KVR Audio

otristan · Post by **otristan** » Fri Jul 11, 2008 11:03 am

Dudulle wrote:Hi there,

Got a few problems and bugs too:

*when using as a vst in Cubase SL3; impossible to load the sounds when I re-open the project file (.cpr).

Do you have sample missing errors ?
Or you cannot open the browser anymore ?

Could you give us more details ?

Dudulle wrote: * Bug with Autotune 5 vst and pace drivers : Autotune 5 is not authorized to run when UVIWorkstation is loaded.

Hummm... very strange.
I'll contact PACE about this.
Maybe some quirks in Autotune, because I don't know any problem running with other paced application.

Dudulle wrote: Important question: is the UVIWorkstation working well with an ATI X300/X550 graphic card ?

Xp SP2 - PIV 3.2Ghz - P5GD2 Premium motherboard - ATI X300/X550 graphic card - 3 Go RAM - 2 SATA 250Go HDD .

Thanks.

We no more use OpenGL at all, so it should works perfectly.
Software rendering in Juce avoid graphic card issues we had in the past.

Thanks for your report.

tombuur · Post by **tombuur** » Fri Jul 11, 2008 11:19 am

"We no more use OpenGL at all, so it should works perfectly.
Software rendering in Juce avoid graphic card issues we had in the past. "

Yes, no more black windows here. And thanks for the frequent updates now. That's also a new and appreciated attitude.

As to pace problems. Please make installation of Pace an option. Most of us have the most recent Pace software anyway, and someday in the future we will have newer Pace software than the version installed with UVI Workstation.

And even though UVIW is not skinable, there could be some way to adjust colors to get more contrast, like Cubase does it for instance, or just during install.

ViktorW · Post by **ViktorW** » Fri Jul 11, 2008 11:57 am

Just installed the new 1.04 version. Only played with the standalone version, couldn't make it crash so far, very cool.

But!
Again, as in earlier versions, my midi keyboard isn't recognized, can't play anything in standalone version.

Viktor

Dudulle · Post by **Dudulle** » Fri Jul 11, 2008 12:36 pm

otristan wrote:
Dudulle wrote:Hi there,

Got a few problems and bugs too:

*when using as a vst in Cubase SL3; impossible to load the sounds when I re-open the project file (.cpr).
Do you have sample missing errors ?
Or you cannot open the browser anymore ?

Could you give us more details ?

Well I have a message "Couldn't load XXXXX file/sample in UVI" or something like this in the UVIWorkstation VST Browser.

Great to finally have answers and exchange with you guys about bugs and problems (even if it's only a public beta test...).
Being a USB user since plugsound box; I was really pissed off with the PlugsoundPro case...

But, I hope this UVIworkstation will make my day this time

Xp SP2 - PIV 3.2Ghz - P5GD2 Premium motherboard - ATI X300/X550 graphic card - 3 Go RAM - 2 SATA 250Go HDD .

tombuur wrote:"

As to pace problems. Please make installation of Pace an option. Most of us have the most recent Pace software anyway, and someday in the future we will have newer Pace software than the version installed with UVI Workstation.

And even though UVIW is not skinable, there could be some way to adjust colors to get more contrast, like Cubase does it for instance, or just during install.

+1

ViktorW · Post by **ViktorW** » Fri Jul 11, 2008 12:44 pm

ViktorW wrote:Just installed the new 1.04 version. Only played with the standalone version, couldn't make it crash so far, very cool.

But!
Again, as in earlier versions, my midi keyboard isn't recognized, can't play anything in standalone version.

Viktor

Apart from my midi keyboard not being recognized in standalone,
the new version still crashes Cubase when having a loop loaded and in the "loop" tab switching too quickly between the stretch and slice modes.

Viktor

mdsp · Post by **mdsp** » Fri Jul 11, 2008 1:25 pm

tombuur wrote:As to pace problems. Please make installation of Pace an option. Most of us have the most recent Pace software anyway, and someday in the future we will have newer Pace software than the version installed with UVI Workstation.

Well, we're just calling the standard pace installer within our installer.

So if you already have it, or have a more recent version in future it shouldn't install anything because it's already there. We do the same for Rex support and microsoft runtime dlls. Their installer should make sure that it doesn't overwrite a newer version by an older one.

jobromedia · Post by **jobromedia** » Fri Jul 11, 2008 2:34 pm

That is really good since many here tend to complain about PACE if I'm correct.

I took the opportunity to spread the word about this amazing workstations to a few other forums might be good if you pick up comments and errors from them as well.

http://forum.screamer-hardstyle.com/vie ... hp?t=24609
As a moderator I try to inform about cool plugins.

http://www.whoa.nu/forum/producenter-oc ... 21183.aspx
A swedish hiphop community that recieved this very well. It seams that they like the idea pretty much and may have some additional suggestions and comments to say.

Selfik · Post by **Selfik** » Fri Jul 11, 2008 2:39 pm

ViktorW wrote:...the new version still crashes Cubase when having a loop loaded and in the "loop" tab switching too quickly between the stretch and slice modes.Viktor

crashes XT2 also, nasty one!

otristan · Post by **otristan** » Fri Jul 11, 2008 5:19 pm

jobromedia wrote: http://www.whoa.nu/forum/producenter-oc ... 21183.aspx
A swedish hiphop community that recieved this very well. It seams that they like the idea pretty much and may have some additional suggestions and comments to say.

I think our swedish is not that good

Feel free to post back here comments you'll find useful.

Thanks,

hibidy · Post by **hibidy** » Fri Jul 11, 2008 5:20 pm

@no keyboard control

make sure you do not have more than one controller clicked in standalone. I don't know if this is a bug if it's supposed to be that way but I can not have my keyboard AND padkontrol clicked at the same time.

otristan · Post by **otristan** » Fri Jul 11, 2008 5:31 pm

hibidy wrote:@no keyboard control

make sure you do not have more than one controller clicked in standalone. I don't know if this is a bug if it's supposed to be that way but I can not have my keyboard AND padkontrol clicked at the same time.

It's a bug.
We'll take a look.

spidermix · Post by **spidermix** » Fri Jul 11, 2008 6:37 pm

Wow...Stability seems to get worse with every release using Cubase 4 on Leopard. The plugin crashes cubase on close, and also crashes Cubase when trying to remove the plugin from the synth rack. Very unfortunate.

I'm going to have to go back to plugsound pro until this is sorted out.

SpiderMix

jobromedia · Post by **jobromedia** » Fri Jul 11, 2008 7:28 pm

Somehow I cannot get the filter envelope working.

The patch is "Raw sub to lead light" if I got the name right.

And what you must put topmost on your todo list is to check for memory leaks. I've got bluescreened!

otristan · Post by **otristan** » Fri Jul 11, 2008 7:44 pm

spidermix wrote:Wow...Stability seems to get worse with every release using Cubase 4 on Leopard. The plugin crashes cubase on close, and also crashes Cubase when trying to remove the plugin from the synth rack. Very unfortunate.

I'm going to have to go back to plugsound pro until this is sorted out.

SpiderMix

We've just fixed this issue.
Will be available in 1.0.5 that we'll try to release very soon.
(probably on the 15th)

Thanks for the report.

otristan · Post by **otristan** » Fri Jul 11, 2008 7:46 pm

jobromedia wrote:Somehow I cannot get the filter envelope working.

The patch is "Raw sub to lead light" if I got the name right.

And what you must put topmost on your todo list is to check for memory leaks. I've got bluescreened!

Hummm wecheck regulary memory leaks.. and AFAIK there is none.
Usually bluescreen is more a driver issue than memory leaks.

mAudio soundcard drivers maybe ?

UVI Workstation (release)