kudos, mr Jack !
Thank you very much
Oatmeal 38-1 (hacky unison added)
-
- KVRAF
- 7028 posts since 28 Apr, 2004 from france
-
- KVRist
- 493 posts since 20 Mar, 2006
GrymmJack, you're awesome!! Thanks a lot man, and thanks for the default bank tip.
-
- Banned
- 22457 posts since 5 Sep, 2001
[DELETED]
-
- KVRAF
- 8519 posts since 7 Apr, 2003
thank beatslaughter for the bank tip 
he and i were talking on IM and i asked him if he knew if i could hexedit the DLL to make a new bank inside, that's when he found out the oatmealprs.dat trick (thanks alex)
ttoz; the arp bug is simple to see, right click a arp step and choose all of the options, do they all make sense? i cant figure out what i'm doing wrong in my skin but sometimes the random step type shows up where it shouldn't and sometimes the other steps are offset by 1 slot.
a guy emailed me and said he fixed it, but i cant for the life of me find the email and so i'm bummed out. i was hoping to include his fix into the new versions of the skins but unless he pops in here, i have no way to get ahold of him nor can i find the messages he sent me. i cant remember if he did it with email, or IM, or what and so i'm out of luck there.
i'd fix it if i could understand wtf is going on but everything seems to be setup properly in the oms file and the graphics both. it drove me a little insane earlier. no time now to deeply dive in and try harder got work to do for job but it's frustrating.
it's fine as long as you dont do anything with the last 3 or 4 arp steps
he and i were talking on IM and i asked him if he knew if i could hexedit the DLL to make a new bank inside, that's when he found out the oatmealprs.dat trick (thanks alex)ttoz; the arp bug is simple to see, right click a arp step and choose all of the options, do they all make sense? i cant figure out what i'm doing wrong in my skin but sometimes the random step type shows up where it shouldn't and sometimes the other steps are offset by 1 slot.
a guy emailed me and said he fixed it, but i cant for the life of me find the email and so i'm bummed out. i was hoping to include his fix into the new versions of the skins but unless he pops in here, i have no way to get ahold of him nor can i find the messages he sent me. i cant remember if he did it with email, or IM, or what and so i'm out of luck there.
i'd fix it if i could understand wtf is going on but everything seems to be setup properly in the oms file and the graphics both. it drove me a little insane earlier. no time now to deeply dive in and try harder got work to do for job but it's frustrating.
it's fine as long as you dont do anything with the last 3 or 4 arp steps
-
Reverse Engineer Reverse Engineer https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=9129
- KVRAF
- 4968 posts since 23 Sep, 2003 from Glasgow
Are any of these gonna come out in the large size?grymmjack wrote:oh last thing- all flavors are updated; blueberry, slate, lime, maple and brown sugar (and excited), and renoise_owns.
I have the crappiest, no blind, eyesight known to man. 
-
- KVRAF
- 8519 posts since 7 Apr, 2003
re: start | run | magnify
works great for my eyes too. use it a lot. there is also i think a powertoy to put it into the startbar. i cant remember though for sure.
works great for my eyes too. use it a lot. there is also i think a powertoy to put it into the startbar. i cant remember though for sure.
-
- KVRAF
- 8519 posts since 7 Apr, 2003
actually n/m you can dock it by dragging the window. it's quite a nice little tool and it's built into windows xp (probably still inside vista too).
hope that helps. i'm not going to be making any large version -- wayyyyyy too much work involved. however, the source PSD files are on my site and anyone can use them as a basis for their own or enlarge them or whatever.
it's too bad it's not as simple as batch enlarging the skin images by a ratio of 1.25 or something, but the OMS skin format would require massive edits doing that, the X|Y offset system used is very precise and very capable, but also very deep and sometimes endless to do a skin from scratch
try that magnifier and see if it works out ok for you.
hope that helps. i'm not going to be making any large version -- wayyyyyy too much work involved. however, the source PSD files are on my site and anyone can use them as a basis for their own or enlarge them or whatever.
it's too bad it's not as simple as batch enlarging the skin images by a ratio of 1.25 or something, but the OMS skin format would require massive edits doing that, the X|Y offset system used is very precise and very capable, but also very deep and sometimes endless to do a skin from scratch
try that magnifier and see if it works out ok for you.
-
Reverse Engineer Reverse Engineer https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=9129
- KVRAF
- 4968 posts since 23 Sep, 2003 from Glasgow
I'll give the magnifier thing a try 
I wish it was as easy as just enlarging the files to blindboy proportions, cos those skins are just sublime.
I wish it was as easy as just enlarging the files to blindboy proportions, cos those skins are just sublime. -
- KVRian
- 1209 posts since 28 Jun, 2005
Grymm you forgot the zero in this part of the oms.grymmjack wrote:ttoz; the arp bug is simple to see, right click a arp step and choose all of the options, do they all make sense? i cant figure out what i'm doing wrong in my skin but sometimes the random step type shows up where it shouldn't and sometimes the other steps are offset by 1 slot.
a guy emailed me and said he fixed it, but i cant for the life of me find the email and so i'm bummed out. i was hoping to include his fix into the new versions of the skins but unless he pops in here, i have no way to get ahold of him nor can i find the messages he sent me. i cant remember if he did it with email, or IM, or what and so i'm out of luck there.
i'd fix it if i could understand wtf is going on but everything seems to be setup properly in the oms file and the graphics both. it drove me a little insane earlier. no time now to deeply dive in and try harder got work to do for job but it's frustrating.
it's fine as long as you dont do anything with the last 3 or 4 arp steps
@control
src=gj-maple\arp.png
name=arppatternsw
type=switch
size=9,16
frames=16
x=166,0,12,23,34,45,56,67,78,89,100,111,122,133,144,155
y=1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
Now it works perfectly...
Gr.
-
- KVRAF
- 8519 posts since 7 Apr, 2003
i wish it was too man. thanks. if you are looking for a big UI for synth work try cobalt. might not be as flexible as oatmeal but imo it's 100x easier to work with and it sounds very beautiful.
-
- KVRAF
- 8519 posts since 7 Apr, 2003
THANK YOU YEAGER 
will update the zips.
it's amazing how insane 1 little character can drive you.
will update the zips.
it's amazing how insane 1 little character can drive you.
-
- Banned
- 22457 posts since 5 Sep, 2001
[DELETED]
-
Reverse Engineer Reverse Engineer https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=9129
- KVRAF
- 4968 posts since 23 Sep, 2003 from Glasgow
Swap out oatmealgrymmjack wrote:i wish it was too man. thanks. if you are looking for a big UI for synth work try cobalt. might not be as flexible as oatmeal but imo it's 100x easier to work with and it sounds very beautiful.
NEVER!!! 
I'm fine with the default large oatmeal skin, it's just that it's not the prettiest thing around, but nonetheless, it does encapsulate a heart of pure gold. 
-
- KVRAF
- 7028 posts since 28 Apr, 2004 from france
Mmmh... Just thinking out loud...
Did anybody tried to make a similar skin for the mighty Chariesis ?
Did anybody tried to make a similar skin for the mighty Chariesis ?
-
- KVRist
- 452 posts since 8 Jul, 2004
Heaps of thanks to both of you, fuzzpilz for creating and maintaining this sonic swiss knife and to grymmjack for these beautiful and useable skins!
