
might help to sketch a diagram of the 'channels' in your model to get a picture of the delay time vals.. trick with mine is that since max. # of delay channels = 4 i ~'jimmy' some of it together to approximate arrangements that would require more paths.
pm me if you like :p nothing i can show you that isn't 'out there,' but fwiw. i am using a very old beta of se so will have a hard time opening other peoples' files :p
you come and go, you come and go. amitabha neither a follower nor a leader be tagore "where roads are made i lose my way" where there is certainty, consideration is absent.
-
- KVRAF
- 2935 posts since 14 Dec, 2003 from Edinburgh
my god I understood all of that apart from the tech stuffxoxos wrote:sorry mang im in a different time scale atm
i remembered you sayin something about using a buncha wp modules sometime back; dunno if you did it that way, but if so, you could make all yr. vowels 400 samples long and then 'frame' between them as one sample on one module, uses less cpu in wp modules. then again, wpuldn't be surprised if you did it that way, granulators et c. just aren't light processes.
fdns, can pull an example together if you need, but the key to them is that no "row" or "column" of feedback vals (eg. all fdbk going to 1, or all fdbk going from 1 to 2,3,4) sums over 10, or you'll get "the howl" :p
might help to sketch a diagram of the 'channels' in your model to get a picture of the delay time vals.. trick with mine is that since max. # of delay channels = 4 i ~'jimmy' some of it together to approximate arrangements that would require more paths.
pm me if you like :p nothing i can show you that isn't 'out there,' but fwiw. i am using a very old beta of se so will have a hard time opening other peoples' files :p
-
- KVRAF
- Topic Starter
- 3944 posts since 7 May, 2004 from behind his workbench
so what do the others think about this new and revolutionary new robot vocal phrase generation phrase application designing vst? 
-
- KVRAF
- 4867 posts since 18 Dec, 2000
-
- KVRAF
- Topic Starter
- 3944 posts since 7 May, 2004 from behind his workbench
@william: exactly!
@MrM: thanks - yes, will have to work on the cpu usage
@MrM: thanks - yes, will have to work on the cpu usage
-
- KVRAF
- 4867 posts since 18 Dec, 2000