How to solve this stuffed nose vocal
-
- KVRist
- 267 posts since 11 Sep, 2005
Hello,
I'm working in this vocal track, and I'm applying redunoise to get it much cleaner (it's a little noisy).
The problem is that I get absolutely lovely - no noise - vocal, but it sounds like the singer has a stuffed nose - unnatural.
I tried to correct 1-2 KHz bands, and the problem went away, but it then sounds muffled.
Should I go with a warmer effect or what?
Thanks in advance!
I'm working in this vocal track, and I'm applying redunoise to get it much cleaner (it's a little noisy).
The problem is that I get absolutely lovely - no noise - vocal, but it sounds like the singer has a stuffed nose - unnatural.
I tried to correct 1-2 KHz bands, and the problem went away, but it then sounds muffled.
Should I go with a warmer effect or what?
Thanks in advance!
- KVRist
- 352 posts since 8 Jul, 2003
less noise reducation, proper EQ, compressor and exciter. and as last resort, re-record the vocals so that you have better material to start with.
jouni - www.markvera.net - Stardrive Studio - Orionology
- Rad Grandad
- 38041 posts since 6 Sep, 2003 from Downeast Maine
is the noise reduced parts all you have? Or did you save a copy of the vocals before noise reduction? You might want to try using something like voxformer first then using noise reduction. Try to be careful when reducing the noise. Also make sure all the noise reduction is really needed...when it's in the mix do you hear it or does it fade into the mix? I love voxengo, but I use adobe auditions noise reduction, which imo is quite good...
The highest form of knowledge is empathy, for it requires us to suspend our egos and live in another's world. It requires profound, purpose‐larger‐than‐the‐self kind of understanding.
-
- KVRist
- Topic Starter
- 267 posts since 11 Sep, 2005
The voice has something like grain in it. I'm taking the minimum amount of noise as possible.
I just need a fuller voice and crispy voice because no eq applyed solves it. Warmifier doensn't seem to help.

I just need a fuller voice and crispy voice because no eq applyed solves it. Warmifier doensn't seem to help.
- Rad Grandad
- 38041 posts since 6 Sep, 2003 from Downeast Maine
have you tried voxformer? It's eq and presence sections could well be what you're looking for...
The highest form of knowledge is empathy, for it requires us to suspend our egos and live in another's world. It requires profound, purpose‐larger‐than‐the‐self kind of understanding.
-
- KVRian
- 541 posts since 19 Jun, 2002 from London, UK
Daft question, but what kind of mic were you using, and how close was the singer to it? I was always taught the best way to avoid stuffy nose was to sing about 12-18 inches away from the mic...
Three shall be the number of the counting
And the number of the counting shall be three.
And the number of the counting shall be three.
-
- KVRist
- Topic Starter
- 267 posts since 11 Sep, 2005
Actually this appends every time I perform a noise clean (also with professional recordings). Even with X-noise there's this sound of stuffy nose as well has on other instruments too.
Any ideas?
Any ideas?
-
- KVRist
- 73 posts since 15 Oct, 2004
-
- KVRAF
- 8389 posts since 11 Apr, 2003 from back on the hillside again - but now with a garden!
I have had this - do a fine vocal take, then noise remove, and it goes stuffy (I use the noise remover in audacity, on it's weakest setting).
I have found that using a multiband (like T-Sledge) better than a simple compressor (I think the noise remover does odd things up around 8-10kHz, which make the compressor behave in an odd way).
I'm not very good at spending money on this kind of thing, so only use freeware, but a carefully tweaked chain of noise-remove->multiband->EQ (I found gentle wide Q boost around 5k helped more than 1-2k)
HTH
DSP
I have found that using a multiband (like T-Sledge) better than a simple compressor (I think the noise remover does odd things up around 8-10kHz, which make the compressor behave in an odd way).
I'm not very good at spending money on this kind of thing, so only use freeware, but a carefully tweaked chain of noise-remove->multiband->EQ (I found gentle wide Q boost around 5k helped more than 1-2k)
HTH
DSP
-
- KVRist
- 459 posts since 30 Jul, 2002 from netherlands
I really wonder why noone has remarked this yet but; if your recording is so noisy you have to apply redunoise you're really doing something wrong at the source.
What kind of mic did you use ? And do you maybe have an mp3 of the recording so we can hear it ?
What kind of mic did you use ? And do you maybe have an mp3 of the recording so we can hear it ?
-
- KVRAF
- 5629 posts since 22 Sep, 2005
pluginnow this is one of those touch issues that really is hard to fix (especially for free).. I've gotten success with noise vocals by using frequency domain filtering.. also anaylizing the noise taking a sample of it and reducing directly.. if you can try it in stages with a higher release then repeat the process until you reach the desired effect.. I use Audition 1.5 frequency domain ($).. You can try audacity..
http://audacity.sourceforge.net/
C
http://audacity.sourceforge.net/
C
-
- KVRAF
- 8389 posts since 11 Apr, 2003 from back on the hillside again - but now with a garden!
For me it comes from using the sound card in my laptop. I do have an external USB box as well, but don't always have it around. My internal card picks up the low level noise of the whole machine, which is a pain, but I've learnt how to get the best from it allmonopoli wrote:I really wonder why noone has remarked this yet but; if your recording is so noisy you have to apply redunoise you're really doing something wrong at the source.
What kind of mic did you use ? And do you maybe have an mp3 of the recording so we can hear it ?
DSP

