MU.LAB 2.0 PreRelease E
- KVRAF
- 13862 posts since 24 Jun, 2008 from Europe
MU.LAB 2.0 PreRelease E has been released.
What's changed:
* Tuned: MuSynth and MUX Deep Editors: Parameter context menu now also includes "Rename Parameter"
* Tuned: Sequence Editor: You can now also set the Loop-End region by dragging a zone in the timebar, cfr the Composer
* Tuned: Sequence Editor: Paste Events now also uses a dialog box to edit the paste position, cfr the Composer
* Tuned: To Move Tracks, Racks and Rack plugs, you can just drag around, no [Shift] required anymore
* Tuned: Right-click Track Icon pops up context menu
* Fixed: When recording events, then choose "Overwrite", then Undo => Previous Start/Loop/End was not restored
* Fixed: When loading Sampla / Multisampla patches, the front meta knobs were not always refreshed
* Fixed: In some cases there could be a hanging audio noise when using vst plugins
* Fixed: When recording events while having a selected sequence part, then pressing [Esc] or clicking Cancel did not always cancel the recording
* Fixed: When dropping a plug on another plug in the rackdesk + "Keep in MPA" -> plug was not visible in MPA
If you already have installed PreRelease D, you can just copy the new application file into your current mulab folder, this way you can avoid a resetup.
This PreRelease is regarded as a first Release candidate.
What's changed:
* Tuned: MuSynth and MUX Deep Editors: Parameter context menu now also includes "Rename Parameter"
* Tuned: Sequence Editor: You can now also set the Loop-End region by dragging a zone in the timebar, cfr the Composer
* Tuned: Sequence Editor: Paste Events now also uses a dialog box to edit the paste position, cfr the Composer
* Tuned: To Move Tracks, Racks and Rack plugs, you can just drag around, no [Shift] required anymore
* Tuned: Right-click Track Icon pops up context menu
* Fixed: When recording events, then choose "Overwrite", then Undo => Previous Start/Loop/End was not restored
* Fixed: When loading Sampla / Multisampla patches, the front meta knobs were not always refreshed
* Fixed: In some cases there could be a hanging audio noise when using vst plugins
* Fixed: When recording events while having a selected sequence part, then pressing [Esc] or clicking Cancel did not always cancel the recording
* Fixed: When dropping a plug on another plug in the rackdesk + "Keep in MPA" -> plug was not visible in MPA
If you already have installed PreRelease D, you can just copy the new application file into your current mulab folder, this way you can avoid a resetup.
This PreRelease is regarded as a first Release candidate.
-
- KVRist
- 169 posts since 2 May, 2003 from Home, sweet home.
Great!
And what a great time for a new(ish) skin, too!
Feel free to download LooxOrange here:
http://users.hol.gr/~sogou/muzys/LooxOrange.zip
Unzip it in the Graphics directory,
preserving the directory structure.
Hope you'll like it ...
Jo, great work!
[/img]
And what a great time for a new(ish) skin, too!
Feel free to download LooxOrange here:
http://users.hol.gr/~sogou/muzys/LooxOrange.zip
Unzip it in the Graphics directory,
preserving the directory structure.
Hope you'll like it ...
Jo, great work!
[/img]
-
- KVRer
- 23 posts since 7 Jul, 2008
Hello,
I've noticed that in the MU.LAB 2 the MIDI Keyboard behaviour has changed somehow. I don't know how, and that's the problem.
I cannot exactly tell you what's the new behaviour, and that disturbs me, because so I don't know why it is not working or when can I get it work. My only way to get sound from my MIDI keyboard using MU.LAB 2 was to play with the parameters, trying to load a new synth...
What I get used to: when under in the Racks I select rack by clicking on it and press a key on the MIDI keyboard, I hear the sound of the configured synth. Now it works not always as I'm expecting. Sometimes I should select the appropriate synth on the sidebar of the composition, selecting the correct track. Sometimes it's not enough.
It would be good if it was more clear what to do to hear the sound of the synth. The best would be when it worked just as before, simply by selecting the rack of the synth.
Best Regards,
Adam
I've noticed that in the MU.LAB 2 the MIDI Keyboard behaviour has changed somehow. I don't know how, and that's the problem.
I cannot exactly tell you what's the new behaviour, and that disturbs me, because so I don't know why it is not working or when can I get it work. My only way to get sound from my MIDI keyboard using MU.LAB 2 was to play with the parameters, trying to load a new synth...
What I get used to: when under in the Racks I select rack by clicking on it and press a key on the MIDI keyboard, I hear the sound of the configured synth. Now it works not always as I'm expecting. Sometimes I should select the appropriate synth on the sidebar of the composition, selecting the correct track. Sometimes it's not enough.
It would be good if it was more clear what to do to hear the sound of the synth. The best would be when it worked just as before, simply by selecting the rack of the synth.
Best Regards,
Adam
-
- Hun #3
- 4265 posts since 25 Mar, 2002 from A quaint little village just south of Hamburg, Germany
Jo - there's a strange bug in this version. Whenever I try to create a new sequence in a new project it crashes MU.LAB on the spot, rendering it practically useless.
Old projects load O.K, I just can't create a new sequence.
OSX 10.4.11
http://www.fileden.com/files/2007/5/13/ ... ktober.txt
Marco
Old projects load O.K, I just can't create a new sequence.
OSX 10.4.11
http://www.fileden.com/files/2007/5/13/ ... ktober.txt
Marco
-
- KVRist
- 169 posts since 2 May, 2003 from Home, sweet home.
The same happens in Win XP Pro sp2, i'm afraid ...Bonteburg wrote:Jo - there's a strange bug in this version. Whenever I try to create a new sequence in a new project it crashes MU.LAB on the spot, rendering it practically useless.
Old projects load O.K, I just can't create a new sequence.
OSX 10.4.11
Marco
- KVRAF
- Topic Starter
- 13862 posts since 24 Jun, 2008 from Europe
Damn, indeed
Thanks for spotting this li'l bastard bug so fast guys!!
The packages are updated, so please redownload again.
Version should say PreRelease E2 now.
And the bug must be dead
Thanks for spotting this li'l bastard bug so fast guys!!
The packages are updated, so please redownload again.
Version should say PreRelease E2 now.
And the bug must be dead
- KVRAF
- 7412 posts since 8 Feb, 2003 from London, UK
Damn, I no longer have a complete collection of all versions ever issued! 
-
- KVRAF
- 5573 posts since 30 May, 2006 from Hollow Earth
Very nice. Keep going.Sotiris wrote:Great!
And what a great time for a new(ish) skin, too!
Feel free to download LooxOrange here:
http://users.hol.gr/~sogou/muzys/LooxOrange.zip
Unzip it in the Graphics directory,
preserving the directory structure.
Hope you'll like it ...
[/img]
ABEFLGMOPPRRST 
- KVRAF
- Topic Starter
- 13862 posts since 24 Jun, 2008 from Europe
Indeed, it has changed a bit since the coming of the Track Targets.admc wrote:I've noticed that in the MU.LAB 2 the MIDI Keyboard behaviour has changed somehow...
But i agree with your criticism and am working on a finetuned update in order to have an easy to understand and consistent behaviour.
Talk soon.
- KVRAF
- Topic Starter
- 13862 posts since 24 Jun, 2008 from Europe
Mmm, still a couple of points to be finetunedmutools wrote:This PreRelease is regarded as a first Release candidate.
