Hi. My midi and audio inputs both suddenly stopped working! Nothing wrong with the sound card (Audiophile 2496) or midi interface, as both work fine in energyXT. I've tried restarting the computer and T2, resetting ASIO and midi ports, opening old edits and new ones. Can't reinstall right now, as I cannot access the download page due to the server error (see another thread).
Any ideas?
inputs suddenly stopped working
-
- KVRist
- 76 posts since 31 Jan, 2003 from Outer Bongolia
-
- KVRAF
- 10815 posts since 26 Nov, 2004 from UK
install file is in the tracktion 2 folder!!!
probley @
c:\program files\tracktion2\setup\tracktionsetup.exe
install it ontop of its self & report back with more info if you can
Subz
probley @
c:\program files\tracktion2\setup\tracktionsetup.exe
install it ontop of its self & report back with more info if you can
Subz
-
- KVRAF
- 6490 posts since 14 Jun, 2004 from Rochester, NY
-
- KVRAF
- 2495 posts since 18 May, 2004 from ATL-USA
This mysteriously happened to me one day too, but I have an Aardvark Q10. I did have one input and when I looked in T's settings, the input names were very strange:
Aardvark 3,4 Input 1 Enabled
Aardvark 3,4 Input 2
Aardvark 3,4 Input 1
Aardvark 3,4 Input 2
Aardvark 5,6 Input 1
Aardvark 5,6 Input 2
(I tried to enable the other multiple inputs with no success.)
It should look like this:
Aardvark 1,2 Input 1 Enabled
Aardvark 1,2 Input 2 Enabled
Aardvark 3,4 Input 1 Enabled
Aardvark 3,4 Input 2 Enabled
Aardvark 5,6 Input 1 Enabled
....etc, etc.
I figured my Aardvark had crashed and decided to reboot. After reboot, I restarted the device, in Tracktion, and everything seemed back to normal. But, that was only a coupla weeks ago, so my fingers are still crossed.
Aardvark 3,4 Input 1 Enabled
Aardvark 3,4 Input 2
Aardvark 3,4 Input 1
Aardvark 3,4 Input 2
Aardvark 5,6 Input 1
Aardvark 5,6 Input 2
(I tried to enable the other multiple inputs with no success.)
It should look like this:
Aardvark 1,2 Input 1 Enabled
Aardvark 1,2 Input 2 Enabled
Aardvark 3,4 Input 1 Enabled
Aardvark 3,4 Input 2 Enabled
Aardvark 5,6 Input 1 Enabled
....etc, etc.
I figured my Aardvark had crashed and decided to reboot. After reboot, I restarted the device, in Tracktion, and everything seemed back to normal. But, that was only a coupla weeks ago, so my fingers are still crossed.
Anti-aliasing is for "synthmonk%ys".
-
- KVRist
- Topic Starter
- 76 posts since 31 Jan, 2003 from Outer Bongolia
Tried to reinstall just now, everything is seemingly back to normal.
-
- KVRist
- 131 posts since 7 Sep, 2004 from SF Bay Area
This happened to me with my Creamware Pulsar too. I reinstalled the Creamware software *and* Tracktion 2.0.1.13, and the problem went away. But then it reappeared, and I reinstalled the Creamware software to fix it. Things stayed OK for two sessions, then I had to do it again. This was a week and a half ago, and things have been fine since then.
No idea why this would occur.
No idea why this would occur.
-
- KVRian
- 779 posts since 3 Apr, 2003 from UK
I had something similar with the latest drivers for the Emu 0404 - worked for a while but then nothing worked (although in my case it appeared to be a system-wide problem not just Tracktion). Reinstalling the previous driver version cured it.
-
- KVRAF
- 6490 posts since 14 Jun, 2004 from Rochester, NY
0 problems here with firepod (so far), intensive recordings, etc as well
RONC
RONC